Visual observation of contact-induced intercrystalline migration of aromatic species adsorbed in zeolites by fluorescence microscopy.

Intercrystalline migration and a migration-assisted chemical reaction of adsorbed aromatic species between zeolite particles in physical contact were visualized by fluorescence microscopy coupled with a particle manipulation technique. The luminescence color characteristics of particular zeolite particles originating from the specific photochemistry of adsorbed species was exploited to follow the migration of the molecules. Two examples are shown that are relevant to the visualization of the time-dependent migration process: A one guest-two sets of zeolite crystals system: chrysene (Chry)-loaded zeolite Na+ -X (the sodium form of zeolite X) crystals were placed in contact with unloaded Tl+ -X (thallium-exchanged X) crystals and allowed to stand at room temperature. Initially, the blue fluorescence of Chry was detected only from the Na+ -X particles, but later, the development of green phosphorescence emission was discernible from the Tl+ -X which suggests that Chry migrated from the Na+ -X to the Tl+ -X crystals. A two guest-species systems: Electron-donating Chry-loaded Na+ -X crystals were placed in contact with electron-accepting 1,2,4,5-tetracyanobenzene (TCNB)-loaded Na+ -X or Na+ -Y crystals. With time, the former system (Chry/Na+ -X and TCNB/Na+ -X) gave rise to the emission of Chry-TCNB charge-transfer complexes resulting mainly from the migration of Chry while the latter system (Chry/Na+ -X and TCNB/Na+ -Y) afforded the same emission resulting largely from the migration of TCNB. The present investigation reveals that there is a certain direction for guest migration depending on the zeolite host and the nature of host-guest or guest-guest interaction.     

Reactivity and catalytic activity of cationic lonomers for the nucleophilic substitution reactions

Polystyrene-based crosslinked cationic ionomers containing ammonium or phosphonium chlorides (AxRCI and PxBuCI) were reacted with decyl methanesulfonate. The kinetic data were correlated with the swelling behavior of the ionomers and the solution viscosity of the corresponding linear ionomers. The reactivity of the ionomers was independent of the particle size of the ionomer beads, indicating no diffusion control of the reaction. The solvent and the ion content of the ionomers greatly affect the reactivity. In nonpolar solvents with a low acceptor number, A_N, such as toluene, the aggregation of ionic groups with an increasing ion content reduces the reactivity. A solvent with a high value of A_N, such as chloroform, led a very low reactivity independent of the ion content. Aprotic polar solvent, such as acetonitrila, promoted the dissociation of the ionic groups and furnished a relatively high reactivity independent of the ion content. Several catalytic substitution reactions were carried out under liquid-solid-solid triphase conditions. The kinetic results were accounted for in terms of slow nucleophile transport and fast chemical reaction within the ionomer particles. © 1994 John Wiley & Sons, Inc.     

ξ-potential and surface dye-ability of poly(vinyl alcohol) fiber with different degree of formalization in a cationic dye solution

Summary The surface dyeability of the poly(vinyl alcohol) fiber with different degree of formalization was studied by measuring -potential of the fiber in alkaline aqueous solutions (pH 10) of a cationic dye Methylene Blue. With the increase in the dye concentration, the sign of the -potential of the fiber changed from negative to positive and thereafter the positive value approximated to saturated value, and the amount of dye adsorbed (expressed in mol/cm²-fiber) increased also. These results may possibly be attributed to the formation of the electrostatic bond between the fiber and the dye. The linear relations were found between and logC _d and its slope did not change with rise of temperature. The free energy of dyeing G (negative) calculated from the slope of the -logC _id curve, etc. increased with increasing the degree of formalization of the fiber. This fact corresponds to the increase in the surface dye adsorption with increasing the degree of formalization. With increasing the degree of formalization, the heat of dyeing H (negative) increased and the entropy of dyeing S (positive) decreased. The positive value of S for each fiber, suggests the formation of hydrophobic bond as a driving force to the dyeing of Methylene blue on the fiber surface in addition to the electrostatic bond.This paper is Part XXVII in a series on Studies on -potentials and Surface Dyeability of Natural and Synthetic Fibers in Dye Solution. Part XXVI: T. Suzawa andK. Kawakami, Nippon Kagaku Kaishi1975, No. 7,1134.     

Chiral zirconium catalysts using multidentate BINOL derivatives for catalytic enantioselective Mannich-type reactions; ligand optimization and approaches to elucidation of the catalyst structure

Catalytic enantioselective Mannich-type reactions of silicon enolates with aldimines were investigated using chiral zirconium catalysts prepared from Zr(O(t)Bu)(4), N-methylimidazole, and newly designed multidentate BINOL derivatives. These new multidentate BINOL ligands were designed on the basis of an assumed transition state structure of a chiral zirconium catalyst derived from two molecules of (R)-6,6'-Br(2)-BINOL. Not only tetradentate BINOL 4 but also tridentate BINOL derivatives were found to be effective, and high enantioselectivities were attained. In a structural study of the most effective zirconium complex prepared from tridentate ligand 6e, several NMR experiments and DFT calculations were carried out. Consequently, the structure of an active catalyst and plausible mechanism of asymmetric induction were elucidated.     

Enantioselective ester synthesis in the presence of optically active polymers

Enantiomer-differentiating ester syntheses from acid salts, chlorides, and an anhydride were studied in the presence of optically active polyamines. Enantiomer selection occurred in reactions of a racemic salt with an achiral alkyl bromide and vice versa, which is good evidence of the importance of activation of the carboxylate group by complexation of the counterion and activation of alkyl bromide by the formation of a quaternary salt with polyamine under solid–liquid, phase-transfer reaction conditions. Only small optical activity was observed in the products of acid anhydride or chloride with alcohol.     

Convenient synthetic routes to α-oligosiloxanylacrylonitriles

Novel 1,4-elimination reaction of C,N-bis(trimethylsilyl)-C- trimethylsiloxymethylketenimine and retro Diels-Alder reaction of 2-oligosiloxanyl-5-norbornene-2-carbonitrile cleanly gave α-oligosiloxanylacrylonitriles in excellent yield.     

Calculations on the competition between association and reaction for C3H(+) + H2

A potential energy surface has been calculated for the competing associative and reactive ion-molecule processes involving the reactants C3H(+) + H2. Our ab initio results show that the linear ion C3H+ and H2 can directly access the deep potential well of the propargyl ion H2CCCH+, which is calculated to lie 390 kJ mol-1 below the zero-point energy of the reactants. Isomerization between the propargyl ion and the lower energy, cyclic C3H3+ ion, calculated to lie 501 kJ mol-1 below the zero-point energy of reactants, can subsequently occur via two pathways. One of these pathways involves a transition state lying 22 kJ mol-1 below the energy of the reactants while the other, which occurs at much lower energies, involves two transition states and an intermediate. The dissociation of c-C3H3+ into c-C3H2(+) + H is calculated to occur directly, without any intermediate potential energy maximum, but the energy of the products lies 7.3 kJ mol-1 above the energy of the reactants. Using the minimum energy potential pathway and properties of the stationary point structures determined via ab initio methods, we have calculated both the association rate coefficient to produce C3H3+ as a function of density and the branching ratio between the propargyl and cyclic structures of the ion. Our results are in good agreement with some experimental results and in conflict with others. Specifically, we agree with the 1:1 branching ratio measured for the propargyl and cyclic isomers of C3H3+ at 80 and 300 K and we agree with the rate coefficient for radiative association measured at 80 K. We cannot reproduce reported measurements that the reactive channel (C3H2(+) + H) is the dominant channel at 80 K and at low gas densities, or that the association channel at high densities saturates at an effective rate coefficient well below the Langevin value -2x10(-11) cm3 s-1 at 300K and 1x10(-10) cm3 s-1 at 80K.     

Search for a simpler synthetic model system for intramolecular 1,3-dipolar cycloaddition to the 5,6-double bond of a pyrimidine nucleoside

In search for a simpler model system for the study of intramolecular thermal reactions between the base and 5'-functionalized sugar moiety in nucleosides, 1-(3-azidopropyl)uracil (2), 1-(4-azidobutyl) pyrimidines (12 and 13) and 1-(5-azidopentyl)-uracil (14) was synthesized through the corresponding ω-benzoyloxy-(6,7 and 8) and ω-hydroxyalkyl-pyrimidines (9,10 and 11). Heating 2 gave 1,N⁶-trimethylene-6-aminouracil (4), while heating 12 and 13 gave N¹-C₆ cleaved addition products. 15 and 16, respectively. 15 was regiospecifically transformed to 1,2,3-triazole derivatives, 17,18 and 19. Heating 1-(4-azidobutyl)-5-bromouracil (20) yielded 3,9-tetramethylene-8-azaxanthine (22). 9 with NBA gave 1,0⁶-tetramethylene-5-bromo-6-hydroxy-5,6-dihydrouracil (24) and the 5-brominated analog of 9 (25). The 4-functionalized butyl side chain proved to serve as a substitute for the 5'-functionalized sugar moiety in pyrimidine ribonucleosides.     

Theoretical study of molecular conduction: I. Effective Green's function based on perturbation theory

There have been many experimental and theoretical studies on molecular conduction, as it is a fundamental parameter in the study of molecular‐scale electronics. We have investigated the features of molecular conduction using a Green's function method, which has often been used to solve problems in quantum transport and is also effective in elucidating electron transport in molecules. We have obtained the novel effective Green's functions, including the first‐order energy corrections, by accommodating the self‐energy of the electrodes as perturbation terms. Although these approximate Green's functions only provide information on the first‐order energy corrections, they can involve the elementary properties of molecular conduction. We propose a scheme for the analysis of the relations between molecular orbitals and their roles in molecular conduction and present analytical calculations for normal and cyclic polyenes. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Modification of poly(vinyl chloride). XIII. Crosslinking of poly(vinyl chloride) with dithiols and properties of the crosslinked products

PVC was crosslinked by immersing PVC–dithiol blends in ethylenediamine at 30°C. Properties of the products depended on the chain length and chemical structure of the crosslinkage and on the molecular weight of the polymer chain between crosslinks M_c. Crosslinking by the agent of soft structure and long molecular chain resulted in high tensile strength at break and impact strength and low brittle temperature. The use of the crosslinking agent of short molecular chain gave high yield strength, Young's modulus, and heat distortion temperature. The relation of M_c and the chemical structure of the crosslinks to the properties of the crosslinked rigid polymer was discussed in regard to the crosslinking effect and plasticizing effect.