Ru(II)染料与聚3-甲基噻吩复合敏化纳米结构TiO2电极的光电化学研究

利用光电流作用谱、循环伏安等光电化学方法研究了染料RuL₂(SCN)₂: 2TBA (L＝2,2'-bipydine-4,4'-dicarboxylic acid)与聚3-甲基噻吩(P3MT)复合敏化电极的光电化学性质. RuL₂(SCN)₂: 2TBA/P3MT复合敏化TiO₂纳米晶多孔膜电极比染料RuL₂(SCN)₂: 2TBA敏化TiO₂纳米结构电极的光电转换效率大幅度提高. 复合敏化电极中存在p-n异质结有效地抑制了电子的反向复合, 减少了电子的损失.     

Evaluation of analyte stability and method ruggedness in the determination of streptomycin residues in honey by liquid chromatography with post-column derivatization

This study demonstrated that streptomycin in honey is quite stable, and the results showed no obvious differences for 3 samples containing incurred analyte during continuous testing for 4 months. Fifteen laboratories evaluated method performance at 4 fortification levels ranging from 0.010 to 0.100 mg/kg; the recoveries ranged from 73.7 to 78.5%, the reproducibility relative standard deviations ranged from 5.76 to 15.85%, and the repeatability relative standard deviations ranged from 1.64 to 3.80%. In 1999-2002, the method was used to determine streptomycin residues in 5106 lots of honey samples from >20 provinces all over China. All of the honey samples were found to be in conformity with the requirements of customs clearance for exports to Europe, the United States, and Japan. The continuous 4-year quality analysis also found that C18 solid-phase extraction cartridges should be standardized to ensure that the analytical results are accurate when different lots of cartridges are used.     

聚3-甲基噻吩修饰量子点硫化铅连接TiO2纳米结构膜的光电化学研究

采用原位化学法在纳米结构TiO2电极上制备了量子点PbS(Q-PbS), 并用电化学方法在TiO2/Q-PbS表面聚合3-甲基噻吩[poly(3-Methylthiophene), PMeT]. 研究结果表明, PMeT和Q-PbS单独修饰纳米结构TiO2电极和PMeT修饰Q-PbS连接纳米结构TiO2电极的光电流产生的起始波长都向长波方向移动; 在可见光区光电转换效率均比纳米结构TiO2的光电转换效率提高显著; PMeT与Q-PbS修饰的纳米结构TiO2之间存在p-n异质结. 在一定条件下p-n异质结的存在有利于光生电子/空穴的分离, 提高了光电转换效率.     

TiO2纳米线的制备及其光电性能研究

利用在钛箔表面沉积一层TiO₂纳米粒子作为晶种，与NaOH反应，制备了一维物质TiO₂纳米线。并用XRD、SEM、TEM、HRTEM及EDS等分析手段对TiO₂纳米线的成分、形貌、结构进行表征。结果表明，采用该方法制得的TiO₂纳米线直径在20～50 nm左右、长度可达几微米。反应温度能显著影响所得纳米线的形貌。研究了TiO₂纳米线的光电化学性能。随反应温度的升高TiO₂纳米线光电转换效率增大。     

3-己基噻吩和2-噻吩甲酸共聚物修饰纳米结构TiO2薄膜电极的光电性能研究

用光电流作用谱、光电流-电势图等光电化学方法研究了铟锡导电玻璃(ITO)/3-己基噻吩和2-噻吩甲酸共聚物(CTCHT)膜电极以及ITO/TiO₂/3-己基噻吩和2-噻吩甲酸共聚物(CTCHT)复合膜电极的光电转换性质. 结果表明, CTCHT膜为p-型半导体, 禁带宽度为2.44 eV, 价带位置为－5.73 eV. 研究表明在ITO/TiO₂/CTCHT复合膜电极中存在p-n异质结, p-n异质结的存在能够使光生电子和空穴有效的分离, 有效地降低了电荷的反向复合几率, 提高了光电转换效率, CTCHT膜修饰ITO/TiO₂电极可使光电流增强, 使宽禁带半导体电极的光电转换效率得到改善.     

纳米结构TiO2/聚3-甲基噻吩多孔膜电极光电化学研究

用光电流作用谱、光电流-电势图、紫外-可见吸收光谱等光电化学方法研究了导电玻璃(ITO)/TiO₂/聚3-甲基噻吩(PMT)电极的光电转换性质. 结果表明, PMT膜为p型半导体, 其禁带宽度为1.93 eV. 并通过循环伏安和光电化学方法确定了其导带位置为－3.44 eV, 价带为－5.37 eV, 在纳米TiO₂与PMT之间存在p-n异质结, ITO/TiO₂/PMT电极不仅提高了光电流, 而且使产生光电流的起始波长红移至＞600 nm, 从而提高了宽禁带半导体的光电转换效率.     

AgI/h-MoO_3异质结的构筑及其模拟燃油光催化氧化脱硫活性

利用沉积法获得了异质结AgI/h-MoO_3光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、光电子能谱(EDS)、X射线光电子能谱(XPS)、紫外-可见漫反射吸收光谱(UV-Vis-DRS)、光致发光(PL)、电化学阻抗(EIS)等方法对其物相组成、形貌、光吸收特性、光电化学性能等进行了表征。以噻吩的正辛烷溶液模拟催化裂化(FCC)汽油为探针考察了AgI/h-MoO_3光催化氧化脱硫活性,结果表明,AgI/h-MoO_3-18异质结在催化剂浓度为1.5 g·L~(-1),可见光照射2 h后,光催化氧化脱硫活性达98%。利用XRD、XPS、UV-Vis-DRS揭示了AgI/h-MoO_3光照后生成少量的金属Ag,使其结构转变为Z型AgI/Ag/h-MoO_3,有利于光生电子(e~-)转移。利用活性物种捕获实验、循环实验研究了AgI/h-MoO_3光催化氧化脱硫机理及其稳定性,实验结果表明:AgI/h-MoO_3不仅具有较高的光催化氧化脱硫活性,而且还有良好的稳定性。     

高Br纳米晶Fe73.5Cu1Nb3Si13.5B9合金的损耗行为

在f=10—20000Hz和B_m=0.1—1.0T范围内,测量了高B_r纳米晶Fe_73.5Cu₁Nb₃Si_13.5B₉合金的损耗.把总损耗分离为磁滞损耗、经典涡流损耗和过剩损耗.测量结果表明,每周损耗随频率的变化表现出明显的非线性行为.用Bertotti的损耗统计理论描述了这种非线性行为.大致在两个频率范围内,有两种不同的描述方式. 关键词：     

3d过渡金属掺杂TiO2纳米晶膜电极的光电化学研究

应用原子力显微镜和X射线粉末法对3d过渡金属离子Cr(Ⅲ),Fe(Ⅲ),Mn(Ⅱ),Co(Ⅱ),Ni(Ⅱ),Cu(Ⅱ)和Zn(Ⅱ)掺杂TiO₂纳米晶粒(简写为m^3d-TiO₂)作了表征,并用光电化学方法研究了m^3d-TiO₂纳米结构多孔膜电极.实验结果表明,m^3d-TiO₂纳米粒子的颗粒较均匀,粒径约为15nm,其晶型为锐钛矿和板钛矿的混晶.在所研究的m^3d-TiO₂中,只有Zn²⁺-TiO₂电极的光电流大于未掺杂的TiO₂纳米结构多孔膜电极.3d金属离子的掺杂引起各电极的光电流信号在一定波长范围内出现p-n转型现象.     

High-throughput GC/MS and HPLC/MS/MS techniques for the multiclass, multiresidue determination of 653 pesticides and chemical pollutants in tea

An efficient and sensitive method has been established for simultaneous determination of 653 pesticides in teas by GC/MS and HPLC/MS/MS. The method involved extraction with acetonitrile followed by cleanup using Cleanert-TPT SPE and subsequent identification and quantitation of 490 pesticides by GC/MS and 448 pesticides by HPLC/MS/ MS. The LODs for pesticides determined by GC/MS were between 1.0 and 500 microg/kg, and those determined by HPLC/MS/MS were between 0.03 and 4820 microg/kg. At the low fortification levels of 0.01-100 microg/kg, the average recoveries of 94% of the pesticides determined by GC/MS were between 60 and 120%, 77% of which had an RSD below 20%. For 91% of pesticides determined by HPLC/MS/MS, the average recoveries were between 60 and 120%, 76% of which had an RSD below 20%. The paper also reports a novel SPE column, Cleanert TPT, which comprised graphitized carbon black (PestiCarb), polyamine silica, and amide polystyrene for purifying the tea samples. The results indicated good repeatiblity and reproducibility.