Single-step sol-gel deposition and dielectric properties of 0.4 μm thick, (001) oriented Pb(Zr,Ti)O<Subscript>3</Subscript> thin films

Single-step sol–gel deposition was attempted for realizing submicron thick, (001) oriented Pb(Zr_0.53Ti_0.47)O₃ (PZT) thin films, using an alkoxide solution containing polyvinylpyrrolidone (PVP). A solution of molar composition, Pb(NO₃)₂:Zr(OC₃H₇ ⁿ)₄:Ti(OC₃H₇ ⁱ)₄:PVP:H₂O:CH₃COCH₂COCH₃:CH₃OC₂H₄OH:C₃H₇ ⁿOH = 1.1:0.53:0.47:0.5:5:0.5:22:0.98, was prepared as a coating solution. Gel films were prepared on Pt(111)/TiO₂/SiO₂/Si(100) substrates by spin-coating, and calcined at 350 °C and annealed at 650 °C either in an electric furnace or in a near-infrared (IR) furnace. When calcined in the near-IR furnace, the films became (001) oriented on annealing. When calcined in the electric furnace, on the other hand, the films became randomly oriented on annealing. These observations indicate that the heating the gel films from the substrate side in the calcination step at 350 °C induces crystallographic orientation in the annealing step at 650 °C. The effects of the heating methods on the thermal decomposition of the gel films, and the microstructure and dielectric properties of the fired films were studied. Finally 0.4 μm thick, (001) oriented PZT films could be successfully prepared by non-repetitive, single-step deposition. The oriented film thus obtained had the remnant polarization 2P _r of 39 μC/cm² and the dielectric constant ε′ of 960 ± 169.     

Preparation of composite monoliths of quaternized chitosan and diatom earth for protein separation

In this study, composite monoliths with porous structures were prepared using quaternized chitosan and diatom earth for protein separation. Quaternized chitosan (N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride) dissolved in water was mixed with diatom earth and crosslinked with glutaraldehyde under low-temperature conditions to form a cryogel. Interconnected porous monoliths were obtained after removing ice crystals from the cryogel. The monoliths adsorbed bovine serum albumin selectively from the solution mixture of bovine serum albumin and bovine ɤ-globulin, and bovine ɤ-globulin was recovered in the flow-through fraction. The adsorption selectivity was enhanced by changing the solution pH from 6.8 to 5.5. The adsorption of bovine serum albumin by the monolith was replicated at least five times following its washing with a buffer containing 400 mM NaCl and subsequent regeneration with a 10 mM acetate buffer. The composited monolith is a promising adsorbent for the removal of acidic proteins, such as serum albumin contamination in neutral proteins, for example, ɤ-globulins, in bioproduction processes.     

A study on the synthesis of calix[4 and 6]arenes using alternately arranged phloroglucinols and p-tert-butylphenols

A method for the synthesis of calix[4 and 6]arenes with two or three alternately arranged phloroglucinols and p-tert-butylphenols was studied using "3+1" and "5+1" approaches, compared to a simple one-pot synthesis based on a "1+1" approach. By using Yb(OTf)3 as a catalyst, each calix[4 and 6]arenes was afforded, in an overall yield of 20.7% and 11.8% in the "3+1" and "5+1" approaches, respectively, and 24.6% and 19.9% using a "1+1" approach with chlorobenzene and toluene as refluxing solvents, respectively.     

Relative rotational motion between alpha-Cyclodextrin Derivatives and a stiff axle molecule

Novel [2]rotaxanes bearing alpha-cyclodextrin (alpha-CD) derivatives and a diphenylacetylene axis molecule with trinitrobenzene as a bulky stopper have been prepared to investigate the relative rotary movement of a ring relative to an axis molecule and that of an axis molecule in a ring by NMR techniques. [2]Rotaxanes 2 and 3 were composed of alpha-CD derivatives (2: 6-phenyl-amide-alpha-CD; 3: 6-stilbene-amide-alpha-CD). The protons of alpha-CDs in rotaxanes were thoroughly assigned by the two-dimensional NMR techniques (TOCSY, COSY, ROESY, HMQC, and HMBC). The protons of alpha-CD in rotaxane 1 did not show splitting, whereas the resonance peak shifts and splitting for the corresponding protons of alpha-CD derivatives in rotaxanes 2 and 3 were observed by the shielding and deshielding effects from a diphenylacetylene axis molecule. The splitting of resonance peaks was closely related to the rotary movements of alpha-CDs and an axis molecule. We supposed that alpha-CD in rotaxane 1 rotates freely around a diphenylacetylene axis molecule, and vice versa, whereas the rotary movement of alpha-CD derivatives and the axis molecules of rotaxanes 2 and 3 were restricted by the steric repulsion between the substituent group of alpha-CD and the stopper group of an axis molecule. To estimate the relative rotary movement of CDs and an axis molecule in rotaxanes, the rotational correlation time (tauc) of rotaxanes was measured by 13C NMR. The results indicate that the corresponding rotary movement of the modified alpha-CD and the axis molecules in rotaxanes 2 and 3 depends on the size of the substituent group.     

Mechanism of water photooxidation reaction at atomically flat TiO2 (rutile) (110) and (100) surfaces: dependence on solution pH

The mechanism of water photooxidation reaction at atomically flat n-TiO(2) (rutile) surfaces was investigated in aqueous solutions of various pH values, using photoluminescence (PL) measurements. The PL bands, which peaked at around 810 and 840 nm for the (110) and (100) surfaces, respectively, were assigned to radiative transitions between conduction-band electrons and surface-trapped holes (STH), [Ti-O=Ti(2)](s)+, formed at triply coordinated (normal) O atoms at the surface lattice. The PL intensity (I(PL)) decreased stepwise with increasing solution pH, namely, it sharply decreased at around pH 4, near the point of zero charge of TiO(2) (about 5), and then rapidly decreased to zero near pH 13. The first sharp decrease around pH 4 is attributed to the increased rate of nucleophilic attack of a water molecule to a hole at a site of surface bridging oxygen (Ti-O-Ti), the density of which increases with increasing pH. The nucleophilic attack is regarded as the main initiating step of the water oxidation reaction in low and intermediate pH. The high PL intensity at low pH is ascribed to slow nucleophilic attack owing to a very low density of Ti-O-Ti by its protonation at the low pH. The second sharp decrease near pH 13 is attributed to formation of surface anionic species like Ti-O- which can be readily oxidized by photogenerated holes. Interrelations between reaction intermediates proposed in this work and those reported by time-resolved laser spectroscopy are discussed.     

New glycosides from the rhizomes of Tacca chantrieri

Five new glycosides, which are classified into two bisdesmosidic pseudofurostanol glycosides (1, 2), two new ergostanol glycosides (3, 4), and a new phenolic glycoside (5), were isolated from the rhizomes of Tacca chantrieri. The structures of 1-5 were determined on the basis of extensive spectroscopic analysis, including that of two-dimensional (2D) NMR data, as well as hydrolytic cleavage followed by spectroscopic and chromatographic analyses.     

Synthesis of gamma-hydroxybutenolides applying crossed aldol condensation in the presence of a bulky lewis acid and their anti-tumor activity

An improved synthesis of gamma-hydroxybutenolides 1a-d was achieved via crossed aldol condensation between aldehydes 2a-d and the protected gamma-hydroxy-beta-methylbutenolides 3 or 4 using the bulky Lewis acid, aluminum tris(2,6-diphenylphenoxide) (ATPH). Using this same methodology, the gamma-hydroxybutenolides 17a-d having various heteroaromatic rings were synthesized and their anti-tumor activities were evaluated.     

Charge current driven by spin dynamics in disordered Rashba spin-orbit system

Pumping of charge current by spin dynamics in the presence of the Rashba spin-orbit interaction is theoretically studied. Considering a disordered electron, the exchange coupling and spin-orbit interactions are treated perturbatively. It is found that the dominant current induced by spin dynamics is interpreted as a consequence of the conversion from spin current via the inverse spin Hall effect. We also find that the current has an additional component from a fictitious conservative field. The results are applied to the case of a moving domain wall.