单模光纤激光极限功率的数值研究

对光纤激光极限功率的探索和其受限因素的分析, 有利于为大功率光纤激光器的发展提供理论依据和实验指导. 本文考虑热效应、光效应、非线性效应和抽运亮度等因素对光纤激光极限功率的影响, 分析了掺镱和掺铥光纤的极限功率和受限因素. 在此基础上, 结合激光在光纤中单模传输的条件, 计算了单模掺镱和掺铥光纤激光的极限功率. 计算结果表明, 在现有技术条件下, 使用常规的976 nm和793 nm激光二极管抽运, 单模掺镱和掺铥光纤激光的极限功率分别为4.2 kW和7.8 kW, 其中单模掺铥光纤激光的功率水平还远低于它的极限功率的原因是受抽运亮度的限制. 最后分析指出减小纤芯的数值孔径和改进少模光束的光束质量是提升单模光纤激光极限功率的重要途径.     

Extended magnetic reconnection across the dayside magnetopause

The extent of where magnetic reconnection (MR), the dominant process responsible for energy and plasma transport into the magnetosphere, operates across Earth's dayside magnetopause has previously been only indirectly shown by observations. We report the first direct evidence of X-line structure resulting from the operation of MR at each of two widely separated locations along the tilted, subsolar line of maximum current on Earth's magnetopause, confirming the operation of MR at two or more sites across the extended region where MR is expected to occur. The evidence results from in-situ observations of the associated ion and electron plasma distributions, present within each magnetic X-line structure, taken by two spacecraft passing through the active MR regions simultaneously.     

Hybrid process for texturization of diamond wire sawn multicrystalline silicon solar cell

Acid texture is difficult for diamond wire sawn (DWS) multicrystalline silicon (mc‐Si) wafer owing to the inhomogeneous distribution of damage layer on the surface. In this article, metal‐assisted chemical etching (MACE) has been selected for introducing a porous seeding layer to induce acid texturing etching. SEM results show that the oval pit structures coverage get obvious improvement even on the smooth areas. Owing to the further improved light absorption ability by second MACE and nanostructure rebuilding (NSR) process, nanostructured DWS mc‐Si solar cell has exhibited a conversion efficiency of 17.96%, which is 0.45% higher than that of DWS wafer with simple acid texture process. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Coherent Beam Combination of Eight Watt-Level Polarization-Maintained Fiber Amplifiers

We demonstrate the coherent beam combination of eight Watt-level polarization-maintained fiber amplifiers. The phase control signal of each amplifier is generated by running a stochastic parallel gradient descent algorithm on a digital signal processor （DSP）. The experimental result shows that the whole system in close-loop performs well for long-time observation. Energy encircled in the target pinhole is 6.68 times more than that in open-loop. The combination efficiency is as high as 84.5%.     

Compact and portable terahertz source by mixing two frequencies generated simultaneously by a single solid-state laser

We have demonstrated a compact and portable terahertz (THz) source, based on difference-frequency generation in a GaSe crystal. The two input frequencies, required for achieving frequency mixing, are generated by a single Q-switched Nd:YLF laser incorporating two laser resonators. The average power of the THz output reaches 1 μW at 1.64 THz (182 μm) within a linewidth of 65 GHz. Such a THz source can be packaged into a compact and portable system.     

Enhanced flux-pinning in fluorine-free MOD YBCO films by chemical doping

YBCO films without and with dilute cobalt and zinc doping were prepared on (0 0 l) LaAlO₃ substrate by non-fluorine metal organic deposition method. Effects of dilute cobalt and zinc doping on biaxial texture, microstructure and flux-pinning properties of YBCO films were investigated. The surface density and smoothness of the doped YBCO films have been distinctly improved compared with that of the pure film. Dilute cobalt- and zinc-doped YBCO films exhibit significantly enhanced J_c values in the magnetic field. The best result is achieved in the cobalt-doped YBCO film. At 77 K, J_c values of cobalt-doped film are 1.7 and 5.4 times higher than that of pure film in 0.5 T and 1.5 T, respectively. These results strongly suggest that dilute cobalt and zinc doping is a promising way to increase the current carrying capability of YBCO films.     

用MRI无损检测胆囊中的胆汁成

为了探索用磁共振成象方法无损伤检测胆囊中的胆汁成分的可能性,我们用0.5T的磁共振成象仪,对38例禁食期胆囊疾病患者(12例急性无并发症胆囊炎及胆结石,1例化浓性胆囊炎,2例急性出血性胆囊炎,14例慢性胆囊炎及胆结石,5例胆囊息肉,4例障碍性黄疸进行了轴向腹部胆囊部位T1-加权自旋-回波成象.结果表明:禁食或胆囊疾病患者胆汁中胆固醇(p=0.014),脂肪酸(p=0.001),和铁(p<0.001)的浓度对T₁-加权成象(TR/TE=620/25ms)的肝-胆信号强度比有明显的负影响,同时发现总蛋白质,总胆红素及Na⁺,K⁺,Cl^-,Mg⁺⁺离子的浓度对肝-胆MRI信号强度比无显著影响,由此可见,T₁-加权MRI中的肝-胆信号强度比反映了胆囊中的胆汁成分,其中影响肝-胆信号强度比的最重要因素是胆囊中胆汁所含胆固醇、脂肪酸和铁的浓度.     

Dirac类氢原子的超对称方法研究

应用超对称方法研究了Ｄｉｒａｃ类氢原子问题，不需繁琐的数学处理，得到和严格解法完全一致的能量本征值谱及相应的本征函数。     

Propagation of coherently combined flattened laser beam array in turbulent atmosphere

The analytical expression for the propagation of a flattened laser beam array in a turbulent atmosphere is derived based on extended Huygens–Fresnel principle. The influence of beam order and turbulent atmosphere on beam quality is studied. It is revealed that the beam quality of a coherently combined laser beam array with higher order is better than its lower order counterpart when propagating in free-space, weak and medium turbulence (i.e. C_n²<10^?13 m^?2/3). The beam quality of higher order beam arrays degrades faster as the intensity of turbulence gets stronger. In the case of propagating in strong turbulence, the beam order has no influence on coherently combined beam quality.     

一种基于布朗粒子的混合搜索模型

基于网络上的布朗粒子运动基本原理,提出了一种单粒子和多粒子相结合的混合搜索模型.该模型将一次搜索过程分成单粒子搜索与多粒子搜索两个阶段,既克服了单粒子搜索效率低下的缺点,又降低了多粒子搜索的硬件代价.在各种复杂网络拓扑上实施该模型,并与混合导航模型进行比较.结果表明,混合搜索模型的平均搜索时间收敛更快,硬件代价更小.将度大优先的目标选择策略与混合搜索模型相结合,能进一步提高搜索效率.此外通过仿真发现,在无标度网络上混合搜索模型的效率远高于单粒子随机行走,与多粒子随机行走的效率相当,但硬件代价远小于多粒子行走.最后针对该模型给出了一种能有效降低负载的"吸收"策略.