Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.     

Problems associated with interferences in the analysis of serum for polychlorinated biphenyls

During a recent survey to determine serum concentrations of polychlorinated biphenyls (PCBs) among people living around New Bedford, MA, U.S.A., an unidentified contaminant precluded the quantification of some early eluting Webb and McCall peaks. Loss of data is estimated to have reduced reported serum levels by 12%. Efforts to identify the contaminant by gas chromatography with an electron-capture detector, a Hall electrolytic condutivity detector, and mass spectrometer were not successful. Researchers ascertained, however, that the contaminant is not a PCB, it does not contain halogens, but it may contain phthalates. Vacutainer tubes and closures for serum storage bottles are suspected sources of contamination.     

Arc Discharge in a Channel with Transparent Walls at Intense Flow Rates of a Plasma Forming Gas

The arc discharge was studied in a transparent channel at an intense flow rate of nitrogen, hydrogen, air, carbon dioxide in the current range 100–1500 A. The internal diameter of the porous channel varied from 10 to 34 mm, the length - from 50 to 150 mm, the air and nitrogen flow rates - from 0.05 to 1.5 kg/s, hydrogen - from 0.005 to 0.05 kg/s. The electric field strength in the arc channel reached a value of 300 V/cm for N₂ and 500 V/cm for H₂. The effect of plasma thermochemical non-equilibrium was discovered.     

The influence of photodissociated N2O in pulsed-laser deposition of Y-Ba-Cu-O films

Pulsed-laser deposition of YBa₂Cu₃O₇ in N₂O permits lowering of the substrate temperature with respect to deposition in O₂ atmosphere. Additional photodissociation of N₂O near the substrate surface deteriorates the superconducting properties of deposited films.On leave from: Institute of Applied Physics of the Academy of Sciences of the USSR, SU-603600 Nishni Nowgorod, USSR     

Photolysis of 2-dialkylamino-3-methyl-1,4-naphthoquinones

The photolysis of 2-dialkylamino-1,4-naphthoquinones is significantly more efficient when a methyl group is at C³. The quantum yields are 2–6 times greater than for 2-dialkylaminonaphthoquinones lacking a methyl group. 2-Monoalkyl-amino-1,4-naphthoquinones also undergo photochemical dealkylation.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2387–2392, October, 1991.     

Band structures in73Se

Excited states of⁷³Se have been investigated up to spin, 21/2 using techniques of in-beamγ-ray spectroscopy in connection with the⁷⁰Ge(α, n) reaction. Mean lifetimes of 12 levels have been determined applying Doppler-shift andγ-RF-methods. Five different bands have been identified that reflect a variety of different excitation modes. The decoupled 9/2⁺ band is likely to correspond to an oblate deformation while the 5/2⁺ band is interpreted as a strongly coupled prolate band built on the Nilsson configuration [422] 5/2⁺. The 3/2^? band is a strongly coupled band built on the [301] 3/2^} configuration.Nuclear reactions:⁷⁰Ge(α,n),E=14, 16, 18, 19, 20MeV; measuredE _γ,I _γ,σ(E _γ,θ),γγ-coin, linear polarization, DSA,γ(t).⁷⁵Se deduced levels,I, π, τ, δ(E2/M1), B(σλ). Enriched targets, Ge detectors.     

Optical waveguide analysis using modified Airy functions

We review a little-used but powerful method of solving the scalar wave equation. It uses a modification of the well-known Airy functions, which are easily calculated on desktop computers. The techniques are reminiscent of the WKBJ methodology, but the solution, although approximate, is much more useful than the traditional WKBJ solution and can be used with almost as much ease. Re method is extremely powerful but, to our knowledge, is not used in the optics community. It is useful in analyzing integrated optical waveguide components.     

Serial magnetic resonance imaging in patients following acute myocardial infarction.

The detection of serial changes in magnetic resonance (MR) signal intensity of the heart following acute myocardial infarction may provide a useful method of characterizing tissue healing. Fourteen patients with acute Q-wave infarction underwent T2-weighted, spin-echo cardiac imaging during hospitalization, followed by one or more additional MR studies (total 31) over a 6- to 27-wk period (mean: 3 mo). Visual assessment of the images demonstrated a gradual reduction in signal intensity and localization of the bright signal to the subendocardium of the infarction region over the three-mo study period. A quantitative measurement of signal intensity (infarction/normal myocardium) fell from 1.81 +/- 0.42 on the initial study to 1.34 +/- 0.37 (p less than 0.05) at a mean of 14 wk. Two patients had an increase in signal intensity on the follow-up study and both patients had been readmitted with acute coronary syndromes. In summary, characterization of changes in signal intensity may provide a useful method of assessing myocardial healing following acute myocardial infarction. Further studies are indicated to determine the prognostic significance of these parameters.