1H and 13C NMR assignments for two new angular furanocoumarin glycosides from Peucedanum praeruptorum

Two novel angular-type furanocoumarin glycosides, peucedanoside A (1) and peucedanoside B (2), along with a known compound apterin (3), were isolated from the roots of Peucedanum praeruptorum Dunn. Their chemical structures were determined by MS, NMR spectroscopy and chemical analysis. Complete assignments of the 1H and 13C NMR spectroscopic data were achieved by 1D and 2D NMR experiments including DEPT, HSQC, HMBC and ROESY.     

Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate

The current paper reports the synthesis of a highly hydrophilic, antifouling dendronized poly(3,4,5-tris(2-(2-(2-hydroxylethoxy)ethoxy)ethoxy)benzyl methacrylate) (PolyPEG) brush using surface initiated atom transfer radical polymerization (SI-ATRP) on PDMS substrates. The PDMS substrates were first oxidized in H₂SO₄/H₂O₂ solution to transform the Si-CH₃ groups on their surfaces into Si-OH groups. Subsequently, a surface initiator for ATRP was immobilized onto the PDMS surface, and PolyPEG was finally grafted onto the PDMS surface via copper-mediated ATRP. Various characterization techniques, including contact angle measurements, attenuated total reflection infrared spectroscopy, and X-ray photoelectron spectroscopy, were used to ascertain the successful grafting of the PolyPEG brush onto the PDMS surface. Furthermore, the wettability and stability of the PDMS-PolyPEG surface were examined by contact angle measurements. Anti-adhesion properties were investigated via protein adsorption, as well as bacterial and cell adhesion studies. The results suggest that the PDMS-PolyPEG surface exhibited durable wettability and stability, as well as significantly anti-adhesion properties, compared with native PDMS surfaces. Additionally, our results present possible uses for the PDMS-PolyPEG surface as adhesion barriers and anti-fouling or functional surfaces in biomedical applications.     

基于Schiff base配体及吡啶环的铜(Ⅱ)、镍(Ⅱ)配合物构筑、表征与热稳定性

用缓慢挥发法和水热法分别合成了镍配合物NiLPy（L=5-溴-2-羟基苯基苯基酮-4-甲氧基苯甲酰腙,Py=吡啶）（1）及铜配合物Cu（babh）₂（Py）（Hbabh=苯亚甲基苯乙酮苯甲酰腙,Py=吡啶）（2）,并用元素分析、红外、热重及X-射线单晶衍射对其进行了表征。晶体结构表明：1属三斜晶系,P1空间群;2属单斜晶系,Pc空间群。化合物1和2分别通过分子间弱的C-H…π与C-H…N作用堆积形成二维片状超分子层。热重分析表明配合物1和2分别处于225和170℃以下温度时很稳定。     

气相色谱法测定树脂工艺品中的半挥发性有机物残留

建立了树脂工艺品中半挥发性有机物(SVOCs)的超声萃取–气相色谱检测方法。对超声萃取条件进行了研究,优化了气相色谱参数。结果表明,样品用三氯甲烷在60℃下超声萃取40 min,选择HP–5色谱柱时,气相色谱(FID)测定半挥发物总量时可获得良好的灵敏度和准确的定量结果。方法的相对标准偏差小于5%(n=6),检测限为2 mg/kg。4个含量水平样品的6个实验室3次平行测定结果表明,实验室内测定结果的相对标准偏差为1.61%~2.94%,实验室间测定结果的相对标准偏差为5.96%~8.35%。     

在硫酸铵存在下硫氰酸铵-孔雀绿-水液-固体系浮选分离汞（Ⅱ）

研究了在硫酸铵存在下硫氰酸铵－孔雀绿－水液－固体系浮选分离汞（Ⅱ）的行为及其与常见离子分离的条件。实验表明，在一定条件下，控制酸度条件，可实现Hg(Ⅱ）与常见离子Ni（Ⅱ），Mn（Ⅱ），Fe（Ⅱ），Bi（Ⅲ），Co（Ⅱ），Al（Ⅲ），Cr（Ⅲ），Cd（Ⅱ）分离，对合成水样及工业废水进行定量浮选分离测定，结果与双硫腙法相符。     

温度对乙醇电催化氧化的影响

升高温度可以提高反应速率和增加物质的输运,因此通过不同温度下反应机理的研究可以深入理解电催化过程,对催化剂的设计具有指导意义。本工作初步建立了变温原位红外测定方法。采用温控电极,用电势测温法进行温度的校准,实验得出控温仪器加热温度Th与电极表面温度TS的关系为T_S=0.57T_h+7.71 (30°C T_h≤50°C);T_S=0.62T_h+5.12 (50°C T_h≤80°C),误差分析最大温差为1°C。利用该方法我们研究了商业Pt/C催化剂在不同温度下乙醇的电氧化过程。从循环伏安图可以明显看到随着温度的升高整体氧化电流增大,起始电位、峰电位均负移,说明热活化使得氧化反应更容易进行;第一个峰电流与第二个峰电流的比值用于定性评估CO_2的选择性,对比25°C,商业Pt/C催化剂在65°C下第一峰提高30%,说明高温有利于C―C键的断裂。对比25°C的原位红外谱图,我们发现35°C及50°C下商业Pt/C催化剂上CO_2产物的起始电位负移200 m V,说明高温下,Pt/C催化剂能在更低的电位提供含氧物种;而CH_3CHO、CH_3COOH起始电位不随温度变化。用CO_2与CH_3COOH的积分面积比来评估CO_2选择性,发现高温低电位其选择性最高,说明高温低电位有利于乙醇完全氧化生成CO_2,而高温高电位下表面吸附含氧物种占据了活性位,阻碍C―C键断裂。     

高效毛细管电泳法手性分离D-氨基酸取代胸腺五肽类似物的研究

采用高效毛细管电泳法分离两对D-氨基酸取代的胸腺五肽类似物。对影响分离的缓冲液pH值、电泳温度、电泳电压等进行了系统的研究。用含20mmol/L2,6-二甲基-β-环糊精(DM-β-CD),40mmol/L磷酸盐缓冲液(Ⅰ:pH6.03;Ⅱ:pH5.05)作运行缓冲液,柱温15℃,电压20kV,使样品获得基线分离,取得了满意的分离结果。结果显示,两组样品的D-氨基酸取代物均比L-氨基酸取代物出峰早,提示D-氨基酸取代物的电泳移动速度较快,与DM-β-CD的结合稳定性较L-氨基酸取代物弱。     

Visible photoluminescence of nanometer-sized SiGe/Si heterostructure fabricated by ion implantation

An innovative fabrication technique for the nanometer-sized SiGe/Si heterostructure was developed in this study. Ge was induced in Si substrate by two-step ion implantation. The spherical SiGe nanoclusters are self-assembled in the Si substrate by subsequent rapid thermal annealing at 1,100 °C. The diameter of the spherical SiGe nanoclusters is 5–7 nm. Visible photoluminescence from this nanometer-sized SiGe/Si heterostructure at room temperature was investigated. We found three peak energies of visible luminescence spectra at 1.97, 2.13, and 2.16 eV, respectively. The luminescence intensity depends on the number of the nanoclusters and will be decreased because of the micro-defects around the heterostructure, which is discussed in detail.     

On the harmonic oscillator on the Lobachevsky plane

We introduce the harmonic oscillator on the Lobachevsky plane with the aid of the potential V (ϱ) = (a ² ω ²/4) sinh(ϱ/a)², where a is the curvature radius and ϱ is the geodesic distance from a chosen center. Thus, the potential is rotationally symmetric and unbounded, as in the Euclidean case. The eigenvalue equation leads to the differential equation of spheroidal functions. We provide a basic numerical analysis of eigenvalues and eigenfunctions provided that the value of the angular momentum, m, is equal to 0. Dedicated to the memory of V. A. Geyler     

Growth,spectroscopic and laser properties of Yb<Superscript>3<Emphasis Type="Bold">+</Emphasis></Superscript>-doped GdAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> crystal: a candidate for infrared laser crystal

Yb³⁺:GdAl₃(BO₃)₄ (hereafter Yb³⁺:GAB) crystals with large sizes and good optical quality have been grown by the top-seed solution growth (TSSG) method. The polarized absorption and emission spectra have been investigated at room temperature. For the σ-polarization, the intensities of both absorption and emission spectra are stronger than those for the π-polarization, the σ-absorption cross section of Yb³⁺ in GAB being 3.43×10^-20 cm² at 977 nm, and the σ-emission cross section being 0.98×10^-20 cm² at 1045 nm. The fluorescence lifetime of the ² F _5/2→² F _7/2 transition was measured to be 800 μs in the 5% doped sample used for our laser experiments, 993 μs in a 10% doped sample and 569 μs in a 0.5% doped sample. The laser parameters were estimated as: β_min=0.022, I_sat=10.4 kW/cm² and I_min=0.23 kW/cm². About 0.4 W laseroutput at the wavelength of 1043 nm was achieved when the Yb³⁺:GAB crystal was pumped by a 974 nm laser diode, with 27.4% slope efficiency. PACS 42.55.-f; 42.70.Hj; 78.20.-e; 81.10.Dn