Self-rotation of elliptically polarized light in Doppler-broadened rubidium atoms

We present a theoretical and experimental study of self-rotation of incident elliptically polarized light on a rubidium atomic vapor. We construct density matrix equations, which are then solved numerically, and further averaged over atomic transit times and a Maxwell-Boltzmann velocity distribution. We calculate the rotation angle as a function of detuning for various laser intensities and polarizations. We compare the calculated results with experimental results and find good agreement between them.     

Single-frequency, single-mode, plane-polarized ytterbium-doped fiber master oscillator power amplifier source with 264 W of output power

We present a single-frequency, single-mode, plane-polarized ytterbium-doped all-fiber master oscillator power amplifier source at 1060 nm generating 264 W of continuous-wave output power. The final-stage amplifier operated with a high gain of 19 dB and a high conversion efficiency of 68%. There was no evidence of rollover from stimulated Brillouin scattering even at the highest output power, and the maximum output was limited only by the available pump power.     

Evidence for muon neutrino oscillation in an accelerator-based experiment

We present results for nu(mu) oscillation in the KEK to Kamioka (K2K) long-baseline neutrino oscillation experiment. K2K uses an accelerator-produced nu(mu) beam with a mean energy of 1.3 GeV directed at the Super-Kamiokande detector. We observed the energy-dependent disappearance of nu(mu), which we presume have oscillated to nu(tau). The probability that we would observe these results if there is no neutrino oscillation is 0.0050% (4.0 sigma).     

Photoluminescence of ZnO nanowires grown on sapphire (1 1 2¯ 0) substrates

ZnO nanowires were fabricated on c-plane (0 0 0 1), a-plane (1 1 2¯ 0) sapphire, and boron doped p-type (1 0 0) Si substrates in vacuum furnace by simple physical vapor deposition. Room temperature photoluminescence spectra of the nanowires show the near band-edge emission and the deep-level green light emission. The ZnO nanowires formed on sapphire (1 1 2¯ 0) substrates exhibited enhancement on optical properties and better crystalline structures than those of nanowires grown on other substrates. The formation mechanism and the effect of substrate direction on structural and optical properties of the nanowires are discussed.     

Electronic structure and optical absorption spectra of CdSe covered with ZnSe and ZnS epilayers

Using the first-principles methods we compute the electronic structure and the absorption spectra for a wurtzite CdSe (0001) slab covered with zincblende ZnSe and ZnS epilayers. For each structure we compute the DOS and the imaginary part of the dielectric function. We find that the semiconductor passivation shifts the ‘near Fermi-level’ states of the bare CdSe slab down to lower energy levels. The migration suggests the decrease of surface effects and energy loss. We observe the substantial reduction of the abnormal peaks in the absorption spectra of the bare CdSe slab, which seems to be a consequence of the DOS migration. This is consistent with the experimental results that a proper passivation enhance the luminescence efficiency. We also study the case that the epilayer surface is terminated with PH₃ and find the PH₃ passivation also reduces the surface state to some extent.     

Toughening poly(lactic acid) (PLA) through in situ reactive blending with liquid polybutadiene rubber (LPB)

Abstract

Liquid polybutadiene rubber (LPB) was blended with poly(lactic acid) (PLA) through reactive and non-reactive routes to enhance the toughness of the PLA. The reactively blended PLA (PBR10) was prepared by melt blending the PLA with the LPB in the presence of dicumyl peroxide (DCP), a radical initiator, while the PB10 was just melt blended without the DCP. Fourier transform infrared (FTIR) spectra and wide-angle X-ray diffraction (WAXD) patterns were used to study the molecular structure of the blends. Properties were investigated through universal testing machine (UTM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscope (SEM) analysis, and rheological measurements. The results indicated that the radical crosslinking by the DCP could increase the compatibility between the PLA and LPB and disperse the rubber particles at the nanoscale in the PLA matrix. As a result, the toughness and melt viscosity of the PLA was significantly enhanced through the reactive blending, which is promising for the practical application of the modified PLA in the area of packaging.     

Ultrawidely tunable single-mode fiber acousto-optic filter

A single-mode fiber (SMF) acousto-optic tunable filter (AOTF) with a tuning range of more than 300 nm is demonstrated. The SMF used in the experiment has a ring of symmetric holes within the cladding, which causes a larger mode-index difference between the first and the second higher-order antisymmetric modes than those of a conventional SMF. As a result, the difference in beatlengths between the core mode and the higher-order modes is highly increased, which makes it possible for the SMF AOTF to exhibit a single resonance peak in the transmission spectrum over the wavelength range of 1.3-1.6 μm for given acoustic frequencies of 3.1-3.8 MHz.     

Efficient high-power frequency doubling of distributed Bragg reflector tapered laser radiation in a periodically poled MgO-doped lithium niobate planar waveguide

We report on efficient single-pass, high-power second-harmonic generation in a periodically poled MgO-doped LiNbO3 planar waveguide using a distributed Bragg reflector tapered diode laser as a pump source. A coupling efficiency into the planar waveguide of 73% was realized, and 1.07 W of visible laser light at 532 nm was generated. Corresponding optical and electro-optical conversion efficiencies of 26% and 8.4%, respectively, were achieved. Good agreement between the experimental data and the theoretical predictions was observed.     

Molecular dynamics simulation study on graphene-nanoribbon-resonators tuned by adjusting axial strain

A tunable graphene-nanoribbon (GNR)-resonator was investigated via classical molecular dynamics simulations. Resonance frequencies increased with increasing externally applied gate-force and axial-strain, and could be tuned above several hundred GHz. Tunable resonance frequencies achieved from the gate force were higher than those achieved from the axial-strain. The operating frequencies of GNR-resonators without axial-strain or with small axial-strains were most widely tuned by the gate, and almost linearly increased with increasing mean deflection. As the axial strain increased, the tunable ranges of the GNR-resonators were exponentially decreased, although the operating frequencies increased. GNR-resonators without axial-strain could be applied to wide-range-tuners, whereas GNR-resonators with high axial-strain could be applied to high-frequency-fine-tuners.