Optical Properties of Model Compounds of Polyaniline

The UV and visible spectra of six model compounds were studied. These compounds can be considered as models of polyaniline in the reduced, cation radical, partially oxidized and oxidized forms. After treatment of a mixture of equal molar quantities of the reduced form (DPPD) and the oxidized form (QDIM) with acid, the following reaction was observed: DPPD(I)+QDIM(III)+2H⁺=2DPPD⁺(II) After similar treatment of the partially oxidized form (V) with acid, the radical cation salt formed. The UV and visible spectra of polyaniline in the reduced form, oxidized form and conductive form are similar to the spectra of DPPD, QDIM and DPPD⁺ or radical cation salt of V respectively. We propose that the polyaniline synthesized by chemical oxidation of aniline consists of oxidized and reduced repeat units. Upon protonation a redox reaction (or electron rearrangement) occurs and forms delocalized radical cations (polarons) in the polymer chain which are highly conductive.     

铅影响儿童健康

对１９９３年６月至１９９６年６月因体弱多病，生长发育矮小等来诊的３５１例儿童作了血铅测查和临床全征分析，以期引起儿科临床医师重视。     

A general method for the preparation of 4- and 6-azaindoles

Nitropyridines reacted with an excess of vinyl Grignard reagent to produce 4- or 6-azaindoles. Improved yields were obtained when a halogen atom was present at the position alpha to the nitrogen atom in the pyridine ring.     

Influence of cysteine to cysteic acid oxidation on the collision-activated decomposition of protonated peptides: Evidence for intraionic interactions

Oxidation of cysteine residues to cysteic acids in C-terminal arginine-eontaining peptides (such as those derived by tryptic digestion of proteins) strongly promotes the formation of multiple members of the Y? series of fragment ions following low energy collision-activated decomposition (CAD) of the protonated peptides, Removal of the arginine residue abolishes the effect, which is also attenuated by conversion of the arginine to dimethylpyrim-idylornithine. The data indicate the importance of an intraionic interaction between the cysteic acid and arginine side-chains. Low energy CAD of peptides which include cysteic acid and histidine residues, also provides evidence for intraionic interactions. It is proposed that these findings are consistent with the general hypothesis that an increased heterogeneity (with respect to location of charge) of the protonated peptide precursor ion population is beneficial to the generation of a high yield of product ions via several charge-directed, low energy fragmentation pathways. Furthermore, these data emphasize the significance of gas-phase conformations of protonated peptides in determining fragmentation pathways.     

Influences of hydration force and elastic strain energy on the stability of solid film in a very thin solid-on-liquid structure

Since hydration forces become very strong at short range and are particularly important for determining the magnitude of the adhesion between two surfaces or interaction energy, the influences of the hydration force and elastic strain energy due to hydration-induced layering of liquid molecules close to a solid film surface on the stability of a solid film in a solid-on-liquid (SOL) nanostructure are studied in this paper. The liquid of this thin SOL structure is a kind of water solution. Since the surface forces play an important role in the structure, the total free energy change of SOL structures consists of the changes in the bulk elastic energy within the solid film, the surface energy at the solid-liquid interface and the solid-air interface, and highly nonlinear volumetric component associated with interfacial forces. The critical wavelength of one-dimensional undulation, the critical thickness of the solid film, and the critical thickness of the liquid layer are studied, and the stability regions of the solid film have been determined. Emphasis is placed on calculation of critical values, which are the basis of analyzing the stability of the very thin solid film.     

Thermal Studies on Rare Earth Metal Ion Chelates of 8-Hydroxyquinoline, 8-Hydroxyquinaldine and Their Derivatives

The thermal behaviors of chelates of oxine, 8-hydroxyquinaldine and their derivatives (DCQ, 5, 7-dichloro-8-hydroxyquinoline; DCQ', 5, 7-dichloro-8-hydroxyquinaldine) in an air atmosphere have been studied. The order of heat stability of chelates, decreased with decreasing basicity of the ligand, i.e. oxine<DCQ<DCQ'. The presence of water or proton-containing compounds in the chelates seemed to lower heat stabilities,     

LC Determination of 4-Bromoaniline in Green Algae Chlamydomonas reinhardtii After Continuous-Flow Microextraction

In this study, the determination of 4-Bromoaniline (4-BA) in green algae Chlamydomonas reinhardtii (C. reinhardtii) was investigated by applying continuous-flow microextraction (CFME) combined with high-performance liquid chromatography (HPLC). Continuous-flow microextraction was conducted in a homemade glass chamber, i.e. the sample solution flowed through a constant volume drop of solvent in the chamber at a constant flow rate. The effects of different factors on extraction efficiencies were also investigated and these factors included the kind of extraction solvent, solvent drop volume, sample flow rate, extraction time and addition amount of salt. Under the optimum extraction conditions (extraction solvent, carbon tetrachloride; solvent drop volume, 3.5 μL; sample flow rate, 1.0 mL min⁻¹; extraction time, 10 min; no addition of salt), the calibration plot was set up by plotting peak area against a series of 4-Bromoaniline concentrations (0.01–10 μg mL⁻¹) in aqueous solution. The correlation coefficient (r) was 0.9990. The limit of detection (LOD) was 0.6 ng mL⁻¹. The precision of this method was obtained by successive five time analyses of 100-ng mL⁻¹ standard solution of 4-Bromoaniline, and the relative standard deviation (RSD) was 3.5%. The concentration factor was calculated by the ratio of peak area of the analyte obtained after and before extraction and found to be 10.6. 4-Bromoaniline residues in Chlamydomonas. reinhardtii cells and tap water samples were satisfactorily analyzed according to the method described above.     

Sorption of 241Am by Aspergillus nigerspore and hyphae

Biosorption of ²⁴¹Am by a fungus A. niger, including the spore and hyphae, was investigated. The preliminary results showed that the adsorption of ²⁴¹Am by the microorganism was efficient. More than 96% of the total ²⁴¹Am could be removed from ²⁴¹Am solutions of 5.6-111 MBq/l (C _o) by spore and hyphaeof A. niger, with adsorbed ²⁴¹Am metal (Q) of 7.2-142.4 MBq/g biomass, and 5.2-106.5 MBq/g, respectively. The biosorption equilibrium was achieved within 1 hour and the optimum pH range was pH 1-3. No obvious effects on ²⁴¹Am adsorption by the fungus were observed at 10-45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above the ²⁴¹Am concentration. The ²⁴¹Am biosorption by the fungus obeys the Freundlich adsorption equation. There was no significant difference between the adsorption behavior of A. nigerspore and hyphae. This revised version was published online in July 2006 with corrections to the Cover Date.     

pH-sensitive polyelectrolyte complex gel microspheres composed of chitosan/sodium tripolyphosphate/dextran sulfate: swelling kinetics and drug delivery properties

Porous chitosan (CS) polyelectrolyte complex (PEC) hydrogel microspheres were prepared via either wet phase-inversion or ionotropic crosslinking with sodium tripolyphosphate (Na+ - TPP) and dextran sulfate (DS). The resulting microspheres were characterized using scanning electron microscopy (SEM) and elemental analysis (EA). The controlled release behavior of ibuprofen (IBU) from these microspheres was investigated. The PEC microspheres were about 700-950 microm in diameter with large pores and open porous structure. The CS/TPP/DS microspheres resisted hydrolysis in strong acid and biodegradation in enzymatic surroundings. The swelling kinetics for CS microspheres was close to Fickian diffusion, whereas those for CS/TPP and CS/TPP/DS were non-Fickian. Furthermore, the equilibrium water content (EWC) and water diffusion coefficient (D) increased with the pH of the media. The release profiles of IBU from CS/TPP/DS microspheres were slow in simulated gastric fluid (SGF, pH 1.4) over 3 h, but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 6.8) within 6 h after changing media. Overall the results demonstrated that CS/TPP/DS microspheres could successfully deliver a hydrophobic drug to the intestine without losing the drug in the stomach, and hence could be potential candidates as an orally administered drug delivery system.     

Effect of take-up speed on physical properties and permeation performance of cellulose acetate hollow fibers

Cellulose acetate (CA) ultrafiltration hollow fibers were spun via the dry-jet wet spinning technique. The effect of the take-up speed on the mechanical properties, morphology, thermal properties, pure water permeation, retention, and surface characterization of hollow fiber membranes were investigated. Both the inner and outer diameters of the hollow fiber decreased with the increase of take-up speed. Macrovoids were observed on the inner surface of the drawn hollow fibers. The d-space decreased with the increase of the take-up speed. The ultimate tensile stress (UTS) increased and the breaking elongation decreased with the increase of take-up speed. The permeation performance was measured. The hydraulic permeability increased and the retention decreased slightly with the increase of the take-up speed. The surface roughness increased with the increase of the take-up speed. The thermal analysis results showed that the endothermic peak shifts to the higher temperature region and coefficient of thermal expansion (CTE) decrease for a higher take-up speed.