Remarkably enhanced capacitance of ordered polyaniline nanowires tailored by stepwise electrochemical deposition

A stepwise deposition method was employed to create ordered polyaniline (PANI) nanowires with remarkably enhanced capacitance. Cyclic voltammetry, AC impedance, and galvanostatic charge/discharge cycling were employed to investigate the electrochemical performance of the PANI electrodes. The PANI-deposited electrode exhibits much higher capacitance than those prepared by one-step deposition method, which were mainly contributed from the unique nano structure of PANI and the increased biological, economical, and technical surface areas. The superior capacitive behaviors of the nano PANI electrodes show great potential in preparation of high efficient electrochemical capacitors or rechargeable batteries.     

有机锗（Ge—132）对交警健康作用的研究

初步观察了给交警服用Ｇｅ－１３２的效果，表明Ｇｅ－１３２有一定保健作用。     

Photophysical properties of anthanthrene-based tunable blue emitters

Anthanthrene (1) derivatives substituted at the 4,10 and 6,12 positions (2-6) were synthesized as promising candidates for organic light emitting diodes (OLEDs). The emission of these compounds can be manipulated in the blue region (lambda(max) = 437-467 nm) through structural modifications. Photophysical and electrochemical properties (phi(F) = 0.20-0.47; tau(F) = 2.97-6.06 ns; HOMO-LUMO energy gap = 2.25-2.56 eV) as well as geometry optimized structures of 1-6 are reported.     

4—叔丁基—β—氯—α甲基肉桂醛的合成

从苯和叔丁醇出发，经过３步反应合成得标题化合物，总收率在６８％以上。     

电场对含高氯酸锂盐的互穿网络高分子快离子导体的电导的影响

研究了直流电场对含ＬｉＣｌＯ４的聚氧化乙烯（ＰＥＯ）４００与环氧树脂形成的液晶态互穿网络高分子忆禽子导体的电导率的影响。在室温至９０℃范围内，电导率随外加电压增加面降低。外加电压越高，对电导率变化的影响越大。     

Chemical constituents of Taraxacum formosanum

Three new compounds, taraxacine-A (1), taraxacine-B (2) and taraxafolin (3) together with twenty-five known compounds, which include two beta-carboline alkaloids, two indole alkaloids, two chlorophylls, two flavonoids, one coumarin, two triterpenoids, one monoterpenoid, one ionone, four steroids and eight benzenoids, were isolated and characterized from the fresh aerial parts of Taraxacum formosanum. Structures of new compounds were determined by spectral analysis.     

Gold nanoshells on polystyrene cores for control of surface plasmon resonance

A method is presented for synthesizing core-shell structures consisting of monodisperse polystyrene latex nanospheres as cores and gold nanoparticles as shells. Use of polystyrene spheres as the core in these structures is advantageous because they are readily available commercially in a wide range of sizes, and with dyes or other molecules doped into them. Gold nanoparticles, ranging in size from 1 to 20 nm, are prepared by reduction of a gold precursor with sodium citrate or tetrakis(hydroxymethyl)phosphonium chloride (THPC). Carboxylate-terminated polystyrene spheres are functionalized with 2-aminoethanethiol hydrochloride (AET), which forms a peptide bond with carboxylic acid groups on their surface, resulting in a thiol-terminated surface. Gold nanoparticles then bind to the thiol groups to provide up to about 50% coverage of the surface. These nanoparticles serve as seeds for growth of a continuous gold shell by reduction of additional gold precursor. The shell thickness and roughness can be controlled by the size of the nanoparticle seeds as well as by the process of their growth into a continuous shell. By variation of the relative sizes of the latex core and the thickness of the gold overlayer, the plasmon resonance of the nanoshell can be tuned to specific wavelengths across the visible and infrared range of the electromagnetic spectrum, for applications ranging from the construction of photonic crystals to biophotonics. The position and width of the plasmon resonance extinction peak are well-predicted by extended Mie scattering theory.     

显微共焦拉曼光谱研究电化学合成聚苯胺膜

显微共焦拉曼技术被用来研究电化学合成的聚苯胺（PANI）膜. 研究结果表明：在不同的激发光聚焦深度，聚苯胺膜的拉曼光谱有明显变化.从而反映出聚苯胺膜的掺杂程度在膜生长过程中随膜厚度的增长而增加. 并由X射线电子能谱（XPS）和紫外吸收光谱（UV）分析证实.     

Application of co-eluting structural analog internal standards for expanded linear dynamic range in liquid chromatography/electrospray mass spectrometry

Non-linear standard calibration curves occur frequently in liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS), necessitating the use of non-linear regression curve fitting or a reduction in assay dynamic range. Non-linearity can be minimized by the use of stable isotope internal standards, if the cause of curve bending is ionization saturation. Unfortunately, stable isotope internal standards can be difficult or expensive to synthesize. Structural analog internal standards, if sufficiently close to analytes both in chemical structures and HPLC retention times, may mimic the effect of stable isotope internal standards. Tentative experimental evidence supporting this concept is presented in this paper.     

Redox Polymerization of Methyl Methacrylate in the Fluorous Triphasic System

Fluorous-phase chemistry is currently a topic of considerable interest1-6. Since fluoroustriphasic reactions were first described by the Curran and co-workers7, this triphasicsystem has been widely used for detagging7,8 and phase-vanishing reactions9-11. …