A new method of detecting interferogram in differential phase-contrast imaging system based on special structured x-ray scintillator screen

An x-ray scintillator screen with a special structure,functioning as detector and analyser grating,was proposed for collecting the interferogram of differential phase contrast imaging without absorption grating and difficulty of fabrication by a state of the art technique.On the basis of phase grating diffraction,a detecting model of the scintillator screen was built for analysing the phase and absorption information of objects.According to the analysis,a new method of phase retrievals based on two-images and the optimal structure of screen were presented.     

移动Ad Hoc网络动力学同步能力的研究

研究了移动Ad Hoc网络的动力学同步行为.用特征值比R来衡量网络的同步能力,特征值比R越小,同步能力越强.结果表明最初该网络的特征值比R随聚类系数C的增加而增加,继续增大聚类系数,特征值比反而减小.特征值比随聚类系数并不是普遍的正比关系也不是反比关系,而是先增大后减小,明显存在一个极值.     

利用Hyperion数据进行环境星HSI红边参数真实性检验

针对我国新发射运行的HJ-1A星HSI数据,利用高光谱分辨率的Hyperion数据进行了HJ-1A星HSI的光谱模拟,提取了红谷位置、红边位置、红边斜率和红边振幅等4个主要的红边参数,对真实与模拟环境星HSI数据的红边参数进行了对比分析,从而以Hyperion数据为参照检验了环境星HSI红边参数的真实性。研究结果显示,环境星HSI与模拟HSI的红边范围光谱反射率平均相关系数为0.946,标准差为0.011,为极显著相关,两种数据在红边范围内的光谱反射率变化高度一致;4个红边参数的相关系数分别为0.414,0.543,0.808和0.802,并且随植被覆盖度的变化呈现出明显的规律性,模拟与真实红边参数差值标准差分别为5.75,1.86,5.7e-4和0.024,认为环境星HSI的红边参数可以较好反映该区域植被变化所造成的红边光谱特征差异。     

枪晶石变温拉曼光谱及其固液相微结构研究

枪晶石在传统冶金连铸保护渣中起着十分重要的作用。采用紫外激光光源和电荷耦合器件(CCD)探测器,测定了枪晶石晶体和高温拉曼光谱(温度范围:298~1 723 K),观察了其在变温状态(升温和降温过程)下的特征谱变化。谱图结果显示,枪晶石熔态微结构单元与固态的相比更为多元化,表明熔体状态下多种团簇结构共存。同时,利用枪晶石晶胞结构模型,通过Dmol3密度泛函(DFT)理论计算了其分子振动频率,将其与实验值相结合,确定了特征谱峰的归属,为进一步采用拉曼光谱法原位研究保护渣中枪晶石的结构变化与行为特征提供了重要依据。     

Structural and elastic properties of Ce2O3 under pressure from LDA+U method

We investigate the structural and elastic properties of hexagonal Ce₂O₃ under pressure using LDA+U scheme in the frame of density functional theory (DFT). The obtained lattice constants and bulk modulus agree well with the available experimental and other theoretical data. The pressure dependences of normalized lattice parameters a/a ₀ and c/c ₀, ratio c/a, and normalized primitive volume V/V ₀ of Ce₂O₃ are obtained. Moreover, the pressure dependences of elastic properties and three anisotropies of elastic waves of Ce₂O₃ are investigated for the first time. We find that the negative value of C ₄₄ is indicative of the structural instability of the hexagonal structure Ce₂O₃ at zero temperature and 30 GPa. Finally, the density of states (DOS) of Ce₂O₃ under pressure is investigated.     

Anomalous Hall effect in ferromagnetic semiconductors

We present a theory of the anomalous Hall effect in ferromagnetic (III, Mn)V semiconductors. Our theory relates the anomalous Hall conductance of a homogeneous ferromagnet to the Berry phase acquired by a quasiparticle wave function upon traversing closed paths on the spin-split Fermi surface. The quantitative agreement between our theory and experimental data in both (In, Mn)As and (Ga, Mn)As systems suggests that this disorder independent contribution to the anomalous Hall conductivity dominates in diluted magnetic semiconductors. The success of this model for (III, Mn)V materials is unprecedented in the longstanding effort to understand origins of the anomalous Hall effect in itinerant ferromagnets.     

K_2S-activated carbons developed from coal and their methane adsorption behaviors

The main purpose of this work is to prepare various activated carbons by K2S activation of coal with size fractions of 60-80 meshes, and investigate the microporosity development and corresponding methane storage capacities. Raw coal is mixed with K2S powder, and then heated at 750 ℃-900 ℃ for 30 min-150 min in N2 atmosphere to produce the adsorbents. The texture and surface morphology are characterized by a N2 adsorption/desorption isotherm at 77 K and scanning electron microscopy （SEM）. The chemical properties of carbons are confirmed by ultimate analysis. The crystal structure and degree of graphitization are tested by X-ray diffraction and Raman spectra. The relationship between sulfur content and the specific surface area of the adsorbents is also determined. K2S activation is helps to bring about better development of pore texture. These adsorbents are microporous materials with textural parameters increasing in a range of specific surface area 72.27 m2/g-657.7 m2/g and micropore volume 0.035 cm3/g-0.334 cm3/g. The ability of activated carbons to adsorb methane is measured at 298 K and at pressures up to 5.0 MPa by a volumetric method. The Langmuir model fits the experimental data well. It is concluded that the high specific surface area and micropore volume of activated carbons do determine methane adsorption capacity. The adsorbents obtained at 800 ℃ for 90 min with K2S/raw coal mass ratios of 1.0 and 1.2 show the highest methane adsorption capacities amounting to 106.98 mg/g and 106.17 mg/g, respectively.     

Crystallization,Flame Retardancy and Mechanical Properties of Poly(Butylene Terephthalate)/Brominated Epoxy/Nano-Sb2O3 Composites Dispersed By High Energy Ball Milling

Nano-Sb2O3 particles and brominated epoxy resin (BEO) powders were dispersed in poly (butylene terephthalate) (PBT) by high energy ball milling (HEBM). Then the nanocomposites were prepared by a twin screw extruder. The influence of the nano-Sb2O3 particles on the crystallization, thermal stability, flame retardancy and mechanical properties of the PBT/BEO/nano-Sb2O3 composites were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limiting oxygen index (LOI), UL-94 tests and scanning electron microscopy (SEM). The results showed that the nano-Sb2O3 particles improved the crystallizability, thermal stability and flame retardancy properties of the PBT/BEO/nano-Sb2O3 composites. When the content of nano-Sb2O3 particles was 2.0?wt%, the LOI of nano-Sb2O3/BEO/PBT composites increased from 22.0 to 27.8 and the tensile strength reached its maximum value (62.44?MPa), which indicated that the optimum value of flame retardancy and mechanical properties of PBT/BEO/nano-Sb2O3 composites were obtained.     

Improving the precision of fluorescence lifetime measurement using a streak camera

Streak camera has high temporal resolution and high sensitivity, and is a powerful tool in biomedical study to measure fluorescence lifetime and perform fluorescence lifetime imaging. However, nonuniformity of the gain in the streak tube and nonlinearity of the sweeping speed limit the precision of fluorescence lifetime measurement, particularly when fluorescence lifetimes are short. We have constructed a two-photon excitation fluorescence lifetime measurement system that is based on a synchroscan streak camera and have developed accordingly a method to correct the effect of gain nonuniformity and nonlinearity of sweeping speed on the measurement precision. A continuous-wave laser of high stability is used to calibrate the gain of the streak camera, and a Fabry-Perot etalon is used to calibrate the nonlinearity of the sweeping speed. Fitting algorithms are used to correct the gain of the streak camera and nonlinearity of the sweeping speed respectively, which significantly improves the measurement precision of the system, as characterized through the fluorescence lifetime of the short-lived fluorescence dye, Rose Bengal. Experimental results show that the measurement fluctuation of the lifetime has been improved from more than 10% to 2% after correcting the effects of gain nonuniformity and sweeping speed nonlinearity.