X-ray investigation of the role of the mixed emulsifier in the structure formation in o/w creams

The aim of this research work was to clarify the role of the mixed emulsifier in the structure formation and water binding mode in the case of o/w creams prepared with different surfactants. The swelling behavior of mixed emulsifiers was examined by means of direct investigation methods such as transmission electron microscopy (TEM) and X-ray diffraction. The detailed structure image of the creams was created with the help of the latter. The influence of the structure of the hydrophilic gel phase, and the structural changes during storage were studied with rheological methods. On the basis of the results, it can be stated that the investigated creams had different structures from those mentioned in the literature: surfactant did not create a mixed bilayer with the structure to furnish fatty amphiphile; instead, micelles were formed. These results correlated well with the results of the rheological tests.     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

FT-IR and Raman spectroscopic study of hydrated rubidium (cesium) borates and alkali double borates

FT-IR and Raman spectra of five hydrated alkali borates and five hydrated alkali double borates have been recorded at room temperature in the range 400 to 4000 cm⁻¹, and analyzed. Fundamental vibrational modes have been identified and assignments tentatively made in comparison with the work of Janda and Heller, and Li Jun. The text was submitted by the authors in English.     

Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

萃取动力学光度法测定活化剂铝——铝(Ⅲ)-过氧化氢-铜(Ⅱ)-邻氨基酚/氯仿体系

研究了在pH 5.5的弱酸性介质中, 利用Al(Ⅲ)对Cu(Ⅱ)催化H2O2氧化邻氨基酚显色的指示反应的活化作用.用萃取平衡控制反应时间、水相中邻氨基酚的浓度和反应进行的程度.通过在424 nm下测量有机相的吸光度,建立了萃取催化光度法测定活化剂铝的新方法.方法的线性范围为0.004～0.25 mg/L,检出限为1.6×10 -6 g/L.用于水样和茶叶中铝含量的测定,结果满意.     

间位取代四苯基卟啉铁(Ⅲ)的紫外可见光谱及其与二乙胺轴配反应的研究

研究了二氯甲烷溶液中二乙胺(L)与氯合(meso-四-间甲基苯基卟啉)铁(Ⅲ)的轴向配位反应.用光谱法测得不同温度下反应的平衡常数,求得(m-CH₃)TPPFe(Ⅲ)Cl+L=(m-CH₃)TPPFe(Ⅲ)Cl·L反应的标准摩尔焓和摩尔熵.同时,对反应的动力学与反应机理进行了研究.也研究了反应物和产物的紫外可见光谱,并讨论了取代基及轴向配体对铁卟啉紫外可见光谱的影响。     

水溶性聚合物和两亲聚合物:12.环氧乙烷-环氧丙烷无规共聚醚结构与性能的关系

来用连续加料法,以二元醇-KOH为引发剂合成一组不同组成的环氧乙烷-环氧丙烷无规共聚醚,并用核磁共振、红外光谱、示差扫描量热计和热失重等方法对其本体聚合物,用浊点和表面张力测定的方法对其水溶液,进行系统的表征。     

Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

This paper studied the effect of pH and the viscosity of feed solution on the mass transfer in two different specifications of hydrophobic hollow fiber membrane contactors. Experimental results showed that the pH of the feed had a significant effect on the rate of mass transfer, the flux and the removal efficiency of easily ionized volatile compounds (VCs), such as ammonia. In unbuffered feed solutions, both the resistance of membrane and the resistance of feed side were affected by the pH of feed and both of them had contributions to the overall mass transfer. A model, , was proposed to predict the effect of pH and gave good agreement with the experimental data for the two contactors. The relationship between viscosities and the mass transfer coefficient could be described by . Based on our experiments, the change of the viscosities in the concentration range of ammonia from 50 to 10,000 mg l⁻¹ caused about 3–4% variation of the mass transfer coefficients. Moreover, it may be more suitable to use the equilibrium concentrations of volatile species instead of the total concentrations of VCs to estimate mass transfer coefficients, removal efficiency and flux. Experimental results also revealed that the choice of the pH of feed might be one of the most crucial factors for removing easily ionized VCs, such as ammonia, from water and wastewater.     

Fabrication of ultrathin films with large third-order nonlinear optical properties.

An ultrathin composite film containing anionic Ag-His complexes (His: L-Histidine) and oppositely charged BH-PPV was fabricated by means of the electrostatic layer-by-layer self-assembly technique. UV/Vis spectra showed a continuous deposition process of Ag-His complexes and BH-PPV. The film structure was characterized by using small-angle X-ray diffraction, AFM, and SEM. The nonlinear optical properties of the ultrathin film were studied by using the Z-scan technique with a laser duration of 8 ns at a wavelength of 532 nm. The film sample exhibited a strong nonlinear saturated absorption, with an alpha2 value of -3.9 x 10(-5) mW(-1) and a self-defocusing effect with an n2 value of -4.78 x 10 (-12) m2W(-1).     

Clathration-induced asymmetric transformation of cefadroxil

[structure: see text] The cephalosporin antibiotic Cefadroxil can be epimerized at the alpha-carbon of its amino acid side chain using pyridoxal as the mediator. By clathration with 2,7-dihydroxynaphthalene, the desired diastereomer can be selectively withdrawn from the equilibrating mixture of epimers. In this way, an asymmetric transformation of Cefadroxil can be accomplished. This opens the possibility of the production of Cefadroxil starting from racemic p-hydroxyphenylglycine, in contrast to the current industrial synthesis that employs the D-amino acid in enantiopure form.