双δ掺杂In0.65Ga0.35As/In0.52Al0.48As赝型高迁移率晶体管材料子带电子特性研究

研究了基于InP基的In0.65Ga0.35As/In0.52Al0.48As赝型高迁移率晶体管材料中纵向磁电阻的Shubnikov-deHaas(SdH)振荡效应和霍耳效应,通过对纵向磁电阻SdH振荡的快速傅里叶变换分析,获得了各子带电子的浓度,并因此求得了各子带能级相对于费米能级的位置.联立求解Schrdinger方程和Poisson方程,自洽计算了样品的导带形状、载流子浓度分布以及各子带能级和费米能级位置.理论计算和实验结果很好符合.实验和理论计算均表明,势垒层的掺杂电子几乎全部转移到了量子阱中,转移率在95%以上.     

Chiral planar waveguide for guiding single-mode backward wave

Single-mode backward wave is shown to be guided in a planar dielectric waveguide with a strong chiral core. The significant difference of such a waveguide from the traditional one is the guidance of single-mode backward wave, without using negative permittivity and/or negative permeability. In the design, we generalize the idea of total internal reflection to the chiral medium and make a numerical analysis on the reflection with oblique incidence. We deduce rigorously a general solution of incident wave on the boundary of two arbitrary chiral magneto-electric media. We observe that the impedance matching can eliminate the coupling between two eigenwaves in chiral media. With strong chiral core and the matched impedance with cladding, one eigenwave becomes a backward wave and can be guided without transferring to the other eigenwave. If a single-mode propagation condition is satisfied, we will get single-mode backward guided wave. A special interface has been designed to prevent the forward wave entering the waveguide from the source.     

Characteristics of cobalt-based alloy coating on tool steel prepared by powder feeding laser cladding

Co-based alloy coating was deposited on tool steel by powder feeding laser cladding. Sections of such coatings were examined to reveal their microstructures and phases using scanning electron microscope (SEM) and X-ray diffractometer (XRD). The results showed that the prime phase (γ-Co dendrite) and other phases, including Cr₂₃C₆, Co₇W₆, and CrNi existed in the coatings. Some different solidification morphologies, such as planar (at the interface), cellular and dendrite formed, varying from the interface to the surface. Fine microstructures of γ-Co dendrite and lamellar eutectic in dendritical regions strengthened the coatings. Besides, the effects of aged treatment on the microstructure and microhardness of the surface coating were studied. Aged treatment led to the precipitations of some carbide particles (Cr₇C₃ and Co₃C) and boride particles (Co₄B) from the cladded coating, causing an increase in microhardness in the laser-cladded coating.     

液相基质中重金属元素激光诱导击穿光谱实验参数的优化

针对混合溶液中重金属元素的激光诱导击穿光谱(LIBS)测量系统,为提高测量系统的检测灵敏度,以提高混合溶液中Ca和Cr金属元素LIBS光谱线强度的信噪比为目标,对LIBS测量系统中的激光脉冲能量、液相样品流速、ICCD门宽、延时等实验参数进行了优化,得到最优化参数激光脉冲能量、样品流速、ICCD门宽、延时分别为35 m J、30 ml/min、1400 ns和2400 ns,为降低LIBS技术应用于混合溶液中痕量重金属元素的检出限提供了实验参数支撑.     

超声波流速测量的多普勒频移提取方法研究

为了提高超声波多普勒法测量复杂流体流量的精度,针对流体的超声回波频率的复杂性,本文研究多普勒流速测量中的频偏提取方法。以傅里叶分析为理论基础,设计了硬件电路并获得代表回波平均频率的信号,然后以该信号作为输入,以数字鉴频法获得回波多普勒频移。基于该方法设计了一种超声多普勒流量测量系统,实验结果显示:油水混合流体流量的测量误差在3%以内,从而证实了此频偏提取方法的有效性。     

Targeting Upconversion Nanoprobes for Magnetic Resonance Imaging of Early Colon Cancer

Colon cancer (CC) is one of the most common intestinal malignancies and is difficult to detect in its early stage by magnetic resonance imaging (MRI) with currently used contrast agents (CAs). The development of targeted CAs contributes to the early diagnosis of CC and thereby enables early intervention and timely therapy. Considering the outstanding performance of upconversion nanoprobes (UCNPs) in high‐performance MR and fluorescence imaging, a new type of nanoprobes with considerably enhanced imaging performance is developed herein. Carcinoembryonic antigen (CEA) antibody is conjugated onto the surface of UCNPs to achieve the targeted imaging of early CC tumors, which overexpress CEA. Both toxicity tests and histological/hematological examinations demonstrate the excellent biocompatibility of these CC‐targeting nanoprobes, which possess great potential for clinical application in the early diagnosis of CC.     

KTP(001)晶体分光性能研究

根据同步辐射光源对软X射线分光晶体的性能要求,分析了软X射线能区常用分光晶体的性能优劣,指出对于晶格常数值大的分光晶体,KTP(KTiOPO₄)(011)是该能区比较理想的分光晶体. 同时提出了一种利用同步辐射光源测量晶体衍射效率的实验方法,指出光源的发散度与晶体的衍射效率密切相关. 测量了KTP(011)晶体的晶格常数,给出了KTP(011)晶体的实测衍射效率. 关键词： 同步辐射 KTP(011)晶体 衍射效率 光源发散度     

High-power 880-nm diode-directly-pumped passively mode-locked Nd:YVO₄ laser at 1342 nm with a semiconductor saturable absorber mirror

A high-power 880-nm diode-directly-pumped passively mode-locked 1342 nm Nd:YVO? laser was demonstrated with a semiconductor saturable absorber mirror (SESAM). The laser mode radii in the laser crystal and on the SESAM were optimized carefully using the ABCD matrix formalism. An average output power of 2.3 W was obtained with a repetition rate of 76 MHz and a pulse width of 29.2 ps under an absorbed pump power of 12.1 W, corresponding to an optical-optical efficiency of 19.0% and a slope efficiency of 23.9%, respectively.     

高压下ZnS的电子结构和性质

运用密度泛函理论体系下的平面波赝势(PWP)和广义梯度近似(GGA)方法，计算研究了闪锌矿结构的ZnS晶体在不同的外界压强下的电子结构. 通过分析发现，随着外界压强的增大，晶格常数和键长在不断缩小，从S原子向Zn原子转移的电荷越来越少，Zn—S键的共价性逐渐增强，Zn原子和S原子的态密度都有不同程度的变化，而且还有向低能量移动的趋势. 当外界压强达到24GPA时，ZnS从直接带隙半导体变成间接带隙半导体，而且随着压强的增大，间接带隙逐渐变小，直接带隙逐渐增大. 关键词： 闪锌矿结构 态密度 能带结构 密度泛函理论     

铌酸锂晶体中的磁光折变效应研究

对于掺铁铌酸锂晶体中不同全息记录配置下的磁光折变效应做了比较系统的理论分析，给出了铌酸锂晶体所有的磁光生伏打非零张量元. 详细计算并给出了不同全息纪录配置下的所有体光生伏打、磁光生伏打电流的解析形式. 理论结果表明，由于磁光生伏打效应引起了光激发电流的变化，所以对于每种配置全息光栅的衍射效率都会受到外加磁场的影响；对于不同的全息记录配置，磁场对铌酸锂晶体光折变非线性性质的影响也不同.讨论了一种确定特定张量元的方法. 关键词： 磁光生伏打 磁光折变效应 光生伏打