Detection and quantification of proteins and cells by use of elemental mass spectrometry: progress and challenges

Much progress has been made in identification of the proteins in proteomes, and quantification of these proteins has attracted much interest. In addition to popular tandem mass spectrometric methods based on soft ionization, inductively coupled plasma mass spectrometry (ICPMS), a typical example of mass spectrometry based on hard ionization, usually used for analysis of elements, has unique advantages in absolute quantification of proteins by determination of an element with a definite stoichiometry in a protein or attached to the protein. In this Trends article, we briefly describe state-of-the-art ICPMS-based methods for quantification of proteins, emphasizing protein-labeling and element-tagging strategies developed on the basis of chemically selective reactions and/or biospecific interactions. Recent progress from protein to cell quantification by use of ICPMS is also discussed, and the possibilities and challenges of ICPMS-based protein quantification for universal, selective, or targeted quantification of proteins and cells in a biological sample are also discussed critically. We believe ICPMS-based protein quantification will become ever more important in targeted quantitative proteomics and bioanalysis in the near future.

Mild and Efficient Syntheses of 1-Aryl-3,4-dihydroisoquinolines and 1-Aryl-3,4-dihydro-β-carbolines via Regiospecific β-Eliminations of the Corresponding N-Tosyl-1,2,3,4-tetrahydroisoquinolines and N-Tosyl-1,2,3,4-tetrahydro-β-carbolines

Treatment of N-tosyl-1-aryl-1,2,3,4-tetrahydro-isoquinolines or N-tosyl-1-aryl-1,2,3,4-tetrahydro-β-carbolines with a strong base such as NaOH or KOH at 70 °C in dimethylsulfoxide (DMSO) produced 1-aryl-3,4-dihydroisoquinolines or 1-aryl-3,4-dihydro-β-carbolines in good yields via mild and regiospecific β-eliminations. A dramatic solvent effect was observed, DMSO was crucial for the reactions. The temperature is also crucial for the reactions and should be kept between 60 and 80 °C.     

Syngas production from methane over CeO2-Fe2O3 mixed oxides using a chemical-looping method

A series of mixed oxides Ce_{1 ? x} Fe _x O₂ was prepared by a hydrothermal method. XRD and Raman spectra were measured to study the structure of the prepared materials. The temperature-programmed reduction was undertaken to estimate reducibility of the oxides. Syngas generation from methane using these materials as oxygen carriers/catalysts via a chemical-looping procedure was investigated in detail. This procedure includes catalytic oxidation and decomposition of methane to produce H₂-rich gas at the first step followed by the production of the CO-rich gas by oxidizing the carbon deposited on deactivated catalysts. The results showed that all iron ions were incorporated into the ceria lattice with the formation of oxygen vacancies in the Ce_0.9Fe_0.1O₂ sample, while isolated Fe₂O₃ particles were distributed on the surface of the Ce_0.8Fe_0.2O₂ sample. TPR measurements and the analysis of the two-step chemical-looping reactions indicated a strong interaction between the Ce and Fe species which accounts for an increased activity of the mixed oxides in the syngas generation compared to that of individual oxides. Among the several samples, the Ce_0.8Fe_0.2O₂ catalyst showed the highest activity for methane partial oxidation due to the synergetic effects caused by the interaction of surface iron entities and Ce-Fe solid solution. In addition, selective oxidation of carbon by oxygen to CO can also be found over this material since gaseous products are formed at the carbon oxidation step with the selectivity to CO reaching 91.2%. Evidence is presented that syngas can be feasibly produced from methane with high selectivity via the chemical-looping procedure over the CeO₂-Fe₂O₃ mixed oxides.     

Synthesis of β,β′-edge fused, π-extended porphyrins and their applications in the dye-sensitized solar cells

Four π-extended, β,β′ aromatic ring fused porphyrins including mono- and opp-dibenzoporphyrins bearing two carboxyl groups at only one fused benzo group were synthesized. The optical results by UV–vis spectroscopy indicate that when compared with the absorption spectra of monobenzoporphyrins, greater light-harvesting capabilities can be realized for opp-dibenzoporphyrins with two benzo group at the opposite β,β′ positions of the porphyrin. The photovoltaic properties of these π-extended porphyrins were examined for the first time and the highest conversion efficiency of 1.62% was realized for opp-dibenzoporphyrin 8a-sensitized solar cell, which is ∼60% higher than that of monobenzoporphyrin 4a based solar cell indicating the effect of an extra aromatic π conjugation on the light-harvesting capabilities of π-extended porphyrins. Subsequent DFT calculation results supported our results obtained in the optical and photovoltaic studies.     

Synthesis of aromatic diamine-based benzoxazines and effect of their backbone structure on thermal and flammability properties of polymers

Three kinds of novel aromatic diamine-based benzoxazines containing naphthalene, propane-2,2-diyldibenzene and neopentyl groups in the backbone, respectively (designated as BAPNCP, BAPBACP and BAPNPGCP, respectively), were synthesized and characterized. In addition, the effects of backbone structures on curing behaviors of the monomers and thermal and flammability properties of the resulting polymers were systematically studied. The results indicated that BAPNPGCP displayed the highest enthalpy of the curing reaction associated with the ring-opening of benzoxazine, which was due to the effect of benzoxazine ring content per unit mass. Interestingly, the 5 wt% weight loss temperature and char residue after thermogravimetric test for poly(BAPNPGCP) were 8 °C and 7% higher than those of poly(BAPBACP). Meanwhile, the total heat release of poly(BAPNPGCP) was less than half of that for poly(BAPBACP), indicating the substantial effect of benzoxazine ring content on flammability and char formation. Furthermore, it was found that poly(BAPNCP) gave the best thermal stability and flame retardancy, which was due to the synergistic effect between naphthalene group and benzoxazine ring content. This study provides new insight into the curing behavior of benzoxazine and further understanding on the high performance of polybenzoxazine.     

Synthesis of Betulin-3-yl-β-D-Glucopyranoside

Two concise routes toward betulin-3-yl-β-D-glucopyranoside, being different in the protection of primary alcohol of betulin, were developed. The synthesis adopted a stepwise glycosidation method employing glycosyl trichloroacetimidate as donor.     

Highly transparent silica monoliths embedded with high concentration oxide nanoparticles

Silica monoliths embedded with high concentration of γ-Fe₂O₃ or TiO₂ nanoparticles were prepared by a sol–gel procedure designed according to the inherent properties of oxide colloids. In the first step, highly dispersible oxide nanoparticles were produced using an in situ modification sol–gel strategy. Then, these particles were re-dispersed in silicon alkoxide-containing solution to form a stable colloidal solution. The hydrolysis and condensation reactions of alkoxide were catalyzed by an organic base (morpholine). Due to the large molecule size of morpholine, the electric double layer on the surface of colloidal particles was not compressed by the ionized morpholine molecules. The colloidal solution thus remained stable during the gelation process. Through this procedure, oxide nanoparticles could be immobilized homogeneously in the pores of a silica matrix, forming highly transparent and crack-free monoliths.     

Exploring the Reactivity of Multicomponent Photocatalysts: Insight into the Complex Valence Band of BiOBr

The band structure of multicomponent semiconductor photocatalysts, as well as their reactivity distinction under different wavelengths of light, is still unclear. BiOBr, which is a typical multicomponent semiconductor, may have two possible valence‐band structures, that is, two discrete valence bands constructed respectively from O 2p and Br 4p orbitals, or one valence band derived from the hybridization of these orbitals. In this work, aqueous photocatalytic hydroxylation is applied as the probe reaction to investigate the nature and reactions of photogenerated holes in BiOBr. Three organic compounds (microcystin‐LR, aniline, and benzoic acid) with different oxidation potentials were selected as substrates. Isotope labeling (H₂¹⁸O as the solvent) was used to determine the source of the O atom in the hydroxyl group of the products, which distinguishes the contribution of different hydroxylation pathways. Furthermore, a spin‐trapping ESR method was used to quantify the reactive oxygen species (^.OH and ^.OOH) formed in the reaction system. The different isotope abundances of the hydroxyl O atom of the products formed, as well as the reverse trend of the ^.OH/^.OOH ratio with the oxidative resistance of the substrate under UV and visible irradiation, reveal that BiOBr has two separate valence bands, which have different oxidation ability and respond to UV and visible light, respectively. This study shows that the band structure of semiconductor photocatalysts can be reliably analyzed with an isotope labeling method.     

Synthesis,Characterization and Biological Evaluation of Two Silver(I) trans‐Cinnamate Complexes as Urease Inhibitors

Two new silver(I) trans‐cinnamates, namely [Ag(2‐cca)(H₂O)]₂ ( 1 ) and [Ag(4‐cca)]_n ( 2 ) (2‐ccaH = 2‐chlorocinnamic acid and 4‐ccaH = 4‐chlorocinnamic acid), were synthesized and structurally characterized. Single crystal X‐ray studies reveal that each silver(I) atom in 1 is two‐coordinate by a 2‐chlorocinnamate ligand and one water molecule to afford a discrete centrosymmetric dimer with the ligand‐unsupported Ag···Ag interactions (3.218(4) Å), while a pair of symmetry‐related silver(I) atoms in 2 are clamped by two μ₂‐η¹:η¹ 4‐chlorocinnamate ligands to yield a binuclear silver(I) moiety incorporating a ligand‐supported Ag···Ag interaction (2.819(5) Å). Both complexes 1 and 2 show potent urease inhibitory activities with the respective IC₅₀ values of 0.66 and 1.10 μM.     

Palladium‐Catalyzed C(sp3)?H Activation: A Facile Method for the Synthesis of 3,4‐Dihydroquinolinone Derivatives

3,4‐Dihydroquinolinones were synthesized by the palladium‐catalyzed, oxidative‐addition‐initiated activation and arylation of inert C(sp³) H bonds. Pd(OAc)₂ and P(o‐tol)₃ were used as the catalyst and ligand, respectively, to improve the efficiency of the reaction. A further advantage of this reaction is that it could be performed in air. A relatively rare seven‐membered palladacycle was proposed as a key intermediate of the catalytic cycle.