Calorimetric study of molecular superconductor κ-(BEDT-TTF)<Subscript>2</Subscript>Ag(CN)<Subscript>2</Subscript>H<Subscript>2</Subscript>O which contains water in the anion layers

Thermodynamic investigation of an organic superconductor κ-(BEDT-TTF)₂Ag(CN)₂H₂O in which the BEDT-TTF dimers are arranged in the κ-type structure in the donor layers is performed by the relaxation calorimetric technique at low temperatures and under magnetic fields. A thermal anomaly related to the superconductive phase transition was observed at 5 K. The existence of residual γ^* in the superconductive state is about 18% of the normal state γ value, which is larger than those of κ-(BEDT-TTF)₂Cu(NCS)₂, and κ-(BEDT-TTF)₂Cu[N(CN)₂]Br salt. The lattice heat capacity reflected on the β-term in the low-temperature heat capacity was found to be affected by the cooling rate. The disorder produced in the network structure constructed by hydrogen bond in the insulating layer is considered to give low-energy phonon excitations reflected in the heat capacity.     

Fabrication of novel layer-by-layer assembly films composed of poly(lactic acid) and polylysine through cation-dipole interactions

Novel layer-by-layer (LbL) assembly films composed of poly( L-lysine) (PLL) and poly( D-lactic acid) (PDLA) were prepared by the alternate immersion of a gold substrate into an aqueous PLL solution and an acetonitrile solution of PDLA. The formation of the LbL assembly film was confirmed by quartz crystal microbalance (QCM) analysis, atomic force microscopy observation, and attenuated total reflection Fourier transform infrared spectroscopy measurement. The driving force responsible for the LbL assembly was determined by investigating the formation behavior of the LbL assembly under various conditions. The formation of the LbL assembly was not affected either by the stereochemistry of polylysine and poly(lactic acid) or by the addition of urea, which is known to inhibit hydrogen bonding interaction between polymers, into the aqueous PLL solution. The LbL assembly was also formed by the combination of PDLA and polycations other than polylysine, such as poly(diallyldimethylammonium chloride). On the other hand, the combination of PDLA and any polyanions such as poly(styrene sulfonate sodium salt) produced little corresponding LbL assembly. The increase in positive charge on the amino nitrogen atom of PLL enhanced the LbL assembly. These results suggest that the LbL assembly film composed of PLL and PDLA was fabricated by cation-dipole interactions between the positive charge on the amino nitrogen atom of PLL and the lone pairs of the carbonyl oxygen atom of PDLA.     

A theoretical study of the dehydration and the dehydrogenation processes of alcohols on metal oxides using MOPAC

Using a semi-empirical molecular orbital method, PM3, and 2-propanol as an example, the dehydration and the dehydrogenation processes of alcohol on oxide catalysts were studied. The catalysts addressed here were four kinds of oxides (Al₂O₃, SiO₂, ZnO, CdO) whose reaction selectivities had been experimentally determined. The usual models consisting of a surface metal ion, several oxide ions and an isopropoxy group were used in calculations. For the dehydration, heats of formation of the models were calculated at each point of the process where the distance between a β-hydrogen of the group and a basic site (i.e. oxygen of the group or a surface oxide ion) or a metal ion was gradually shortened, or where the length of the C–O bond of the group was gradually increased. A reasonable dehydration mechanism was estimated by comparing activation energies calculated from the transitions of the heats of formation. The most probable dehydrogenation mechanism was also estimated in a similar way by gradually making an -hydrogen close to a surface oxide ion, the metal ion or a surface proton. It was concluded that the dehydration proceeds by scission of the C–O bond of the group after its oxygen was attacked by some electrophile on the surface and that the dehydrogenation proceeds by a mechanism in which an -hydrogen of the group was extracted by the metal ion.

Based on the dehydration mechanism thus deduced, alkoxy groups generated by adsorption of the primary, secondary and tertiary alcohols on SiO₂ were calculated in order to estimate the activation energies of their decompositions. In result, the order of the energies was found to be in good agreement with that of the decomposition rates experimentally determined by Kitahara. This agreement gives support to the validity of the mechanism deduced for the dehydration of alcohol.     

Chiral resolution of monosaccharides as 1-phenyl-3-methyl-5-pyrazolone derivatives by ligand-exchange CE using borate anion as a central ion of the chiral selector

Six reducing monosaccharides (mannose, galactose, fucose, glucose, xylose, and arabinose) were derivatized with 1-phenyl-3-methyl-5-pyrazolone (PMP) and chiral resolution of these racemic PMP-monosaccharides was studied by ligand-exchange CE using borate anion as a central ion of the chiral selector and (S)-3-amino-1,2-propanediol (SAP) as a chiral selector ligand. PMP-mannose, PMP-galactose and PMP-fucose were successfully enantioseparated. Lowering the capillary temperature increased the resolution of PMP-mannose system, but decreased that of PMP-galactose and PMP-fucose systems. Whereas the maximum resolution was obtained at pH 8.9 in the PMP-mannose system, resolution increased gradually with pH in the PMP-galactose and PMP-fucose systems. Expecting the formation of the ternary borate complexes with SAP and PMP-monosaccharide in the CE experiments, the optimized structures of the borate diastereomers were obtained by semiempirical molecular orbital calculations to discuss the structural difference of the diastereomers in connection with the enantioseparation behaviors.     

Accelerated electrocyclic ring-opening of benzocyclobutenes under the influence of a beta-silicon atom

A significant acceleration effect of a beta-silicon atom was observed on the electrocyclic ring-opening reaction of benzocyclobutene derivatives to form o-quinodimethanes. This acceleration effect could be attributed to an electronic sigma-donating nature of the C(alpha)-Si(beta) bond, associated with alpha-anion driven pericyclic reactions.     

Linear hydrogen‐bonded molecular tapes in the cocrystals of squaric acid with 4,4′‐dipyridylacetylene and 1,2‐bis(4‐pyridyl)ethylene

The title compounds, 4,4′‐(ethyne‐1,2‐diyl)­dipyridinium bis(squarate), C₁₂H₁₀N₂²⁺·2C₄HO₄^?, and 4,4′‐(ethene‐1,2‐diyl)­dipyridinium bis­(squarate), C₁₂H₁₂N₂²⁺·2C₄HO₄^?, are isomorphous and crystallize in space group P. The cocrystals contain linear hydrogen‐bonded molecular tape structures along the [120] direction. The squarate monoanions form a ten‐membered dimer linked by two intermolecular O—H?O hydrogen bonds. Each component mol­ecule forms a segregated stack along the c axis. The bond lengths of the squarate monoanion indicate delocalization of the enolate anion.     

A synchrotron X‐ray study of triclinic LiCa2Nb3O10 with perovskite‐type slabs

The triclinic superstructure of a small crystal of LiCa₂Nb₃O₁₀, lithium dicalcium triniobium decaoxide, has been investigated by synchrotron X‐ray diffraction. The unit cell is an almost rectangular parallelepiped, although there is a 0.245° offset from orthogonality for β. The structure essentially belongs to a homologous series of Li[Na_n?3Ca₂Nb_nO_3n+1] with n = 3, where the moiety in square brackets has a perovskite‐type slab structure. The superstructure has a doubled unit‐cell volume with respect to the tetragonal aristotype. The NbO₆ octahedra are rotated about axes parallel to [110] by approximately 10°. Adjacent slabs are connected by Li atoms and are geo­metrically related by 4₂ pseudosymmetry lying parallel to c . There are twice as many sites as Li atoms, providing a variation of population at these Li sites.     

Chiral zirconium catalysts using multidentate BINOL derivatives for catalytic enantioselective Mannich-type reactions; ligand optimization and approaches to elucidation of the catalyst structure

Catalytic enantioselective Mannich-type reactions of silicon enolates with aldimines were investigated using chiral zirconium catalysts prepared from Zr(O(t)Bu)(4), N-methylimidazole, and newly designed multidentate BINOL derivatives. These new multidentate BINOL ligands were designed on the basis of an assumed transition state structure of a chiral zirconium catalyst derived from two molecules of (R)-6,6'-Br(2)-BINOL. Not only tetradentate BINOL 4 but also tridentate BINOL derivatives were found to be effective, and high enantioselectivities were attained. In a structural study of the most effective zirconium complex prepared from tridentate ligand 6e, several NMR experiments and DFT calculations were carried out. Consequently, the structure of an active catalyst and plausible mechanism of asymmetric induction were elucidated.     

Efficient approach to 1,2-diazepines via formal diazomethylene insertion into the C-C bond of cyclobutenones

Efficient monocyclic 1,2-diazepine formation via a tandem electrocyclization reaction of cyclobutenones with lithiodiazoacetate is demonstrated. The reaction proceeds through an oxy anion-accelerated 4π-ring opening of cyclobutene followed by an 8π-ring closure of the resultant oxy anion-substituted diazo-diene under mild conditions to furnish a 1,2-diazepine via formal diazomethylene insertion into the C-C bond of cyclobutenone.     

Synthetic studies on chartelline C: stereoselective construction of the core skeleton

What a core-ker! The title synthesis was achieved using a route featuring an intramolecular Mitsunobu reaction of a nosyl amide, stereoselective construction of the β-lactam, and formation of an enamide moiety by selenoxide elimination. The stereochemistry of the alkylation for the formation of the β-lactam was controlled by a secondary hydroxy group on the ten-membered ring. SEM=2-(trimethylsilyl)ethoxymethyl; TBS=tert-butyldimethylsilyl.