Direct numerical simulation of settling of a large solid particle during bioconvection

Settling of a large solid particle in bioconvection flow caused by gyrotactic microorganisms is investigated. The particle is released from the top of the bioconvection chamber; its settling pattern depends on whether it is released in the centre of the bioconvection plume or at its periphery. The Chimera method is utilized; a subgrid is generated around a moving particle. The method suggested by Liu and Wang (Comput. Fluid 2004; 33 :223–255) is further developed to account for the presence of a moving boundary in the streamfunction‐vorticity formulation using the finite‐difference method. A number of cases for different release positions of the particle are computed. It is demonstrated that bioconvection can either accelerate or decelerate settling of the particle depending on the initial position of the particle relative to the plume centre. It is also shown that the particle impacts bioconvection plume by changing its shape and location in the chamber. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Crystal structure and morphology of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state

A series of crystals of phenyl‐capped tetraaniline in the leucoemeraldine oxidation state were obtained at different isothermal temperatures and were observed directly under transmission electron microscope. The crystals obtained at higher temperatures exhibit more perfect structures than those obtained at lower temperatures. Both the lamella thickness and the crystal size increase with crystallization temperature. The tetraaniline is apt to form larger scale crystals under lower degree of supercooling. However, their crystal structures keep steady with the crystallization temperature. The tetramer was found to adopt a monoclinic lattice with unit cell parameter of a = 13.93 Å, b = 8.82 Å, c = 23.20 Å, and β = 95.03°, as determined using electron diffraction tilting method combined with wide‐angle X‐ray diffraction experiment. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 764–769, 2006     

Synthesis,Characterization and Application of Amine-Functionalized Hierarchically Micro-Mesoporous Silicon Composites for CO2 Capture in Flue Gas

An efficient CO₂ adsorbent with a hierarchically micro-mesoporous structure and a large number of amine groups was fabricated by a two-step synthesis technique. Its structural properties, surface groups, thermal stability and CO₂ adsorption performance were fully investigated. The analysis results show that the prepared CO₂ adsorbent has a specific hierarchically micro-mesoporous structure and highly uniformly dispersed amine groups that are favorable for the adsorption of CO₂. At the same time, the CO₂ adsorption capacity of the prepared adsorbent can reach a maximum of 3.32 mmol-CO₂/g-adsorbent in the actual flue gas temperature range of 303–343 K. In addition, the kinetic analysis results indicate that both the adsorption process and the desorption process have rapid adsorption/desorption rates. Finally, the fitting of the CO₂ adsorption/desorption experimental data by Avrami’s fractional kinetic model shows that the CO₂ adsorption rate is mainly controlled by the intra-particle diffusion rate, and the temperature has little effect on the adsorption rate.     

Non-Invasive Detection of Anti-Inflammatory Bioactivity and Key Chemical Indicators of the Commercial Lanqin Oral Solution by Near Infrared Spectroscopy

Quality control methods of current traditional Chinese medicine (TCM) preparation is time-consuming and difficult to assess in terms of overall efficiency of the drug. A non-destructive rapid near-infrared spectroscopy detection system for key chemical components and biological activity of Lanqin oral solution (LOS), one of the best-selling TCM formulations, was established for comprehensive quality evaluation. Near infrared spectral scanning was carried out on 101 batches of commercial LOS under the penetrated vial state and traditional state. RAW 264.7 cells were cultured to detect the anti-inflammatory ability of LOS, and the reference concentrations of epigoitrin, geniposide, and baicalin were obtained by HPLC. The quantitative models were optimized by three kinds of variable selection methods. The correlation coefficients of prediction value of the models were greater than 0.94. The system also passed the external validation. The performance of the non-invasive models was similar to the traditional models. The established non-destructive system can be applied to the rapid quality inspection of LOS to avoid unqualified drugs from entering the market and ensure drug effectiveness. The biological activity index of LOS was introduced and predicted by NIRs for the first time, which provides a new idea about the quality control of TCM formulations.     

On the linearization of the coupled Harry－Dym soliton hierarchy

This paper is devoted to the study of the underlying linearities of the coupled Harry--Dym (cHD) soliton hierarchy, including the well-known cHD equation. Resorting to the nonlinearization of Lax pairs, a family of finite-dimensional Hamiltonian systems associated with soliton equations are presented, constituting the decomposition of the cHD soliton hierarchy. After suitably introducing the Abel--Jacobi coordinates on a Riemann surface, the cHD soliton hierarchy can be ultimately reduced to linear superpositions, expressed by the Abel--Jacobi variables.     

Large coercivity and unconventional exchange coupling in manganese-oxide-coated manganese gallium nanoparticles

The microstructures and magnetic properties of nanoparticles, each composed of an antiferromagnetic （AFM） manganese-oxide shell and a ferromagnetic-like core of manganese-gallium （MnGa） compounds, are studied. The coreshell structure is confirmed by transmission electron microscope （TEM）. The ferromagnetic-like core contains three kinds of MnGa binary compounds, i.e., ferrimagnetic （FI） DO22-type MnaGa, ferromagnetic （FM） Mn8Gas, and AFM DO19-type Mn3Ga, of which the first two correspond respectively to a hard magnetic phase and to a soft one. Decoupling effect between these two phases is found at low temperature, which weakens gradually with increasing temperature and disappears above 200 K. The exchange bias （EB） effect is observed simultaneously, which is caused by the exchange coupling between the AFM shell and FM-like core. A large coercivity of 6.96 kOe （1Oe = 79.5775 A·m^-1） and a maximum EB value of 0.45 kOe are achieved at 300 K and 200 K respectively.     

Discussion again of the magnetic and transport property of Ag-doped LaMnO3

Samples La_1−aAg_aMnO₃ (0.05?a?0.50) were sol–gel fabricated. A part of Ag was found to dissociate and run off the samples in sintering process when sintering temperature exceeds 700 °C, resulting in a composite of La_1−xAg_xMnO₃ and MnO₂/Mn₂O₃. The magnetic and transport properties of the composite have been studied. The sample with the nominal composition La_0.7Ag_0.3MnO₃ was found to show the greatest magnetoresistance in the sample group. Detailed analysis on average Mn valence reveals a composite of (La_0.985Ag_0.015MnO₃)_0.776[(MnO₂)_0.590(Mn₂O₃)_0.410]_0.224. Its MR ratio at room temperature exceeds 24% under a field of 1.8 T. A conductivity leap has been observed around a=0.30. It suggests a kind of field-induced fluctuation in percolation in the samples investigated.     

相变域硅薄膜材料的光稳定性

采用RF-PECVD技术，通过改变反应气体的硅烷浓度制备了一系列不同晶化率不掺杂的硅薄膜材料，研究了工艺变化对材料结构的影响及材料光电特性同微结构的关系.随后进行了光衰退试验，在分析光照前后光电特性变化规律的基础上，认为材料中的非晶成分是导致材料光电特性衰退的主要原因.在靠近过渡区非晶一侧的硅材料比普通非晶硅稳定，衰退率较少；高晶化率微晶硅材料性能稳定，基本不存在光衰退；在靠近过渡区微晶一侧的硅材料虽然不是完全不衰退，但相比高晶化率硅材料来说更适合制备高效微晶硅电池. 关键词： 射频等离子体增强化学气相沉积 硅薄膜 Staebler-Wronski(SW)效应 稳定性