Synthesis,Crystal Structure,and Electrochemical Properties of a Simple Magnesium Electrolyte for Magnesium/Sulfur Batteries

Most simple magnesium salts tend to passivate the Mg metal surface too quickly to function as electrolytes for Mg batteries. In the present work, an electroactive salt [Mg(THF)₆][AlCl₄]₂ was synthesized and structurally characterized. The Mg electrolyte based on this simple mononuclear salt showed a high Mg cycling efficiency, good anodic stability (2.5 V vs. Mg), and high ionic conductivity (8.5 mS cm^?1). Magnesium/sulfur cells employing the as‐prepared electrolyte exhibited good cycling performance over 20 cycles in the range of 0.3–2.6 V, thus indicating an electrochemically reversible conversion of S to MgS without severe passivation of the Mg metal electrode surface.     

Enzyme‐ and Ruthenium‐Catalyzed Enantioselective Transformation of α‐Allenic Alcohols into 2,3‐Dihydrofurans

An efficient one‐pot method for the enzyme‐ and ruthenium‐catalyzed enantioselective transformation of α‐allenic alcohols into 2,3‐dihydrofurans has been developed. The method involves an enzymatic kinetic resolution and a subsequent ruthenium‐catalyzed cycloisomerization, which provides 2,3‐dihydrofurans with excellent enantioselectivity (up to >99 % ee). A ruthenium carbene species was proposed as a key intermediate in the cycloisomerization.     

A Copper‐Catalyzed Decarboxylative Amination/Hydroamination Sequence: Switchable Synthesis of Functionalized Indoles

A copper‐catalyzed decarboxylative amination/hydroamination sequence of propargylic carbamates with various nucleophiles is described for the first time. It features an earth‐abundant metal catalyst, mild reaction conditions, and high efficiency. Further treatments of the resultant key intermediates using an acid or a base in one pot enable the controllable and divergent synthesis of two types of functionalized indoles. Moreover, experiments to demonstrate the synthetic potential of this methodology are performed.     

LC–MS/MS determination and interaction of the main components from the traditional Chinese drug pair Danshen–Sanqi based on rat intestinal absorption

The Chinese drug pair Danshen (Salvia miltiorrhiza)–Sanqi (Panax ginseng) has been widely used for centuries treating various cardiovascular disorders, among which salvianlic acid B (SAB), ginsenoside Rg₁ (GRg₁), ginsenoside Rb₁ (GRb₁) and notoginsenoside R₁ (NGR₁) were identified as the major components. The present study focused on the interaction between these components based on investigating their intestinal absorption using the Ussing chamber technique. The concentrations of SAB, GRg₁, GRb1 and NGR₁ in the intestinal perfusate were determined by LC–MS/MS method, followed by Q (accumulative quantity) and P_app (apparent permeability). The results showed that all these four main components displayed very low permeabilities, which implied their poor absorption in the rat intestine. The intestinal absorption level of SAB displayed regioselectivity: duodenum < jejunum < ileum. However, there was no significant difference in the absorption of GRg₁ and GRb₁ in the different segments. The Q and P_app values of the four main components were obviously increased in jejunum when co‐administrating Danshen extract with Sanqi extract. In conclusion, compatibility of Danshen and Sanqi could remarkably improve the intestinal absorption level of the main components in the pair. To some extent, this might explain the nature of the compatibility mechanisms of composite formulae in TCMs.     

Chemical‐Bonding‐Directed Hierarchical Assembly of Nanoribbon‐Shaped Nanocomposites of Gold Nanorods and Poly(3‐hexylthiophene)

Nanoribbon‐shaped nanocomposites composed of conjugated polymer poly(3‐hexylthiophene) (P3HT) nanoribbons and plasmonic gold nanorods (AuNRs) were crafted by a co‐assembly of thiol‐terminated P3HT (P3HT‐SH) nanofibers with dodecanethiol‐coated AuNRs (AuNRs‐DDT). First, P3HT‐SH nanofibers were formed due to interchain π–π stacking. Upon the addition of AuNRs‐DDT, P3HT‐SH nanofibers were transformed into nanoribbons decorated with the aligned AuNRs on the surface (i.e., nanoribbon‐like P3HT/AuNRs nanocomposites). Depending on the surface coverage of the P3HT nanoribbons by AuNRs, these hierarchically assembled nanocomposites exhibited broadened and red‐shifted absorption bands of AuNRs in nIR region due to the plasmon coupling of adjacent aligned AuNRs and displayed quenched photoluminescence of P3HT. Such conjugated polymer/plasmonic nanorod nanocomposites may find applications in fields, such as building blocks for complex superstructures, optical biosensors, and optoelectronic devices.     

Synthesis and investigation on the interaction with calf thymus deoxyribonucleic acid of a novel fluorescent probe 7-oxobenzo[b][1,10]phenanthroline-12(7H)-sulfonic acid

In this paper, the synthetic route of a potential antitumor reagent, benzo[b][1,10] phenanthrolin-7(12H)-one (BPO), was improved. A sulfonic group was introduced to BPO to form a new compound, 7-oxobenzo[b][1,10]phenan-throline-12(7H)-sulfonic acid (OPSA), in order to enhance its water-solubility. The molecular structure of OPSA has been confirmed by IR, UV, MS, ¹H NMR and elements analysis. It was proved in our experiments that DNA could quench the fluorescence of OPSA and the maximum quenched intensity appeared at 408 nm (λ_ex = 284 nm). The quenched fluorescence intensity was proportional to the concentration of DNA. Based on this phenomenon, OPSA had been used as the fluorescent probe for detection of calf thymus DNA (ct-DNA) and the corresponding linear response range was from 1.0 to 150.0 μg mL⁻¹ and the limit of detection (LOD) was 3.8 ng mL⁻¹. Its interaction with ct-DNA was investigated by fluorescence, absorption and viscosity measurements. When binding to ct-DNA, OPSA showed obvious fluorescence quenching and the quenched intensity was stable with the presence and absence of NaCl. The absorption spectra of OPSA had no evidence of increasing or decreasing when ct-DNA was added. The viscosity of OPSA and ct-DNA mixture showed no obvious change comparing with the viscosity of ct-DNA along. The results suggested that the interaction between OPSA and ct-DNA was groove binding in nature. Scatchard plots constructed from fluorescence titration data gave a binding constant of 8.9 × 10⁵ L mol⁻¹ and a binding site size of 0.35 base pairs per bound drug molecule.     

Intrinsic Crosslinking and Gel-Breaking Rheokinetics of CMHEC/CTAB Systems

The intrinsic rheokinetics of carboxymethyl hydroxyethyl cellulose and cetyltrimethyl ammonium bromide (CMHEC/CTAB) synergistic fracturing fluid in static crosslinking and gel-breaking processes were studied in this work. Microrheological properties including solid–liquid balance (SLB) and elasticity index (EI) during the static crosslinking and gel-breaking processes were obtained. The effects of temperature on the crosslinking process, concentration of gel-breaker (ammonium persulfate), and temperature on the gel-breaking process were investigated. The novel intrinsic crosslinking and gel-breaking rheokinetics equations were established, respectively. The results show that the crosslinking process can be divided into two stages, and the intrinsic crosslinking rheokinetics equation can well describe EI curves during the static crosslinking process at different temperatures. The EI curves during the gel-breaking process can be well described by the intrinsic gel-breaking rheokinetics equation. The parameters for these two rheokinetics equations are well-defined and reasonable.     

Effect of chain architecture on the phase transition of star and cyclic poly(N‐isopropylacrylamide) in water

The heat‐induced phase transition of aqueous solutions of Poly(N‐isopropylacrylamide) (PNIPAM) in water is examined for a four‐arm PNIPAM star (s‐PNIPAM), a cyclic PNIPAM (c‐PNIPAM), and their linear counterparts (l‐PNIPAM) in the case of polymers (1.0 g L^?1) of 12,700 g mol^?1 < M_n < 14,700 g mol^?1. Investigations by turbidity, high‐sensitivity differential scanning calorimetry (HS‐DSC), and light scattering (LS) indicate that the polymer architecture has a strong effect on the cloud point (T_c: decrease for s‐PNIPAM; increase for c‐PNIPAM), the phase transition enthalpy change (ΔH decrease for s‐PNIPAM and c‐PNIPAM), and the hydrodynamic radius of the aggregates formed above T_c (R_H: c‐PNIPAM < s‐PNIPAM < l‐PNIPAM). The properties of s‐PNIPAM are compared with those of previously reported PNIPAM star polymers (3 to 52 arms). The overall observations are described in terms of the arm molecular weight and the local chain density in the vicinity of the core of the star, by analogy with the model developed for PNIPAM brushes on nanoparticles or planar surfaces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2059–2068.