Complex thermal evaluation for 2,2′-azobis(isobutyronitrile) by non-isothermal and isothermal kinetic analysis methods

Azo compounds are widely used in dyes, pigments, blowing agents, and initiators. Unfortunately, these compounds contain the bivalent –N–N– composition which might be cleavaged readily even under high ambient temperature. The self-accelerating decomposition might cause a runaway reaction and lead to a fire or explosion when the cooling system fails or other upsets occur. To investigate the thermal stability parameters of 2,2′-azobis(isobutyronitrile) with thermal hazard and mechanism, differential scanning calorimetry and thermal activity monitor III were applied with non-isothermal method and isothermal method to obtain onset temperature (T ₀), maximum temperature (T _max), and heat of decomposition (ΔH _d). Thermal stability parameters play a pivotal role in thermal analysis, leading particularly to complex evaluation of the inherently safer design during preparation, processing, transport, or storage. The results provide sufficient thermokinetic parameters for process safety in terms of proactive loss prevention program.     

Synthesis of CuI Trifluoromethylselenates for Trifluoromethylselenolation of Aryl and Alkyl Halides

The development of new strategies for synthesis of trifluoromethylthiolate compounds is of considerable importance in pharmaceuticals, agrochemicals, and advanced materials. Accordingly, currently much attention is being devoted to the development of effective methods and reagents for their synthesis. In contrast, considerably less effort has been afforded to the development of preparing C?SeCF₃ bonds. Herein we report a concise route to synthesize a family of copper(I) trifluoromethylselenolate reagents by the reaction of CuI with the Ruppert’s reagent (Me₃SiCF₃), KF, and elemental selenium in the presence of dinitrogen ligands in CH₃CN at room temperature. The reagent [Cu(bpy)(SeCF₃)]₂ was proven to be air‐stable and highly efficient for nucleophilic trifluoromethylthselenolation of a broad range of (hetero)aryl halides and alkyl halides. This method represents a powerful protocol for the construction trifluoromethylselenolate compounds.     

Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals

Cellulosic nanocomposite membranes were prepared by incorporation of cellulose nanocrystals (CNCs) into a hydroxypropyl cellulose (HPC) matrix using a mixing/evaporation technique. CNCs were obtained from filter paper using the sulfuric acid hydrolysis method with the aid of ultrasonication. The relationship between the microstructure and mechanical properties of the CNCs/HPC nanocomposite membranes was studied. Scanning electron microscopy showed that the CNCs were well dispersed in the HPC matrix, and the fracture surface demonstrated a fibrous characteristic. With increasing CNCs content, the tensile strength and Young’s modulus of the CNCs/HPC nanocomposite membranes gradually increased. At 5 wt% content of CNCs, the strength was increased by 525 % and the Young’s modulus by 124 % compared with pure HPC membrane. Moreover, the effect of the phase change of HPC on the mechanical properties of the CNCs_5wt%/HPC nanocomposite membranes and the corresponding mechanism were also studied.     

X‐Ray Emission Spectroscopy: A Spectroscopic Measure for the Determination of NO Oxidation States in Fe–NO Complexes

Extensive study of the electronic structure of Fe‐NO complexes using a variety of spectroscopic methods was attempted to understand how iron controls the binding and release of nitric oxide. The comparable energy levels of NO π* orbitals and Fe 3d orbitals complicate the bonding interaction within Fe? NO complexes and puzzle the quantitative assignment of NO oxidation state. Enemark–Feltham notation, {Fe(NO)_x}ⁿ, was devised to circumvent this puzzle. This 40‐year puzzle is revisited using valence‐to‐core X‐ray emission spectroscopy (V2C XES) in combination with computational study. DFT calculation establishes a linear relationship between ΔE_σ2s*‐σ2p of NO and its oxidation state. V2C Fe XES study of Fe? NO complexes reveals the ΔE_σ2s*‐σ2p of NO derived from NO σ_2s*/σ_2p→Fe_1s transitions and determines NO oxidation state in Fe? NO complexes. Quantitative assignment of NO oxidation state will correlate the feasible redox process of nitric oxide and Fe‐nitrosylation biology.     

Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming

The paper reports the development of cement clinker-supported nickel （with metal loadings of 5 wt%, 10 wt%, 15 wt% and 20 wt%） catalysts for glycerol dry （CO2） reforming reaction. XRF results showed that CaO constituted 62.0% of cement clinker. The physicochemical characterization of the catalysts revealed 32-folds increment of BET surface area （SBET） with the addition of nickel metal into the cement clinker, which was also corroborated by FESEM images. Significantly, XRD results suggested different types of Ni oxides formation with Ni loading, whilst Ca3SiO5 and Ca2Al0.67Mn0.33FeO5 were the main crystallite species for pure cement clinker. Temperature-programmed reduction analysis yielded three domains of H2 reduction peaks, viz. centered at approximately 750 K referred to as type-Ⅰ peaks, another peaks at 820 K denoted as type-Ⅱ peaks and the highest reduction peaks, type-Ⅲ recorded at above 1000 K. 20 wt% Ni was found to be the best loading with the highest XG and H2 yield, whilst the lowest methanation activity. Syngas with lower H2/CO ratios （0.6 to 1.5） were readily produced from glycerol dry reforming at CO2-to-Glycerol feed ratio （CGR） of unity. Nonetheless, carbon deposit comprised of whisker type （Cv） and graphitic-like type （Cc） species were found to be in majority on 20 wt%Ni/CC catalysts.     

酸性金属氧化物对锰铈氧化物催化剂脱硝温度窗口的调控作用

利用溶胶-凝胶法,采用三种酸性金属氧化物（氧化铌、氧化钨和氧化钼）对锰铈复合氧化物催化剂进行了改性. 测试了催化剂的氮氧化物选择性催化还原（SCR）活性,以筛选对应不同温度窗口的合适酸性氧化物改性剂. 同时评价了催化剂的NO氧化和NH₃氧化活性. 利用X射线衍射、BET比表面积测试、H₂程序升温还原、NH₃/NO_x程序升温脱附和NH₃/NO_x吸附红外光谱等手段对催化剂进行了表征. MnO_x-CeO₂催化剂表现出良好的低温（100-150 ℃）活性. 酸性金属氧化物的添加削弱了催化剂的氧化还原特性,从而抑制了NH₃的活化和NO₂辅助的快速SCR反应. 与此同时,相对高温（250-350 ℃）区NH₃的氧化也受到了抑制,B酸和L酸上的NH₃吸附得以增强. 因此,催化剂的SCR脱硝温度窗口向高温移动,改性效果Nb₂O₅ < WO₃ < MoO₃.     

基于手机光线传感器为检测器的简易光度计的自组装设计

By using light sensors of the cellphone, we build a simple photometer which can be used in quantitative analysis experiments. We have performed 5 replicate measurements of iron with phenanthroline to verify reproducibility and stability. We find the absorbance of the sample has a good linear relationship with the concentrations of iron with a R² value around 0.999 and the RSD of 2.81%. The result is 4.94 μg·mL^-1 with spectrophotometer and 5.11 μg·mL^-1 with our photometer. The photometer is simple, convenient, accurate and realistic by using a phone as detector, which can replace the traditional spectrophotometer in the laboratory class. The students can enhance their understanding of the structure and principle of spectrophotometer by the DIY photometer experiment.     

介质材料二次电子发射特性对微波击穿的影响

以介质填充的平行板放电结构为例,本文主要研究了介质填充后微波低气压放电和微放电的物理过程.为了探究介质材料特性对微波低气压放电和微放电阈值的影响,本文采用自主研发的二次电子发射特性测量装置,测量了7种常见介质材料的二次电子发射系数和二次电子能谱.依据二次电子发射过程中介质表面正带电的稳定条件,计算了介质材料稳态表面电位与二次电子发射系数以及能谱参数的关系.在放电结构中引入与表面电位相应的等效直流电场后,依据电子扩散模型和微放电中电子谐振条件,分别探讨了介质表面稳态表面电位的大小对微波低气压放电和微放电阈值的影响.结果表明,介质材料的二次电子发射系数以及能谱参数越大,介质材料的稳态表面电位也越大,对应的微波低气压放电和微放电阈值也越大.所得结论对于填充介质的选择有一定的理论指导价值.     

液相色谱手性拆分机理的热力学方法研究

手性识别是分子识别的一个重要组成部分。液相色谱手性拆分机理研究有助于色谱条件的优化和新型手性固定相的设计,也有助于理解手性识别机制。本文就线性色谱与非线性色谱条件下手性拆分过程对应热力学参数的推求方法进行了评述,阐述了相关热力学参数的涵义及其在色谱保留及手性拆分机理探讨中的应用,并展望了该领域的研究前景。     

两个含有平行交替链的新型二氰胺配位高聚物: {Mn(dmpz)[N(CN)2]2}2和{Cu(dmpz)[N(CN)2]2}2

Two new dicyanamide coordination polymers, {Mn(dmpz)[N(CN)2]2}2 (1) and {Cu(dmpz)[N(CN)2]2}2 (2)(dmpz=3,5-dimethylpyrazole), were synthesized and characterized by single crystal X-ray diffraction analysis and IR spectroscopy. In 1 and 2 the metal ions have two different coordination modes, where one is coordinated to four dicyanamide anions and two monodentate dmpz molecules to form a slightly distorted octahedral geometry, while the other adopts octahedral geometry, surrounded by four nitrile N atoms and two amide N atoms of the dicyanamide anions. Both complexes contain two alternating chains that are parallel to each other.