The Effects of CO2 Addition on the Partial Oxidation of Heptane for Hydrogen Generation

The effects of CO2 on the partial oxidation of heptane for hydrogen generation have been studied. Based on the experimental results and thermodynamic equilibrium calculations, the validity of CO2 addition to weaken the hot spots, and the feasibility of the autothermal operation are discussed.     

催化动力学光度法测定抗癌中草药中痕量硒Ⅰ．溴酸钾一罗丹明B体系

研究了硝酸介质中痕量硒(Ⅳ)催化溴酸钾氧化罗丹明B的褪色反应及动力学条件, 建立了动力学光度法测定痕量硒(Ⅳ)的新方法, 其灵敏度为0.905 μg·L-1, 测定范围0～9.6 μg*L-1. 用于测定抗癌中草药中的硒(Ⅳ), 获得了满意的结果.     

Multilinear Singular and Fractional Integrals

In this paper, we treat a class of non-standard commutators with higher order remainders in the Lipschitz spaces and give （L^v, L^q）, （H^p, L^q） boundedness and the boundedness in the Triebel- Lizorkin spaces. Our results give simplified proofs of the recent works by Chen, and extend his result.     

掺铁InP肖特基势垒增强InGaAs MSM光电探测器

采用ＬＰ－ＭＯＶＰＥ方法及常规器件工艺制成了ＩｎＰ：Ｆｅ肖特基势垒增强ＩｎＧａＡｓＭＳＭ光电探测器。用自建测试系统对其直流和瞬态特性进行了测试，测试结果表明，器件的击穿电压大于１０Ｖ，２Ｖ偏压下暗电流为１７０ｎＡ，对应的暗电流密度约为３ｍＡ／ｃｍ２；瞬态响应中上升时间ｔｒ为２１ｐｓ，半高宽ＦＷＨＭ为７５ｐｓ。     

双向随机区组设计在品种区域试验中的应用

本文将双向随机区组设计方法应用于品种区域试验中，在各试验点均采用双向随机区组设计，用较少的试验小区控制各试验点两个方向的土壤差异，减少试验误差，提高品种与地区交互效应的显著性，进而对品种进行稳定性与适宜性分析。     

半磁半导体Cd1-xMnxTe光吸收边的压力效应

本文研究了室温下1—40kbar流体静压力范围内三元化合物半磁半导体Cd_1-xMn_xTe光吸收边的压力效应。实验结果给出:x<0.5的样品,吸收边随压力增加向高能方向以α=6—8×10^-3eV/kbar的速率漂移,并具有10^-5/kbar²量级的二级非线性系数;x≥0.5的样品,表观吸收边随压力增加向低能方向漂移,压力系数为α-5×10^-3eV/kbar。高压下所研究的样品均有一从闪锌矿结构到NaCl结构的相变发生。这一相变可以是不可逆的,相变压力与样品组分有关,大致在25—40kbar范围内。根据半导体能带畸变势效应和晶体场理论模型估计了压力系数的理论值,讨论了不同压力系数的物理原因。 关键词：     

Characterization of the IF Noise of a Submillimeter SIS Receiver

A fitting method is presented here for the accurate characterization of the IF noise contribution of a sub-millimeter SIS receiver. By fitting the mixer's IF output power response and junction's IV curve of an SIS mixer without LO pumping, we can obtain the IF noise contribution, the physical temperature of the isolator connected just behind the SIS mixer, the output mismatching of the mixer, and the total gain of the IF chain. Differing from a conventional method, which only uses the normal-state (linear) branch of the junction's IV curve, the method proposed here also includes the nonlinear portion around the gap voltage. The dynamic resistance in this portion is varied dramatically, providing us a good probe to characterize the output mismatching of the mixer, as well as other parameters.