酸糖蛋白手性柱分离6种手性化合物

通过考察缓冲液种类、浓度及其pH值对对映体在手性柱上的保留和分离行为的影响,以及流动相中加入不同种类、不同浓度的不带电荷的有机溶剂乙腈、甲醇、正丙醇、异丙醇、流动相流速和柱温对对映体分离能力的影响,优化了含碳手性中心的碱性药物苯丙哌林、酸性化合物MT-A5及MT-酸和含硫手性中心的质子泵抑制剂奥美拉唑、泮托拉唑、雷贝拉唑对映体分离条件,最佳手性分离条件为:苯丙哌林,0.05 mol/L磷酸二氢铵缓冲液(pH 3.0)-乙腈(95∶5,V/V)为流动相,流速为0.7 mL/m in,柱温为20℃;MT-A5及MT-酸,流动相为0.01 mol/L醋酸铵缓冲液(pH 5.0)-乙腈(74∶26,V/V),流速为0.9 mL/m in,柱温为20℃;泮托拉唑,流动相为10 mmol/L醋酸铵缓冲液(pH 5.5)-乙腈(93∶7,V/V),流速为0.9 mL/m in;柱温为20℃;奥美拉唑和雷贝拉唑,流动相为0.01 mol/L醋酸铵缓冲液(pH 3.0)-乙腈(95∶5,V/V),流速为0.7 mL/m in,柱温为20℃。实现了应用高效液相色谱法在α1-酸糖蛋白手性柱上对上述化合物的对映体分离,并成功用于手性药物合成中的对映体过量百分率的测定。     

Characteristics and structures of weak efficient surfaces of production possibility sets

This paper studies the characteristics and structure of the weak surface of the production possibility set. We apply techniques and methods of transferring a polyhedral cone from its intersection form to its sum form, identify an intersection representation of the production possibility set. We give the structure theorem of weak surface of the production possibility set, which includes three complementary slackness conditions. We define the input weak efficiency and output weak efficiency for different DEA models according to the representation of the intersection form. It investigates the characteristics of the weak surfaces, and proves the structure theorems of input weak DEA efficiency and output weak DEA efficiency. The structure theorems establish weighted combination of inputs and outputs that are weak DEA efficient. Numerical examples are provided for illustration.     

Crystallographic report: Bis(norfloxacin)dilead(II) tetranitrate, [Pb2(H‐Norf)2(ONO2)4]

The centrosymmetric binuclear structure of [Pb₂(H‐Norf)₂(ONO₂)₄]shows the geometry around each lead(II) atom to be distorted trigonal bipyramidal with Pb–O distances ranging from 2.357(3) to 2.769(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

四种多变量校准方法在FTIR多组分分析中的性能比较

本文对四种多变量校准方法－－经典最小二乘法（CLS），偏最小二乘法（PLS），卡尔曼滤波法（KFM）以及人工神经网络法（ANN）－－在多组分浓度分析方面的性能进行了比较。选择五种红外谱图严重混叠的大气有机毒物－－1，3－丁二烯，苯，邻二甲苯，氯苯和丙烯醛－－作为分析对象。分别计算各种方法对该5组分体系的平均预测误差MPE和平均相对误差MRE进行比较。结果表明，偏最小二乘法在处理这类问题中是最稳健的方法。     

Efficient Synthesis of the Oxadiazole Biphenyl Tetrazoles

Since the discovery of losartan[1](DUP 753), the leading non-peptide AT1 antagonist, several highly potent AT1 selective antagonists bearing heterocycles have been reported. [2] The tetrazole group is a common acidic functionpresent in many these antagonists.     

在白噪声分析中的广义维里拉普拉斯

一类广义维里拉普拉斯，把在白噪声分析构架中通常定义的维里拉普拉斯作为特殊情形而包含。     

单件小批生产系统下模糊优化的动态随机投入产出模型

本文针对单件小批量生产系统 ,建立了模糊优化的动态随机投入产出模型 ,同时给出了该模型的递推解法 ,并用此模型对某单件小批企业在生产计划期的商品量进行了规划     

聚醚醚酮链结构与反应的模型化合物的量子化学研究

利用ＡＭ１方法对聚醚醚酮模型化合物全优化，结果为：芳环平均相互扭转角为３３．０度，桥键角１１７．０－１１８．０度，其分子结构拓扑图形表明：所有苯环（核）为平面构型，但其内角扭曲；其氢原子对苯环构型无实质性贡献，在更长链的计算中，冻结苯核与氢原子也得出满意结果，根据Ｍｕｌｌｉｋｅｎ键序与电荷讨论了醚交换与磺化反应。     

颗粒增强复合材料热应力分析的双层嵌套模型

建立了一个把增强颗粒球和基体空心球嵌入等效复合介质空腔中的“双层嵌套模型”,研究了颗粒增强材料自高温冷却下来时,不同相中热应力的分布特点。推出了热应力在弹性和弹塑性状态的各种表达式。研究表明,随着温度降低,增强体受到压应力,基体材料中存在的静水应力为拉应力。温度继续下降,将出现自增强颗粒与基体界面向外扩展的屈服区。随增强相体积分数增大,增强颗粒受到的压应力和基体中的静水拉应力减小,增强颗粒与基体界面屈服的起始温差增大,而基体材料全面屈服的温差却减小。     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007