Hydrogen-bonded networks in organic conductors: crystal structures and electronic properties of charge-transfer salts of tetracyanoquinodimethane with 4,4'-biimidazolium having multiprotonated States

[structure: see text] Novel hydrogen-bonded charge-transfer salts of TCNQ with mono- and diprotonated 4,4'-biimidazolium were synthesized in order to demonstrate the high potential of the 4,4'-biimidazole system in a molecular conductor from the viewpoint of crystal engineering and electronic modulation. Crystal structure analyses of neutral 4,4'-biimidazole and TCNQ salts revealed the formation of two types of hydrogen-bonding modes of the 4,4'-biimidazole moiety depending on the protonated states. Neutral 4,4'-biimidazole possessed a linear chain mode of hydrogen-bonding to construct two-dimensional network. In the TCNQ salt of monoprotonated 4,4'-biimidazolium, the 4,4'-biimidazole moiety formed a dimer by a complementary mode of hydrogen-bonding. In contrast, the salt of diprotonated 4,4'-biimidazolium showed a double linear chain mode of hydrogen-bonding to construct a three-dimensional network. The formation of two types of hydrogen-bonding modes made the difference in the stacking patterns of TCNQ columns and in their transport properties. The TCNQ salt of diprotonated 4,4'-biimidazolium exhibited high electrical conductivity (sigma(rt) = 1.1 x 10(-1) S cm(-1)).     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

A novel thin-layer amperometric detector based on chemically modified ring-disc electrode and its application for simultaneous measurements of nitric oxide and nitrite in rat brain combined with in vivo microdialysis

A novel thin-layer amperometric detector (TLAD) based on chemically modified ring-disc electrode and its application for simultaneous measurements of nitric oxide (NO) and nitrite (NO₂⁻) in rat brain were demonstrated in this work. The ring-disc electrode was simultaneously sensitive to nitric oxide (NO) and nitrite (NO₂⁻) by modifying its inner disc with electropolymerized film of cobalt(II) tetraaminophthalocyanine (polyCoTAPc)/Nafion and its outer ring with poly(vinylpyridine) (PVP), respectively. The ring-disc electrode was used to constitute a novel TLAD in radial flow cell for simultaneous measurements of NO and NO₂⁻ in rat brain combined with techniques of high performance liquid chromatography (HPLC) and in vivo microdialysis. It was found that the basal concentration of NO in the caudate nucleus of rat brain is lower than 1.0×10⁻⁷ mol l⁻¹, NO₂⁻ concentration is 5.0×10⁻⁷ mol l⁻¹ and NO exists in brain maybe mainly in the form of its decomposed product.     

The practical synthesis of a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246)

The synthetic route for a uterine relaxant, bis(2-[[(2S)-2-([(2R)-2-hydroxy-2-[4-hydroxy-3-(2-hydroxyethyl)-phenyl]ethyl]amino)-1,2,3,4-tetrahydronaphthalen-7-yl]oxy]-N,N-dimethylacetamide) sulfate (KUR-1246), was established by the coupling of optically active components, the bromohydrin 14 and the amine 24. We now describe the practical synthesis of these two optically active components. Bromohydrin 14 was obtained by the asymmetric borane reduction of the prochiral phenacyl bromide 13 using a catalyst prepared from aluminum triethoxide and a chiral amino alcohol. The other optically active component 24 was prepared from (S)-AMT.     

Interpretation of structure formation during the sol-gel transition of a resorcinol-formaldehyde solution by population balance

Growth of colloidal particles formed during the sol-gel transition of a resorcinol-formaldehyde (RF) solution was simulated based on the population balance equation by using the discrete-sectional model (DSM). During the early stage of the sol-gel transition, the transient change of sizes of colloidal particles estimated by this method agreed well with the previous experimental observation by dynamic light scattering (DLS), which confirmed the influence of the catalyst concentration of a starting RF solution on the growth rate of the particles. From the size distribution of colloidal particles predicted at the gelation time, the surface area of a RF hydrogel after the completion of the sol-gel transition was estimated, which coincided with the BET surface area of a RF aerogel because the porous structure of a hydrogel was maintained and few micropores were formed during supercritical drying.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Asymmetric total syntheses of (+)-mycoepoxydiene and related natural product (-)-1893A: application of one-pot ring-opening/cross/ring-closing metathesis to construct their 9-oxabicyclo[4.2.1]nona-2,4-diene skeleton

The total syntheses of (+)-mycoepoxydiene and (-)-1893A have been completed. The present synthetic strategy features the use of one-pot ring-opening/cross metathesis (ROM/CM) followed by a ring-closing metathesis (RCM) reaction, allowing for the concise construction of the 9-oxabicyclo[4.2.1]nona-2,4-diene framework from a 7-oxabicyclo[2.2.1]hept-2-ene derivative and 1,3-butadiene. The sequential metathesis product was converted into (+)-mycoepoxydiene through the oxidative rearrangement of a furfuryl alcohol to a pyranone, thereby establishing its absolute stereochemistry. From the common intermediate, a structurally related natural product (-)-1893A was also synthesized via the vinylogous aldol reaction.     

Synthesis of poly(2,5-dimethylphenylene sulfide) through oxidative polymerization of sulfur chloride with p-xylene

Poly(2,5-dimethylphenylene sulfide) was prepared by oxidative polymerization of sulfur chloride with p-xylene using 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) as an oxidizing agent. The reaction proceeded efficiently under atmospheric pressure and at room temperature. The polymer formed had a high melting temperature and linear structure which was confirmed by spectroscopies. The effects of reaction time, solvent, temperature and oxidizing agent on polymerization are also discussed.     

Liquid crystalline gel with refractive index gradient of curdlan

Curdlan dissolved in aqueous sodium hydroxide was dialyzed to aqueous calcium chloride to form a gel. Transparent and turbid concentric layers observed in the gel cross section perpendicular to the long axis of the dialysis tube were identified as liquid crystalline gels with refractive index gradient and amorphous gels, respectively. The thickness of each layer was proportional to the diameter of the dialysis tube, and the gelation proceeded in proportion to the root of time. The unique pattern formation was attributed to the change of curdlan conformation and calcium-induced cross-linking resulting from a diffusion of calcium cations and hydroxide anions through the dialysis tube. It is suggested that the orderedness of the curdlan molecules decreases by the increase of the curvature of the concentric liquid crystal layers as the layer comes toward the center of the dialysis tube.