Multi-bright-dark soliton solutions to the AB system in nonlinear optics

The AB system is the basic integrable model to describe unstable baroclinic wave packets in geophysical fluids and the propagation of mesoscale gravity flows in nonlinear optics. On the basis of the spectral analysis of a Lax pair and the inverse scattering method, we establish the Riemann–Hilbert problem of the AB system. Then, the inverse problems are formulated and solved with the aid of the Riemann–Hilbert problem, from which the potentials can be reconstructed according to the asymptotic expansion of the sectional analytic function and the related symmetry relations. As an application, we obtain the multi-bright-dark soliton solutions to the AB system in the reflectionless case and discuss the dynamic behavior of elastic soliton collisions by choosing appropriate free parameters.     

Refined Composite Multi-Scale Reverse Weighted Permutation Entropy and Its Applications in Ship-Radiated Noise

Ship-radiated noise is one of the important signal types under the complex ocean background, which can well reflect physical properties of ships. As one of the valid measures to characterize the complexity of ship-radiated noise, permutation entropy (PE) has the advantages of high efficiency and simple calculation. However, PE has the problems of missing amplitude information and single scale. To address the two drawbacks, refined composite multi-scale reverse weighted PE (RCMRWPE), as a novel measurement technology of describing the signal complexity, is put forward based on refined composite multi-scale processing (RCMP) and reverse weighted PE (RWPE). RCMP is an improved method of coarse-graining, which not only solves the problem of single scale, but also improves the stability of traditional coarse-graining; RWPE has been proposed more recently, and has better inter-class separability and robustness performance to noise than PE, weighted PE (WPE), and reverse PE (RPE). Additionally, a feature extraction scheme of ship-radiated noise is proposed based on RCMRWPE, furthermore, RCMRWPE is combined with discriminant analysis classifier (DAC) to form a new classification method. After that, a large number of comparative experiments of feature extraction schemes and classification methods with two artificial random signals and six ship-radiated noise are carried out, which show that the proposed feature extraction scheme has better performance in distinguishing ability and stability than the other three similar feature extraction schemes based on multi-scale PE (MPE), multi-scale WPE (MWPE), and multi-scale RPE (MRPE), and the proposed classification method also has the highest recognition rate.     

LaAlO_3/SrTiO_3界面增强光伏效应

探索LaAlO_3/SrTiO_3(LAO/STO)界面产生的新奇物理特性对理解关联电子系统中多自由度耦合和设计功能材料器件具有重要的价值.本文通过脉冲激光沉积方法在SrTiO_3基底上制备了LAO/STO薄膜,研究了正面照射LAO/STO膜面和侧面照射LAO/STO界面时的光伏效应,探讨了LAO/STO界面对光伏效应的影响.研究结果表明,在同样光照能量下侧面照射LAO/STO界面产生的光电压远高于正面照射LAO/STO膜面产生的光电压,说明LAO/STO界面对光伏效应有明显的增强作用.通过偏压调控可以进一步增强照射LAO/STO界面产生的光电压,当偏压为60 V时, LAO/STO样品的位置探测灵敏度达到了36.8 mV/mm.这些研究结果为设计场调控位置敏感探测器等新型光电子器件提供了新的思路.     

离散式任意充磁角度Halbach永磁电机解析模型研究

Halbach电机因其自身优势在新型船舶推进、海洋洋流发电等方面受到广泛关注. 本文在假设铁磁材料线性和定子内表面光滑的条件下, 通过将任意充磁角度Halbach阵列等效为两组90° Halbach(或180° Halbach)阵列的矢量合成, 提出了一种分析离散式任意充磁角度Halbach永磁电机气隙磁场的解析方法; 通过对电机中磁标量势的傅里叶级数进行计算, 推导出了最简单的90° Halbach永磁电机在极坐标系下的气隙磁密表达式, 并在此基础上, 给出了任意充磁角度Halbach电机永磁体磁化强度在一个极下的表达式, 进而得出任意充磁角度Halbach电机气隙磁密的分布, 并分析了气隙磁密与电机极对数、永磁体厚度和充磁角度间的关系. 最后通过有限元和试验结果验证了本文方法的正确性. 关键词： 离散式Halbach电机 任意充磁角度 矢量等效 解析模型     

EicC对撞光学设计

EicC是中国科学院近代物理研究所计划建造的中国电子-离子对撞机装置,该对撞机质心能位于20 GeV附近,是研究海夸克的最佳能量窗口,同时还可研究胶子和价夸克。EicC对撞粒子为高极化率质子和电子束团,质子环pRing采用八字环设计方案,可以更好地保持极化质子束团极化率,电子环eRing采用跑道形环设计方案,可以更好地利用隧道空间。该装置电子束流能量中心值为3.5 GeV,电子束RMS发射度为水平方向60 nm·rad,垂直方向60 nm·rad,对撞点b函数为水平方向0.4 m,垂直方向0.12 m;质子束流能量中心值20 GeV,质子束RMS发射度为水平方向300 nm·rad,垂直方向180 nm·rad,对撞点b函数为水平方向0.08 m,垂直方向0.04 m,设计亮度2×1033 cm–2s–1。EicC采用双对撞区非对称光学设计,通过对EicC不同色品补偿方案的研究,最终确定了弧区加短直线节共同补偿的色品补偿方案;通过研究对撞点处b函数以及对撞点间相移对动力学孔径的影响,最终得到pRing动力学孔径大于8 s(s为束团RMS尺寸)、eRing动力学孔径大于20 s,满足大于束团尺寸6 s的要求。     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

碳纳米管的可控长度拾取及导电性分析

拾取指定长度的半导体性碳纳米管对大规模制造碳纳米管场效应管具有重要意义.本文提出了一种利用原子力显微镜探针和钨针对碳纳米管进行可控长度拾取的方法并进行了碳纳米管导电性分析.在扫描电子显微镜下搭建微纳操作系统,针对切割操作过程中原子力显微镜探针、钨针和碳纳米管的接触情况进行了力学建模和拾取长度误差分析.建立了单根金属性碳纳米管、单根半导体性碳纳米管及碳纳米管束与钨针接触的电路模型,推导了接入不同性质碳纳米管后电路的电流电压特性方程.使用原子力显微镜探针对碳纳米管的空间位姿进行调整,控制钨针对碳纳米管上目标位置进行通电切割,同时获取切割电路中的电流电压数据.实验结果表明,本文提出的方法能够有效控制所拾取碳纳米管的长度,增加碳纳米管与原子力显微镜探针的水平接触长度能够减小碳纳米管形变导致的拾取长度误差,建立的电流电压特性方程能够用于分析碳纳米管的导电性.     

Can (H2O) n (n = 1–2) as effective catalysts in the CH2OO + H2S reaction under tropospheric conditions?

The addition reaction of CH₂OO?+?H₂S → HSCH₂OOH without and with catalyst X (X?=?H₂O and (H₂O)₂) has been investigated by CCSD(T)-F12a/VTZ-F12//B3LYP/aug-cc-pVTZ method and canonical variational transition state theory with small curvature tunneling correction. When H₂O was introduced in the CH₂OO?+?H₂S reaction, it not only acts as a catalyst for producing HSCH₂OOH, but also plays as a reactant to forming HOCH₂OOH. The formation channel of HSCH₂OOH is more important than the formation channel of HOCH₂OOH with its calculated rate constant larger by 11.0–43.2 times within the temperature 280–320?K. Then, (H₂O)₂ catalysed CH₂OO?+?H₂S → HSCH₂OOH reaction has been taken into account with its rate lower 1.9–4.2 times than the reaction of CH₂OO?+?H₂S → HSCH₂OOH with water. Also, CH₂OO?+?H₂S with H₂O cannot compete with the CH₂OO?+?H₂S reaction without water. This is different from CH₂OO?+?(H₂O)₂ reaction, which is about 4 orders of magnitude larger than the rate constant for CH₂OO?+?H₂O reaction. Such discrepancy is possible because C(CH₂OO)···O(H₂O) interaction has been enhanced more obviously by H₂O as compared to that of C(CH₂OO)···O(H₂S) interaction.     

基于PLC 的中央空调制冷系统变频控制研究

针对现有中央空调系统能源消耗严重的现状,基于可编程逻辑控制器(Programmable Logic Controller,PLC)对中央空调系统进行变流量节能改造。分析改造后中央空调系统的结构组成和变频运行原理,并提出适用于冷冻水泵和冷却水泵的分段速温差控制和PID温差控制设计方案。控制硬件选用三菱FX3U系列PLC和台达VFD-EL变频器,软件选用GX Work2编程软件及力控组态软件。将控制方案进行实验验证,实验结果表明,所设计的两种控制策略不仅跟随系统末端负荷变化快速达到稳定运行状态,提高运行能效比,而且节能效果显著,节能率分别为40.2%和48.7%。     

钐(Ⅱ)类卡宾CH_3SmCH_2X(X=Cl、Br和Ⅰ)促进乙烯环丙烷化反应途径的理论研究(英文)

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理。对三种不同的钐的SS试剂CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)分别和CH_2CH_2反应的各反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化,用内禀反应坐标(IRC)计算和频率分析方法,对过渡态进行了验证。结果表明：CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)与CH_2CH_2环丙烷化反应按亚甲基转移通道(通道A)和卡宾金属化通道(通道B)都可以进行,与锂类卡宾的反应机理相同,只是按亚甲基转移通道(通道A)进行反应较容易一些,而且此反应在较低的温度下就可以发生。