Influence of the Size of Aromatic Chelate Ligands on the Structures of Cadmium(II) Tetracarboxylates Polymers: From 2D Layered Network to 3D Metal‐Organic Framework

To determine the influence of the size of the aromatic chelate ligands on the frameworks of metal tretracarboxylate polymers, two new coordination polymers [Cd(btc)_0.5 (2,2′‐bpy)] ( 1 ) and [Cd(btc)_0.5(phen)]·H₂O ( 2 ) (H₄btc = biphenyl‐3,3′,4,4′‐tetracarboxylic acid, 2,2′‐bpy = 2,2′‐bipyridine, phen = 1,10‐phenanthroline) have been synthesized under similar hydrothermal conditions. In complex 1 , the dimeric Cd₂ units are linked by bridging btc^4? ligand to form a 2D layered network, whereas complex 2 possesses a 3D metal‐organic framework consisting of the dimeric Cd₂ units. The differences of two metal‐organic frameworks demonstrate that the size of the rigid aromatic chelate ligands have an important effect on the structures of their complexes. Additionally, the two complexes show strong fluorescence in the solid state at room temperature.     

Multifold curdlan gel formation by dialysis into aqueous solutions of metal salts

We have found that the dialysis of curdlan dissolved in alkaline solution into aqueous solutions of metal salts yielded multifold gel structures. Aqueous sodium chloride and potassium chloride as well as pure water induced isotropic gels. Aqueous calcium salts induced liquid crystalline gel with refractive index gradient/amorphous gel alternative structure. Aqueous salts of trivalent aluminum and ferric cations induced a rigid liquid crystalline gel, which shrank above a threshold concentration of each salt. On the other hand, Liesegang ring-like pattern was observed with aqueous solutions of mixed salts of calcium chloride and magnesium chloride. The patterns have been classified to discuss the mechanism of forming the variety of structures.     

Tuning the arrangement of mono-crown ether-substituted phthalocyanines in Langmuir-Blodgett films by the length of alkyl chains and the cation in subphase

Amphiphilic phthalocyanines with one crown ether and three alkyl chain substitutions can form stable monolayers on a water surface. This monolayer can be transferred to a substrate by a vertical dipping method. The arrangement of phthalocyanine molecules in LB films was affected by the length of alkyl chains and the coordination of alkali ions in crown ether. Davydov splitting was observed in the absorption spectra of the LB films of phthalocyanine with the shortest alkyl chain substitutions, and this splitting was affected by the alkali ions in the subphase.     

Direct qualitative analysis of triacylglycerols by electrospray mass spectrometry using a linear ion trap

Triacylglycerols (TAGs) isolated from a biological sample provide a challenge for mass spectrometric analysis because of the complexity of naturally occurring TAGs, which may contain different fatty acyl substituents resulting in a large number of molecular species having the identical elemental composition. We have investigated the use of mass spectrometry to obtain unambiguous information as to the individual TAG molecular species present in a complex mixture of triacylglycerols using a linear ion trap mass spectrometer. Ammonium adducts of TAGs, [M+NH4]+, were generated by electrospray ionization, which permitted the molecular weight of each TAG molecular species to be determined. The mechanisms involved in the decomposition of the [M+NH4]+ and subsequent fragment ions were investigated using deuterium labeling, MS/MS, and MS3 experiments. Collision induced decomposition of [M+NH4]+ ions resulted in the neutral loss of NH3 and an acyl side-chain (as a carboxylic acid) to generate a diacyl product ion. MS/MS data were used to identify each acyl group present for a given [M+NH4]+ ion, and this information could be combined with molecular weight data to identify possible TAG molecular species present in a biological extract. Subsequent MS3 experiments on the resultant diacyl product ions, which gave rise to acylium (RCO+) and related ions, enabled unambiguous TAG molecular assignments. These strategies of MS, MS/MS, and MS3 experiments were applied to identify components within a complex mixture of neutral lipids extracted from RAW 264.7 cells.     

Continuation calculations of boron- (aluminum-, titanium-, and nickel-) doped La13 clusters

In this work, we have calculated boron-, aluminum-, titanium-, and nickel-doped La13 clusters by DMOL method based on the density-functional theory. Two doping modes are employed: surface and center doping. The boron, aluminum, and nickel atoms prefer to occupy the surface sites while the titanium atom prefers to occupy the center site. The doped La13 clusters with these four kinds of atoms have lower binding energy than pure La13 clusters. The icosahedral isomers are of lower binding energy than cubotahedral and decahedral isomers for La12B(-1), La12Al(-1), and La12Ni, while doping makes the cubotahedral La12Ti stable with a binding energy a little lower than icosahedral La12Ti. There are electronic shell effects in icosahedral La12B(-1) and La12Al(-1). The icosahedral La12B(-1) is promising to be formed during the doped process experimentally. Furthermore, we have also discussed the distorted structures of center doping by bond lengths, density of states, and charge transfers.     

How does huperzine A enter and leave the binding gorge of acetylcholinesterase? Steered molecular dynamics simulations

The entering and leaving processes of Huperzine A (HupA) binding with the long active-site gorge of Torpedo californica acetylcholinesterase (TcAChE) have been investigated by using steered molecular dynamics simulations. The analysis of the force required along the pathway shows that it is easier for HupA to bind to the active site of AChE than to disassociate from it, which for the first time interprets at the atomic level the previous experimental result that unbinding process of HupA is much slower than its binding process to AChE. The direct hydrogen bonds, water bridges, and hydrophobic interactions were analyzed during two steered molecular dynamics (SMD) simulations. Break of the direct hydrogen bond needs a great pulling force. The steric hindrance of bottleneck might be the most important factor to produce the maximal rupture force for HupA to leave the binding site but it has a little effect on the binding process of HupA with AChE. Residue Asp72 forms a lot of water bridges with HupA leaving and entering the AChE binding gorge, acting as a clamp to take out HupA from or put HupA into the active site. The flip of the peptide bond between Gly117 and Gly118 has been detected during both the conventional MD and SMD simulations. The simulation results indicate that this flip phenomenon could be an intrinsic property of AChE and the Gly117-Gly118 peptide bond in both HupA bound and unbound AChE structures tends to adopt the native enzyme structure. At last, in a vacuum the rupture force is increased up to 1500 pN while in water solution the greatest rupture force is about 800 pN, which means water molecules in the binding gorge act as lubricant to facilitate HupA entering or leaving the binding gorge.     

Dynamic Lie algebraic formulation of second‐order optical nonlinearity for substituted benzenes

A dynamic Lie algebraic (DLA) formulation is applied to the study of nonlinear optical properties of the substituted benzenes. We have described the generation of the dynamic Lie algebra for the model Hamiltonian used in the present study. In terms of these elements of the dynamic algebra we express the evolution operator as a function of the group parameters, which can be determined by means of solving a system of coupled nonlinear differential equations. Thus, in terms of the density matrix operator formalism in statistical mechanics we obtain the statistical averages of the electric polarization and then derive readily an expression for the hyperpolarizability of the paradisubstituted benzenes. Comparisons with experimental observations and other quantum calculations of the hyperpolarizabilities for the paradisubstituted benzenes are made qualitatively and quantitatively. These results imply that the DLA method appears useful in describing the nonlinear optical phenomena in the substituted benzene molecules. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 335–343, 2003     

On-line preconcentration and determination of mercury in biological samples by flow injection vapour generation inductively coupled plasma atomic emission spectrometry

An FI-ICP-AES method for the determination of trace levels of mercury in biological samples has been described, which is based on the extraction of the mercury complex with 1,5-bis (di-2-pyridyl)methylene thiocarbonohydrazide (DPTH) on-line into isobuthyl-methyl ketone (IBMK). The organic phase (containing the complex) has been mixed on-line with SnCl₂ in N,N-dimethylformamide. Thus, mercury vapour can be generated directly from the organic phase and separated in a gas-liquid separation device. The detection limit for mercury is 4 ng/ml and the calibration curve is linear at least from 10 to 2500 ng/ml. The relative standard deviation for 10 replicate measurements is ±1% for 100 ng/ml of Hg(II). Results from the analysis of some certified biological reference materials are given.     

Microstructure and association property of hydrophobically modified polyacrylamide of a new family

A new family of hydrophobically modified polyacrylamides was synthesized via copolymerization of acrylamide (AM) and anionic surface-active monomer of acrylamide-type, sodium 2-acrylamido-tetradecane sulfonate (NaAMC₁₄S), in aqueous solution. In the copolymerization, by varying various factors, such as the feed ratio of NaAMC₁₄S to AM and the amount of added electrolyte NaCl and initiator, we prepared copolymers NaAMC₁₄S/AM with different block structures. The relationship between structures and hydrophobic association properties of copolymer chains was studied by using fluorescence probe and viscosimetry. Effects of the content and length of the hydrophobic blocks and the total molecular weight on hydrophobic association of the copolymers in pure water and in brine solution were examined, respectively. The results show that in pure water, hydrophobic association of the copolymers was enhanced as the content and length of the hydrophobic block increase. On the other hands, for a given content and length of the hydrophobic block, the hydrophobic association of the copolymers was enhanced as the total molecular weight increases. For all the copolymers studied, the apparent viscosity of their solutions in pure water has a limited value, but the apparent viscosities of the copolymer brine solutions are much higher than that of their corresponding water solutions, and show strong positive salinity sensitivity. Similarly, the hydrophobic association of the copolymer in brine solutions was enhanced as the content and length of the hydrophobic block increase.     

Behavior of rifampicin in association with<Emphasis Type="Italic"> β</Emphasis>-cyclodextrin in aqueous media: a spectroscopic and conductometric study

The behavior of rifampicin (D) with -cyclodextrin (-CyD) in aqueous media (W) has been examined by means of UV-vis spectroscopy and conductivity measurements over the temperature range 15–30 °C. The UV-vis study has been used to characterize the systems. The estimated molar absorption coefficient for D/CyD/W system was 10757±280 M^–1 cm^–1 in comparison to the value of 6133±99 M^–1 cm^–1 for D/W system. The conductivity was measured (i) as a function of [D] for binary D/W systems, (ii) as a function of [CyD], keeping the concentration of drug constant, for D/CyD/W system, and (iii) as a function of [D] in the presence of a constant cyclodextrin concentration. Two transition points were observed for D/CyD/W system at constant [CyD], which were assigned as cac-1 and cac-2. The stoichiometry of the association was estimated from the conductivity data. This was obtained from [drug] value at which the change in slope of occurs. The standard free energy change, of aggregation was also calculated from the critical concentration data. An attempt has also been made to estimate the stoichiometry of -cyclodextrin:rifampicin association.