Identification of Biomarker Volatile Organic Compounds Released by Three Stored-Grain Insect Pests in Wheat

Monitoring and early detection of stored-grain insect infestation is essential to implement timely and effective pest management decisions to protect stored grains. We report a reliable analytical procedure based on headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry (HS-SPME-GC-MS) to assess stored-grain infestation through the detection of volatile compounds emitted by insects. Four different fibre coatings were assessed; 85 µm CAR/PDMS had optimal efficiency in the extraction of analytes from wheat. The headspace profiles of volatile compounds produced by Tribolium castaneum (Herbst), Rhyzopertha dominica (Fabricius), and Sitophilus granarius (Linnaeus), either alone or with wheat, were compared with those of non-infested wheat grains. Qualitative analysis of chromatograms showed the presence of different volatile compound profiles in wheat with pest infestation compared with the wheat controls. Wheat-specific and insect-specific volatile compounds were identified, including the aggregation pheromones, dominicalure-1 and dominicalure-2, from R. dominica, and benzoquinones homologs from T. castaneum. For the first time, the presence of 3-hydroxy-2-butanone was reported from S. granarius, which might function as an alarm pheromone. These identified candidate biomarker compounds can be utilized in insect surveillance and monitoring in stored grain to safeguard our grain products in future.     

Determination of Polycyclic Aromatic Hydrocarbons in Traditional Chinese Medicine Raw Material,Extracts, and Health Food Products

The four polycyclic aromatic hydrocarbon markers (PAH4) of benzo[a]anthracene (BaA), chrysene (Chr), benzo[b]fluoranthene (BbF), and benzo[a]pyrene (BaP) are indicators showing polycyclic aromatic hydrocarbon (PAH) contamination levels in Chinese medicine raw materials (CMRMs), extracts and health food products; Samples of herbal medicine, herbal extracts, and food supplements were extracted with n-hexane, then cleaned up sequentially on Florisil and EUPAH solid-phase extraction (SPE) columns. A gas chromatography–mass spectrometry method for the determination of four polycyclic aromatic hydrocarbon markers in Chinese medicine raw material, extracts, and health food products was established; In spiked-recovery experiments, the average recovery was about 78.6–107.6% with a precision of 2.3–10.5%. The limit of quantification (LOQ) and limit of detection (LOD) of the PAH4 markers in this method were 2.0 μg/kg and 0.7 μg/kg, respectively. When the developed method was utilized to determine PAH4 contents in 12 locally available health food products, 3 samples contained over 10.0 μg/kg BaP, and 5 samples contained over 50.0 μg/kg PAH4. The European Union (EU) limits for BaP and PAH4 are 10 and 50.0 μg/kg, respectively; therefore, more attention must be drawn to the exposure risk of BaP and PAH4 in CMRMs, their extracts, and health food products. According to the risk assessment based on the Margin of Exposure (MOE) method, it is recognized that the products mentioned in this study pose a low risk.     

Ab initio calculations in a uniform magnetic field using periodic supercells

We present a formulation of ab initio electronic structure calculations in a finite magnetic field, which retains the simplicity and efficiency of techniques widely used in first principles molecular dynamics simulations, based on plane-wave basis sets and Fourier transforms. In addition we discuss results obtained with this method for the energy spectrum of interacting electrons in quantum wells, and for the electronic properties of dense fluid deuterium in a uniform magnetic field.     

应力对M-Z型InP/InGaAsP-EAM偏振

采用Agilent 81910A光子全参量测试仪,首次实验研究了InP/In1－xGaxAs1－yPy-MQW（Multiple-Quantum-Well,MQW）材料与衬底间因应力而产生的M-Z型光调制器的PDL影响以及由此引起的由差分群时延(Differential Group Delay,DGD)表征的偏振模色散(Polarization Mode Dispersion,PMD).研究结果表明,半导体MQW光调制器的PDL与DGD是一致的.因此在半导体光器件的制作过程中,应尽可能地减小衬底与波导芯层之间的因残存应力的存在造成对光器件的高速性能的不利影响.     

透过率起伏光谱分析法测粒技术

提出的透过率起伏光谱分析法是一种新的颗粒测量方法。采用一细小光束照射匀速流动的颗粒系统,通过采集透射光起伏信号,经统计处理得到透过率的平均值与起伏谱。通过求解逆问题,从透过率的起伏谱中得到颗粒粒径分布信息,再结合透过率的平均值得到颗粒的体积分数信息。给出了关于单层颗粒透过率的平均值与起伏谱的理论表达式,并推广到三维单分散和多分散的颗粒系统。对粒径在32~425μm内的稀薄颗粒系进行了部分实验测试和模拟计算,结果表明该方法可同时对颗粒粒径分布和体积分数进行有效测量。     

用锌有机源和CO2/H2混合气源PECVD沉积ZnO薄膜

在等离子体作用下,以CO2/H2混合气为氧源,Zn(C2H5)2锌为锌源,在单晶硅上生长出高度择优取向的氧化锌薄膜。X射线衍射分析表明,薄膜为六方结构,c轴高度择优;原子力显微镜观察到晶粒是有规律地按六方排布,薄膜的表面粗糙度较小;从光致发光谱还发现在380 nm处有非常强的紫外峰。     

聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

锥形透镜光纤聚焦特性研究

锥形透镜光纤(TLF)是实现光纤与平面光波光路(PLC)芯片高效耦合的核心元件。了解和掌握其聚焦特性是指导平面光波光路尾纤封装技术的关键。给出了表征锥形透镜光纤聚焦特性的两个参量出射光斑直径和远场发散角的理论分析模型,其误差小于1.14%;采用光束传播法数值模拟了锥形透镜光纤中的光波传输和模斑的演化,确定了锥形透镜光纤端面出射光斑的大小;优化锥形透镜光纤结构参量为:拉锥长度300μm,锥角0.733°,透镜曲率半径13.485μm;建立了基于数字摄像机的锥形透镜光纤出射光场测试系统,提出了物理光学反向推演法,计算出锥形透镜光纤聚焦光斑尺寸和远场发散角。理论与实验结果有着良好的一致:对于相同结构参量的锥形透镜光纤,实验反推法得到的出射光斑尺寸与理论值相比误差为3.15%,远场发散角误差为3.67%。     

Theoretical and experimental research on a disk-type non-contact ultrasonic motor

We developed a disk-type non-contact ultrasonic motor based on B22 vibration mode. The rotors of SU-8 photoresist are fabricated by the UV-LIGA process to control their shapes and thicknesses. So the structures of them are optimized by the experiments. It is found that the revolution speed of disk-type non-contact ultrasonic motor not only depends on the vibration amplitude of the stator, but also the weight and construction of the rotors. The maximum revolution speed of the optimal rotor is 3569 rpm at the input voltage of 20 V and the driving frequency of 45.6 kHz. The exciting principle of traveling wave is presented with theoretical equations. The electric signals applied to the piezoelectric ceramic are designed by the principle. The natural frequency and corresponding vibration mode are calculated and analyzed using finite element method. It is shown that experimental results are in good agreement with simulation, which verifies the effectiveness of the finite element model. Moreover, the levitation distance between the stator and rotor is measured by a CCD laser displacement transducer.