Application of non-thermal atmospheric pressure ac plasmas to the carbon dioxide reforming of methane

Methane conversions of 11.9%, yields of hydrogen as high as 23.3% and energy yields of 1.0 mol H₂/kWh have been achieved from CO₂ reforming of CH₄ in non-thermal, atmospheric pressure plasma reactors with Pt coated electrodes. Two reactors have been studied. A novel fan type reactor consisting of a movable rotor and immobile stator produced the highest yields in contrast to a tube type (silent discharge) reactor with a glass dielectric barrier. Conversions, yields of hydrogen and energy yields (expressed as mol H₂/kWh) were studied for CO₂/CH₄ concentrations of 1.1% and 5.0% in He as a function of flow rate and input voltage. Hydrogen yields are observed to increase as the input voltage is increased from 411 V to 911 V and the flow rate is decreased from 100 cc/min to 30 cc/min. Energy yields vary only slightly with input voltage and flow rate. Hydrogen yields show little dependence on CO₂/CH₄ concentrations, but energy yields are approximately five times greater for the 5.0% mixture than the 1.1% mixture. Selectivities to H₂, CO, coke, and low molecular weight hydrocarbons were also evaluated and compared to data obtained without CO₂ in the feed. Hydrogen selectivities of nearly 100% were obtained, with small amounts of ethane and propane as the only observed side products and the selectivites were approximately the same whether CO₂ was present or absent in the mixture. However, the reaction proceeds much more cleanly when CO₂ is present, producing CO. The syngas product has an H₂ : CO ratio of 1.5 with the fan type reactor and 0.67 with the tubular reactor. In the absence of CO₂, coke is the main carbonaceous product. Under all conditions studied the fan type reactor demonstrated higher methane conversions (up to 11.9%) and selectivities to hydrogen.     

Stereochemistry and mechanism of catalytic hydrogenation of substituted cyclohexanones

Substituted alkylcyclohexanones were hydrogenated over several transition metal catalysts. The hydrogenation with freshly prepared Raney Ni gave predominantly the axial alcohols but catalyst to which sodium hydroxide was added or aged catalyst increased the stereoselectivity. In contrast to the PtO₂ hydrogenation in which the equatorial alcohols were favoured, more axial alcohols were obtained than the equatorial counterparts on Pt-black. On Pd catalyst the isomeric ratios of the cyclohexanols changed as the reaction progressed. This may be due to a decrease in the amount of hydrogen available caused by the strong adsorption of ketones on the catalyst. Rh catalyst gave more of the axial alcohols than any other catalyst used in the present study.     

Distributed computing and NMR constraint-based high-resolution structure determination: applied for bioactive Peptide endothelin-1 to determine C-terminal folding

Distributed computing has been implemented to the solution structure determination of endothelin-1 to evaluate efficiency of the method for NMR constraint-based structure calculations. A key target of the investigation was determination of the C-terminal folding of the peptide, which had been dispersed in previous studies of NMR, despite its pharmacological significances. With use of tens of thousands of random initial structures to explore the conformational space comprehensively, we determined high-resolution structures with good convergences of C-terminal as well as previously defined N-terminal structures. The previous studies had missed the C-terminal convergence because of initial structure dependencies trapped in localized folding of the N-terminal region, which are strongly constricted by two disulfide bonds.     

羟基羧酸钛(Ⅲ)配合物的合成和热性质研究

三氯化钛分别与苹果酸铵、酒石酸铵和柠檬酸铵反应，制得三种新的固态配合物：苹果酸羟基钛(Ⅲ)、酒石酸羟基钛(Ⅲ)和柠檬酸钛(Ⅲ)(化学式分别为Ti(OH)(C₄H₄O₅)·1.5H₂O、Ti(OH)(C₄H₄O₆)·1.5H₂O和Ti(C₆H₅O₇)·1.5H     

4,7‐Diiodo‐2,1,3‐benzothiadiazole and 7,7′‐diiodo‐4,4′‐bi(2,1,3‐benzothiadiazole)

In the crystal structures of the title compounds, C₆H₂I₂N₂S, (I), and C₁₂H₄I₂N₄S₂, (II), respectively, a large number of short inter‐heteroatom contacts, such as S?N, I?I and N?I, are observed. In (II), which is non‐centrosymmetric, two halves of the mol­ecule are related by a crystallographic twofold axis.     

Asymmetric induction copolymerization. Cationic copolymerization of l-menthyl vinyl ether with indene and acenaphthylene

l-Menthyl vinyl ether (l-MVE) was homopolymerized and copolymerized with the monomers indene (IN) and acenaphthylene (ANp) by BF₃OEt₂ as a catalyst. The chiral menthyl substituent was cloven from the homopolymers and copolymers using dry-hydrogen bromide gas. After the removal of optically active menthyl group, poly(vinyl alcohol) (PVA) from l-MVE homopolymer was optically inactive, and copolymers (VA-IN, VA-ANp) from l-MVE-IN and l-MVE-ANp copolymers were still optically active. Hence, in the case of l-MVE homopolymer, it was concluded that asymmetric induction in the polymer main chain can only produce pseudoasymmetry. In the case of l-MVE-IN and l-MVE-ANp copolymers, it was found that asymmetric induction proceeded in the copolymer main chain and was caused by the influence of chiral menthyl group.     

Asymmetric induction radical copolymerization of optically active l-menthyl vinyl ether with vinylene carbonate and indene

The copolymerizations of l-menthyl vinyl ether (l-MVE) with the monomers vinylene carbonate (VCA) and indene (IN) were carried out in benzene with azobisisobutyronitrile (AIBN) as an initiator to obtain optically active copolymers. The optically active l-menthyl residue from the copolymer main chain was removed using dry hydrogen bromide gas. After the ether cleavage reaction, the copolymers prepared (VA–VCA and VA–IN) were still optically active, and hence it was found that asymmetric induction had taken place in the copolymer main chain. The optical rotatory dispersion (ORD) and circular dichroism (CD) data of the original and ether-cloven copolymers were also determined.     

Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.