Low Timing Jitter and Tunable Dual-Wavelength Picosecond Pulse Generation from a Fabry--Pérot Laser Diode with External Injection

A novel scheme to generate tunable dual-wavelength optical pulses with low timing jitter at arbitrary repetition rates is proposed and demonstrated experimentally. The pulses are generated from a gain-switched Fabry-Pérot laser diode with two external cw beams for injection seeding simultaneously. The cw light is generated by two independent distributed feedback laser diodes, and their wavelengths can be tuned independently by two temperature controllers. The dual-wavelength pulses with the pulse width of 57 ps, the timing jitter of 340 fs, are obtained. The sidemode-suppression ratio of the output pulses is better than 23dB over a 10-nm wavelength tuning range.     

Determination of the calcium species in coal chars by Ca K-edge XANES analysis

Ca-based additives have been widely used as a sulfur adsorbent during coal pyrolysis and gasification. The Ca speciation and evolution during the pyrolysis of coal with Ca additives have attracted great attention. In this paper, Ca species in the coal chars prepared from the pyrolysis of Ca(OH)2 or CaCO3-added coals are studied by using Ca K-edge X-ray absorption near-edge structural spectroscopy. The results demonstrate that Ca(OH)2 , CaSO4 , CaS and CaO coexist in the Ca(OH)2-added chars, while Ca(OH)2 and CaSO4 are the main species in the Ca(OH)2-added chars. Besides, a carboxyl-bound Ca is also formed during both the pyrolysis for the Ca(OH)2-added and the CaCO3-added coals. A detailed discussion about the Ca speciation is given.     

利用数值再现实现彩虹全息色差评价

为了在计算机制彩色彩虹全息图输出之前定量得到再现像的色彩保真度,提出了一种采用数值再现进行色差评价的方法.首先对彩虹全息图进行了频谱分析,得到再现参量与频谱分布之间的关系;然后采用频域滤波算法实现彩色彩虹全息图数值再现,得到再现像的相对功率谱分布;最后采用CIE1976UCS均匀颜色空间对再现像色差情况进行了计算.设计了7个色块并制作了计算机制真彩色彩虹全息图,以金卤射灯作为照明光源进行了光学再现实验,给出实验结果及分析.研究证明了采用数值再现方法实现对计算彩虹全息再现像光谱分布和色差进行计算分析是一种快速经济的方法.     

Measurement of Some (n,2N) Reaction Cross Sections for Producing Long Half-Life Residues

Measurement of (n,2n) reaction cross sections for some nuclides,whose residues have long half-lives,is described.The activation method relative to the ⁹³Nb(n,2n)^92mNb reaction cross section was used.The cross sections of the ¹⁵¹Eu(n,2n)^150mEu、¹⁵³Eu(n,2n)¹⁵²Eu、¹⁵⁹Tb(n,2n)¹⁵⁸Tb and ¹⁰⁹Ag(n,2n)^108mAg reactions in the neutron energy range of 13.50—14.80MeV were measured.The neutron energies in this experiment were determined by means of the method of cross section ratios for ⁹⁰Zr(n,2n)^89m+gZr and ⁹³Nb(n,2n)^92mNb reactions.The results obtained were compared with other existing data.     

Thermal-hydraulic analysis of LBE spallation target for accelerator-driven systems

In an accelerator-driven subcritical system (ADS), a high-performance spallation neutron source is used to feed the subcritical reactor. Neutron generation depends on the proton beam intensity. If the beam intensity is increased by a given factor, the number of generated neutrons will increase. The mechanism yielding a high rate of neutron production per energy is the spallation process, and this mechanism produces a very high-energy deposition in the spallation target material. Producing a high rate of neutrons is accompanied by creation of problems of decay heat cooling and radiological protection. As a first step in designing a full-scale industrial ADS, a small-scale experimental ADS, which is similar to the European experimental ADS (XADS) is analysed. The analysis presented in this paper is based on lead–bismuth eutectic (LBE) cooled XADS-type experimental reactors, designed during the European experimental (PDS-XADS) project. Computational fluid dynamics analysis has been carried out for the spallation target. Steady state behaviour and shear stress transport turbulence model with the automatic wall treatment were applied in the present analysis.     

白光LED用Ba3La（PO4）3∶Dy3+荧光粉的制备与发光性能

通过高温固相法合成了一系列Ba3La1-x(PO4)3∶xDy3+荧光粉材料。利用XRD测量样品的物相,结果显示样品为纯相Ba3La(PO4)3晶体。样品的激发光谱由一系列宽谱组成,峰值分别位于322,347,360,386,424,451 nm。在347 nm激发下,荧光粉在482 nm(4F9/2→6H15/2)和575 nm(4F9/2→6H13/2)处有很强的发射。研究了不同Dy3+掺杂浓度对样品发射光谱的影响,当Dy3+摩尔分数x=0.10时出现猝灭现象,浓度猝灭机理为电偶极-电偶极相互作用。确定了不同Dy3+掺杂浓度的Ba3La(PO4)3∶Dy3+的荧光寿命。Ba3La(PO4)3∶Dy3+荧光粉发射光谱的色坐标位于白光区域。     

随机介质的相干背散射与局域化研究

研究了不同尺度参数和粒子浓度下的ZnO随机介质相干背散射强度的分布规律,采用时域有限差分法分析了不同浓度随机介质的光场能量空间分布,预测了随机激光器阈值的高低。结果表明:同一折射率的介质随着介质尺寸的增大,相干背散射的带宽变窄,局域化参量kl值相应增大,使得局域化程度呈较大幅度减弱趋势;并且随着介质浓度的增加,相干背散射的带宽变宽,局域化程度增强,阈值降低。相干背散射有着光子局域化的先期特征,现在已成为研究光子局域化出现与否的基本判断依据,对研究光子局域化以及随机激光器具有重要意义。     

利用CdTe量子点增敏鲁米诺-过氧化氢化学发光体系测定水环境中的对苯二酚

在碱性条件下,CdTe量子点对鲁米诺-过氧化氢化学发光体系具有显著的增敏作用,而对苯二酚对该体系的化学发光有强烈的抑制作用,以此建立了流动注射化学发光检测对苯二酚的新方法。在优化实验条件下,在1.0～25 nmol·L-1范围内对苯二酚的浓度与化学发光强度的抑制值ΔI呈良好的线性关系(R2=0.993 2),检出限为0.76 nmol·L-1,经实际应用证明,该方法可用于水环境中对苯二酚的测定。此外,对CdTe量子点增敏鲁米诺-过氧化氢化学发光体系的机理进行了探讨。     

基于红外光谱分析的小温差物体距离估计

基于辐射传输特性的目标距离估计作为一项典型的被动测距技术,是目前光电对抗领域的一个研究热点。在测距过程中无需向外界发射能量,使得这种探测方式极大地增强了导弹或无人机的隐身能力和突防能力。针对现有被动测距系统不适用于对迎面而来目标物体实施被动距离估计的不足,提出了一种改进的小温差目标距离估计方法。在引入了信号传递函数概念的基础上,明确了当前算法的工作曲线,指出这种方法的非线性会导致目标距离估值不唯一的风险。本文应用非线性校正技术,构造了新的距离估计算法。得到了一个利用3~5和8~12 μm双波段红外传感信息,目标背景温度和气象条件的测距公式。研究表明,当目标与背景表观温差等于5 K、而背景温度估计偏差不超过±5 K时,目标距离估计误差可控制在10%左右。