Synthesis and Crystal Structure of 7α-[（R）-1-Hy droxyl-1-methyl-3-（ thien-2-yl）-propyl]-6,14-endoethanotetrahydrothebaine

1 INTRODUCTION Opioid analogues still remain important drugs for the relief of severe pain and morphine is still the drug of choice in such situations. For many years, the search for new centrally acting opioid deriva- tives with pain-relieving properties and without un- desired side effects, such as addiction, obstipation, etc., has been the goal of a large number of scien- tists[1-3]. Consequently, a wide variety of modifyca- tions of the well-known alkaloids morphine, codeine and thebai…     

PBA@POM Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

To realize the effective conversion of renewable energy through water decomposition, efficient electrocatalysts for the oxygen evolution reaction (OER) are essential. In this article, PBA@POM was successfully prepared with a Prussian blue analogue (PBA) as the initial structure. A facile hydrothermal process is reported for obtaining PBA@POM by etching the cubic PBA with a strong Brønsted acid, H₃PMo₁₂O₄₀ (HPMo). The hollow cube structure not only exposes more active sites but also promotes electron transport, which results in excellent electrocatalytic activity for the OER. Compared with the PBA, which initially simply adhered to POM, the optimum PBA@POM hybrids display remarkably enhanced OER catalytic activity, with an almost constant overpotential of 440 mV at a current density of 10 mA cm^?2 and a small Tafel slope (23.45 mV dec^?1). The facilely prepared PBA@POM with good electrochemical activity and stability promises great potential for the OER.     

Classificatin of chinese tea samples according to origin and quality by principal component techniques

Three categories of tea, black, green and oolong tea, with those varieties in each category were analyzed for their contents of cellulose, hemicellulose, lignin, polyphenols, caffeine and amino acids. The data were subjected to multivarige analysis. Principal component analysis and principal component classification provide discrimination between the different categories and varieties. The quality index, assigned to these tea standards by experts, could be predicted form the principal component scores.     

Catalyzed collapse and enhanced hydrogen storage of BN nanotubes

The novel morphology of BN nanotubes with a collapsed structure has been discovered by a metal-catalyzed treatment. The collapse causes the dramatic enlargement of a specific surface area of BN nanotubes and remarkably enhances the hydrogen storage capacity of BN nanotubes.     

Degradation of 4-Chlorophenol using a Gas–Liquid Gliding Arc Discharge Plasma Reactor

The gas–liquid gliding arc discharge plasma is used directly to study degradation and dechlorination of 4-Chlorophenol (4-CP) in solution. The typical AC waveforms of discharge voltage and current revealed that the discharge behavior was not definitely periodic. The chemical oxygen demand (COD) abatement of 4-CP solution with stainless steel electrode is higher than that with aluminum or brass electrode; When air was used as carrier gas the COD abated from 1,679.2 to 190 mg/L (i.e., 88.68% abatement) after 76 min plasma treatment; Increasing gas–liquid mixing rate could also increase the degradation of 4-CP; adding appropriate amounts of Fe²⁺ or iron chips to the solution were found to be favorable for 4-CP degradation. The main intermediates of 4-CP degradation are p-benzoquinone, hydroquinone, 4-chlorocatechol, p-chloronitrobenzene, and ring cleavage products (acetic acid, glycol, propanone, and others). Furthermore, possible pathways of 4-CP degradation in solution are proposed.     

Single-crystalline LaB6 nanowires

Lanthanum hexaboride nanowires produced by chemical vapor deposition are single-crystalline and grown along the [111] direction. Streaks appearing in the electron diffraction spots indicate the lateral direction perpendicular to the nanowire growth axis.     

Novel preparation of organic polymer-based monolithic column by microwave irradation

Microwave irradiation was firstly attempted for the preparation of organic-based monoliths of poly（styrene-divinylbenzene- methacrylic acid）, which single step in situ polymerization was carried out during 15 min. The colunm permeability, electrophoretic and chromatographac behaviors were comparatively evaluated using pressure-assisted CEC, GEC and low pressure-driven separation modes. The largest theoretical plates for the preparing column could be close to 18,0000 plates/m for thiourea in the mode of p-CEC. It provided a viable alternative to traditional initiation means for the perparation of monolithic capillary columns.     

Over 18% binary organic solar cells enabled by isomerization of non-fullerene acceptors with alkylthiophene side chains

Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.

     

ZnCl2熔盐的分子动力学模拟

近年来，若干作者根据几种粒子间函数，对ZnCl2熔盐结构做过分子动力学模拟［1－3］其出的Zn－Cl和Cl－Cl离子间的偏径向分布函数与中子衍射实测值符合较好，但Zn－Zn离子间距以及Zn－Zn间配位数计算值多偏高．鉴于Busing势函数在多价卤化物馆盐的分子动力学计算中应用效果较好[4],我们试用Busing势函数为基础对ZnCl2熔盐结构和能量做分子动力学计算．1研究方法计算所用粒子势为Busing势函数此处，Zi为离子的电行数（ZZn。＋＝2，Zcl－＝1），几；是离子有效半径，人为＊离子的“硬度”参数·据文献问，f二0．005071，尸zn。十二0．…