New correlation equations for predicting filter coefficient ratio of submicron particles at high ionic strength when the diffusiophoretic effect is considered

New correlation equations for the deep-bed filtration, including the term of diffusiophoresis, in addition to the Derjaguin and Landau, Verwey and Overbeek interactions, the Brownian diffusion and the interception, for predicting the initial collection efficiency under the favorable deposition condition and the filter coefficient ratio under the unfavorable deposition condition are derived by using the Brownian dynamics-simulation method. These new correlation equations for predicting the filter coefficient ratio are able to describe previous experimental results especially well for those submicron particles that are at high ionic strength.     

A Simple Approach for Multi‐fidelity Experimentation Applied to Financial Engineering

In practical applications, information about the accuracy or ‘fidelity’ of alternative surrogate systems may be ambiguous and difficult to determine. To address this problem, we propose to treat surrogate system fidelity level as a categorical factor in optimal response surface design. To design the associated experiments, we apply the Expected Integrated Mean Squared Error optimal design criterion, which takes into account both variance and bias errors. The performance of the proposed design was compared using three test cases to four types of alternatives using the Empirical Integrated Squared Error. Because of its ability to foster relatively accurate predictions, the proposed design is recommended in fidelity experimental design, particularly when the experimenters lack sufficient information about the fidelity levels of surrogate systems. The method was applied to the case of intraday trading optimization in which data were collected from the Taiwan Futures Exchange. We also calculated the implied volatility from the Merton's Jump‐diffusion model via the fast Fourier transform algorithm with three different models of varying fidelity levels. Copyright © 2014 John Wiley & Sons, Ltd.     

Dinitrosyl Iron Complex [K-18-crown-6-ether][(NO)2Fe(MePyrCO2)]: Intermediate for Capture and Reduction of Carbon Dioxide

Continued efforts are made for the utilization of CO₂ as a C₁ feedstock for regeneration of valuable chemicals and fuels. Mechanistic study of molecular (electro-/photo-)catalysts disclosed that initial step for CO₂ activation involves either nucleophilic insertion or direct reduction of CO₂. In this study, nucleophilic activation of CO₂ by complex [(NO)₂Fe(μ-^MePyr)₂Fe(NO)₂]²⁻ ( 2 , ^MePyr=3-methylpyrazolate) results in the formation of CO₂-captured complex [(NO)₂Fe(^MePyrCO₂)]⁻ ( 2-CO₂ , ^MePyrCO₂=3-methyl-pyrazole-1-carboxylate). Single-crystal structure, spectroscopic, reactivity, and computational study unravels 2-CO₂ as a unique intermediate for reductive transformation of CO₂ promoted by Ca²⁺. Moreover, sequential reaction of 2 with CO₂, Ca(OTf)₂, and KC₈ established a synthetic cycle, 2 → 2-CO₂ → [(NO)₂Fe(μ-^MePyr)₂Fe(NO)₂] ( 1 ) → 2 , for selective conversion of CO₂ into oxalate. Presumably, characterization of the unprecedented intermediate 2-CO₂ may open an avenue for systematic evaluation of the effects of alternative Lewis acids on reduction of CO₂.     

Bucillamine Inhibits UVB-Induced MAPK Activation and Apoptosis in Human HaCaT Keratinocytes and SKH-1 Hairless Mouse Skin

Ultraviolet B (UVB) radiation is known as a culprit in skin carcinogenesis. We have previously reported that bucillamine (N-[2-mercapto-2-methylpropionyl]-L-cysteine), a cysteine derivative with antioxidant and anti-inflammatory capacity, protects against UVB-induced p53 activation and inflammatory responses in mouse skin. Since MAPK signaling pathways regulate p53 expression and activation, here we determined bucillamine effect on UVB-mediated MAPK activation in vitro using human skin keratinocyte cell line HaCaT and in vivo using SKH-1 hairless mouse skin. A single low dose of UVB (30 mJ cm⁻²) resulted in increased JNK/MAPK phosphorylation and caspase-3 cleavage in HaCaT cells. However, JNK activation and casaspe-3 cleavage were inhibited by pretreatment of HaCaT cells with physiological doses of bucillamine (25 and 100 µm ). Consistent with these results, bucillamine pretreatment in mice (20 mg kg⁻¹) inhibited JNK/MAPK and ERK/MAPK activation in skin epidermal cells at 6–12 and 24 h, respectively, after UVB exposure. Moreover, bucillamine attenuated UVB-induced Ki-67-positive cells and cleaved caspase-3-positive cells in mouse skin. These findings demonstrate that bucillamine inhibits UVB-induced MAPK signaling, cell proliferation and apoptosis. Together with our previous report, we provide evidence that bucillamine has a photoprotective effect against UV exposure.     

Module-Designed Carbon-Coated Separators for High-Loading,High-Sulfur-Utilization Cathodes in Lithium–Sulfur Batteries

Lithium–sulfur batteries have great potential as next-generation energy-storage devices because of their high theoretical charge-storage capacity and the low cost of the sulfur cathode. To accelerate the development of lithium–sulfur technology, it is necessary to address the intrinsic material and extrinsic technological challenges brought about by the insulating active solid-state materials and the soluble active liquid-state materials. Herein, we report a systematic investigation of module-designed carbon-coated separators, where the carbon coating layer on the polypropylene membrane decreases the irreversible loss of dissolved polysulfides and increases the reaction kinetics of the high-loading sulfur cathode. Eight different conductive carbon coatings were considered to investigate how the materials’ characteristics contribute to the lithium–sulfur cell’s cathode performance. The cell with a nonporous-carbon-coated separator delivered an optimized peak capacity of 1112 mA∙h g⁻¹ at a cycling rate of C/10 and retained a high reversible capacity of 710 mA∙h g⁻¹ after 200 cycles under lean-electrolyte conditions. Moreover, we demonstrate the practical high specific capacity of the cathode and its commercial potential, achieving high sulfur loading and content of 4.0 mg cm⁻² and 70 wt%, respectively, and attaining high areal and gravimetric capacities of 4.45 mA∙h cm⁻² and 778 mA∙h g⁻¹, respectively.     

Improvement of <Emphasis Type="Italic">n</Emphasis>-ZnO/<Emphasis Type="Italic">p</Emphasis>-Si photodiodes by embedding of silver nanoparticles

The photo-current of n-ZnO/p-Si heterojunction photodiodes was improved by embedding Ag nanoparticles in the interface (ZnO/nano-P_Ag/p-Si), and the ratio between photo- and dark-current increased by about three orders more than that of a n-ZnO/p-Si specimen. The improvement in the photo-current resulted from the light scattering of embedded Ag nanoparticles. The I–V curve of n-ZnO/p-Si degraded after thermal treatment (A-ZnO/p-Si) because the silicon robbed the oxygen from ZnO to form amorphous silicon dioxide and left an oxygen vacancy. Notably, the properties of ZnO/nano-P_Ag/p-Si were better in the time-dependent photoresponse under 10 V bias. Ag nanoparticles (15–20 nm) scattered the UV light randomly and increased the probability for the absorption of ZnO to enhance the properties of the photodiode.     

Pulsed spark-discharge assisted synthesis of colloidal gold nanoparticles in ethanol

A green method, using pulsed spark-discharge (PSD) to synthesize gold nanoparticles (AuNPs) in ethanol, is studied in this article. Unlike conventional methods for metal nanoparticles synthesis, the PSD method does not require the addition of chemical surfactants and stabilizers. The size of PSD–AuNPs is examined by transmission electron microscopy, with a range 5–50 nm. The chemical compounds, crystal structure, and surface plasmon resonance of PSD–AuNPs are studied using energy dispersive X-ray spectroscopy, X-ray diffraction, and UV–Visible spectroscopy, respectively. Zeta potential analysis shows that a negative charge (−40 mV) on the surface of the PSD–AuNPs may be contributing to the stability of the suspension. During the gold electrodes discharge in the ethanol, under an intensive electric field and thermal energy, bulk metallic gold and ethanol may produce AuNPs and varieties of chemical derivatives, which are also studied by GC/MS and FTIR to investigate the suspension mechanism. The analysis results show that there is an oxidation reaction of ethanol occurring during the PSD process to produce ethanol derivatives, such as acetaldehyde, acetic acid, and ethyl acetate, which may modify the surface of AuNPs by coordination of oxygen atoms. However, only acetic acid can form a negative charge by the deprotonation of the carboxylic group of surface in ethanol, resulting in the creation of a repulsion force between the particles to form the stable colloid system. The experimental results indicate that PSD is an alternative green process to synthesize gold nanoparticles suspension in ethanol. Moreover, with a gold rod consumption rate of 15 mg/L, concentrations of gold nanoparticles ~9 ppm have been observed; therefore, the net production rate is around 60%.     

Molecular mobility in polymer thin films

Fluorescence recovery after photobleaching was used to measure in-plane dye-probe diffusion coefficients, D, in thin films of monodisperse polystyrene supported on fused quartz substrates. The substrates were prepared with a high density of surface hydroxyl groups which interact favorably with repeat units of the polymer. The effects of temperature and film thickness were investigated, at temperatures above the bulk glass transition of the polymer, T(g), and in the range of film thicknesses from 1-10(2) times the radius of gyration (R(g)) of individual polymer molecules. As the film thickness decreases towards R(g) the value of D increases above the bulk values, with significant effects first appearing in films approximately 20R(g). In the thinnest films studied, about 4R(g), the values of D lie as much as two orders over bulk values. At the same time, the temperature dependence of D becomes much weaker than in bulk. Analysis by free volume theory indicates that apparent values of both T(g) and the thermal expansion coefficient for liquid state, alpha(L), decrease as the film thickness decreases. The possible effects of surface segregation of the dye probe are discussed.     

Single-Shot Diffusion Measurement in Laser-Polarized Gas

A single-shot pulsed gradient stimulated echo sequence is introduced to address the challenges of diffusion measurements of laser polarized 3He and 129Xe gas. Laser polarization enhances the NMR sensitivity of these noble gases by >10(3), but creates an unstable, nonthermal polarization that is not readily renewable. A new method is presented which permits parallel acquisition of the several measurements required to determine a diffusive attenuation curve. The NMR characterization of a sample's diffusion behavior can be accomplished in a single measurement, using only a single polarization step. As a demonstration, the diffusion coefficient of a sample of laser-polarized 129Xe gas is measured via this method.