From lag synchronization to pattern formation in one-dimensional open flow models

In this paper, the relation between synchronization and pattern formation in one-dimensional discrete and continuous open flow models is investigated in detail. Firstly a sufficient condition for globally asymptotical stability of lag/anticipating synchronization among lattices of these models is proved by analytic method. Then, by analyzing and simulating lag/anticipating synchronization in discrete case, three kinds of pattern of wave (it is called wave pattern) travelling in the lattices are discovered. Finally, a proper definition for these kinds of pattern is proposed.     

Engineering issue study of triple harmonic method for in situ flying height analysis

In situ flying height testing technology is becoming more and more important in slider–disk interaction analysis and manufacturing quality control of disk drives and head-related components. Triple harmonic method is a quite promising choice for in situ flying height analysis, compared with other in situ methods reported up to now. This paper reports results of investigations on engineering issues of applying triple harmonic method for in situ flying height analysis. The paper reports results of analysis on the effects of various testing conditions on flying height testing repeatability and accuracy. Results suggest that working at reasonable high channel density and working on the ratio between third and first harmonics will be an advantage in terms of both flying height testing sensitivity and testing repeatability. Comparing with media thickness effect, the gap-length variation among different heads will be important if it is to study flying height difference among different heads and the testing is at high channel density. Also, it is suggested to work at AC erased track, in order to reduce the non-linearity caused by hard transition.     

Magnetic,electrical transport and electron spin resonance studies of ferromagnetic insulating manganites Nd0.85Na0.15MnO3

We have investigated the magnetic, electrical transport and electron spin resonance (ESR) properties of polycrystalline Nd_0.85Na_0.15MnO₃ prepared by sol–gel method. A ferromagnetic–paramagnetic (FM–PM) transition is observed around 110 K, which is not accompanied by a metal–insulator transition. The sample displays the complete PM state associated with the ESR spectra fitted by single Lorentzian line shape above 130 K. Below 130 K, ESR spectra become distorted and then linewidth increases rapidly, where short-range magnetic order develops and coexists with PM phase due to the inhomogeneous magnetic state. In addition, the large difference between the activation energies obtained from the resistivity and ESR parameters (peak-to-peak linewidth and line intensity) at the frame of adiabatic small polaron hopping model is pointed out for Nd_0.85Na_0.15MnO₃.     

Different effects of cerium ions doping on properties of anatase and rutile TiO2

Pure and Ce⁴⁺ doped anatase and rutile TiO₂ were prepared by hydrothermal methods and characterized by XRD, TEM, UV-vis diffusion spectroscopy, and XPS measurements. The photocatalytic reactivity of the catalysts was evaluated by the photodegradation of Rhodamine B (RB) under ultraviolet irradiation. The photocatalytic efficiency of the rutile sample doped with an appropriate amount of Ce⁴⁺ was enhanced while all Ce⁴⁺ doped anatase samples showed a much lower activity than pure anatase. The reasons were discussed     

Chemical analysis and distribution investigation of trace elements in indium matrix by spark source mass spectrometry

Summary High-purity indium was analysed by spark source mass spectrometry, using electrical and photoplate detection. For the calibration of the differences in elemental sensitivity, a standard sample was prepared in which 10 impurities were determined by graphite furnace atomic absorption spectrometry. In this way accuracies of less than 40% were obtained for relatively homogeneous elements at ppm and sub-ppm level. About 40 elements could be determined with detection limits of 10 to 30 ppb. Two pattern recognition methods, principal component analysis and clustering analysis, were applied to obtain information on trace element distribution, which indicated that a number of elements were strongly spatially correlated in the analysed sample.

---

Chemische Analyse und Verteilungsbestimmung von Spurenelementen in Indium-Matrix durch Funkenquellen-Massenspektrometrie

---

On leave from: Department of Chemistry, Nanjing Normal University, Nanjing, People's Republic of China     

低温等离子体对塑料表面处理——低温等离子体对高密度聚乙烯表面处理的ESR研究

本文研究了不同处理条件(处理功率、处理时间和处理压力)下等离子体气体(Ar、N₂、O₂和空气等)对高密度聚乙烯表面处理产生的自由基的ESR谱。我们观察到等离子体处理产生的自由基是相当稳定的,它的ESR信号强度随处理功率和处理时间增加而增加。但处理压力对它影响不大。我们证明了紫外线对高密度聚乙烯表面产生自由基作用随处理条件而变化。并初步解释了谱的超精细相互作用。     

Controlling a bunch of multiple filaments by means of a beam diameter

We demonstrate a three orders of magnitude increase and stability in the backscattered fluorescence signal from nitrogen molecules by terawatt femtosecond laser pulse induced air filaments using a new method. The method is based on squeezing the initial beam diameter using a telescope. The effect of laser shot-to-shot fluctuations was included in numerical simulations by a random distribution of the initial intensity in both squeezed and non-squeezed beams. Statistical processing of the simulation results shows that the average diameter of plasma channels as well as the total amount of free electrons generated in a bunch of multiple filaments in air is larger in the squeezed beam. Shot-to-shot stability of the simulated plasma density increases in the squeezed beam. The change of this plasma density with propagation distance is in good qualitative agreement with the change of the range-corrected nitrogen fluorescence signal with distance. PACS 42.65.Jx; 42.60.Jf; 42.68.Ay; 42.68.Wt     

Classical, phenomenological analysis of the kinetics of reactions at the gas-exposed surface of mixed ionic electronic conductors

The kinetics of reactions occurring at the gas-exposed surfaces of charged mixed ionic electronic conductors (MIECs) are examined from theoretical first principles. Analysis based on the classical electrochemical potential-transition state theory model reveals that the nature of the reactions is electrochemical in general. However, the influence of the surface potential on the reaction rate is opposite for adsorption and incorporation reactions. Two-dimensional finite volume models of an MIEC as working electrode in a half-cell configuration are presented. The results for a simple, two-step reduction process show that the effect of the surface potential on the rate of reactions is minimal for incorporation-limited reactions but more influential for adsorption-limited reactions. An erratum to this article is available at .     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.