Formation of lead pyrophosphate glass and the role of anion disproportionation

Thermal, spectroscopic and electrical properties of lead pyrophosphate glass prepared by melt quenching have been examined. A model based on the structural disproportionation of the P₂O ₇ ⁴⁻ ions has been proposed and is shown to consistently explain all the observations. The equilibrium of various anionic species has been discussed on the basis of their electronegativities which are in turn related to their basicities. Communication No. 129 from the Materials Research Centre     

Features of evolution of the substructure in the creep of dispersion-hardened nickel

A study is made of the laws governing high-temperature creep and the evolution of the substructure in dispersion-hardened alloy Ni — 3 vol. % HfO₂ during its free annealing and creep. The polygonized substructure was formed in the alloy prior to annealing. An analysis is made of structural transformations at different structural levels and the mechanism of high-temperature creep in the alloy. Institute of the Physics of Strength and Materials Science, Siberian Branch of the Russian Academy of Sciences. All-Republic Engineering-Technical Center, Siberian Branch of the Russian Academy of Sciences. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 3, pp. 83–89, March, 1998.     

Frequency domain measurements on Na2B4O7−V2O5 semiconducting glass

Summary Dielectric measurements on Na₂B₄O₇(99.5%)−V₂O₅(0.5%) glass system, in the frequency range 10⁻³ to 10⁴ Hz and temperature range 300 to 500 K, have been carried out. The normalized plots of complex capacitance have shown a single mechanism responsible for conduction for both volume and surface measurements with their close values of activation energies (0.67±0.03) eV and (0.64±0.03) eV, respectively. The low-frequency dispersion (LFD) behaviour has been observed to be perturbed by the presence of more than one competing process. The impedance plots have shown a parallel combination of a capacitor (C) and a resistor (R), with some contribution of a dispersive element due to charge accumulation in the vicinity of the electrodes. The values ofR andC were found to be of the same order of magnitude, for both surface and volume measurements. The observedR has shown a decrease with an increase in temperature due to an increase in mobility of Na⁺ ions, whereasC remains practicaly constant. The complex capacitance surface behaviour is dominated by volume, due to hygroscopy of this glass system.     

Capabilities and limits of ICP-MS for direct determination of element traces in saline solutions

An ICP-MS method for the determination of ultra-traces of 24 Elements (Li, Be, Mg, Al, Cr, Mn, Co, Zn, Cu, Ga, As, Se, Rb, Sr, Mo, Ag, Cd, Sn, Sb, Ba, Tl, Pb, Bi, U) at ng/L to μg/L levels in highly saline solutions (up to 30 g/L NaCl) was developed. Calculated to the salt content of the samples, limits of detection at the sub-μg/kg level were obtained. This allows the measurement of samples like sea water, or clinical samples like urine, serum and whole blood, with few or without sample preparation and a drastic improvement to the limits of detection. Compared to the determination in solutions of 1 g/L NaCl the limits of detection in the original sample were improved by one order of magnitude. Improvements in instrumental stability are achieved by the use of an additional gas, that is introduced to the aerosol stream and avoids salt deposition in the aerosol tube of the torch, the use of High Matrix Content (HMC) cones, that show no clogging even at NaCl-concentrations up to 50 g/L. With this setup the long term stability for measurements with changing matrix concentrations is < 10% without and < 5% with use of an internal standard for the individual samples. Cleaning up is necessary after 2 days of operation. The direct analysis of the Nearshore Seawater Reference Material NRC-CNRC CASS3 showed a good agreement with the certified and measured concentrations. Elements, that do not suffer from an isobaric overlap of matrix compounds can be determined clearly at ng/L levels. Measurement of different matrix concentrations showed, that acceptable results can be achieved with a single calibration for concentrations from 5 g/L NaCl to 30 g/L NaCl, though matrix matching shows the best results.     

A quasiconformal dynamic property of the disk

It is known that every conformai embedding of the disk into the extended complex plane possesses a r²-quasiconformal extension across eachr-level line (the r²-property of a domain). We show here that this is a characteristic property of the disk: any simply connected domain which is not a disk does not admit ther ²-property. Supported by the RiP-program of the Volkswagen-Stiftung in the Mathematisches Forschungsinstitut Oberwolfach.     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

A demonstration of the diffusion of sodium in a glass-gas discharge system

A demonstration is proposed of the nonstationary diffusion of sodium from a melt of its salt in two-electrode light indicators of a discharge in the cases of electric fields accelerating and damping the motion of ions.Mordovinian Pedagogical Institute. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 5, pp. 98–102, May, 1992.     

Towards an Operational Model for Prevention and Treatment of Asthma Attacks

Asthma is one of the major chronic diseases in many countries. At present there is no cure for asthma, but medical advances can help to reduce the chances of attacks of the condition. Efficient care for asthma involves complexity, uncertainty, variability and the use of scarce resources, and these are the same conditions that indicate a possible use for the modelling approach of operational research. This paper is concerned with a pilot model that was developed through joint work by medical professionals and operational researchers. The development of the model is explained and illustrative results indicate the potential value of the modelling approach for the care of asthma in the community.     

Solving a multi-objective simulation model using a hybrid response surface method and lexicographical goal programming approach—a case study on integrated circuit ink-marking machines

In an integrated circuit (IC) packaging plant, the ink-marking machine has a significantly higher throughput than the other processing machines. When periodic demand surges result in backlog orders or in lost customers, there is a need to increase system throughput. To resolve this problem, the purchase of a new machine often results in excess capacity in addition to added operation and acquisition costs. Therefore, the productivity improvement effort has priority over the machine purchase decision. This paper seeks to optimize both throughput and cycle time performance for IC ink-marking machines. While throughput increase is the primary objective, there is an acceptable cycle time limit for a feasible solution. It is a multi-objective problem. The proposed solution methodology constructed a simulation metamodel for the ink-marking operation by using a fractional factorial experimental design and regression analysis. It is then solved by a hybrid response surface method and lexicographical goal programming approach. Solution results illustrated a successful application.     

Gain saturation in quantum-well heterostructures

The effect of radiation gain saturation in quantum-well heretostructures was investigated in the system GaAs—AlGaAs with regard to the spectral line broadening and the type of radiation polarization. Belarusian State University, 4, F. Skorina Ave., Minsk, 220050, Belarus. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 6, pp. 797–800, November–December, 1997.