A chitosan–polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen

An extracting medium based on chitosan–polypyrrole (CS–PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS–PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS–PPy magnetic nanocomposite was compared with the CS-MNPs and Fe₃O₄ nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS–PPy magnetic nanocomposite possess more porous structure. Among different synthesized magnetic nanocomposites, CS–PPy magnetic nanocomposite showed a prominent efficiency. Influencing parameters on the morphology of CS–PPy magnetic nanocomposite such as weight ratio of components was also assayed. In addition, effects of different parameters influencing the extraction efficiency of naproxen including desorption solvent, desorption time, amount of sorbent, ionic strength, sample pH and extraction time were investigated and optimized. Under the optimum condition, a linear calibration curve in the range of 0.04–10 μg mL⁻¹ (R² = 0.9996) was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.015 and 0.04 μg mL⁻¹ (n = 3), respectively. The relative standard deviation for water sample spiked with 0.1 μg mL⁻¹ of naproxen was 3% (n = 5) and the absolute recovery was 92%. The applicability of method was extended to the determination of naproxen in tap water, human urine and plasma samples. The relative recovery percentages for these samples were in the range of 56–99%.     

Synthesis,Electrical Conductivity,Spectral and Thermal Stability Studies on Poly(aniline-co-o-nitroaniline)

o-Nitroaniline units were incorporated in the polyaniline backbone through copolymerization with aniline. The copolymers were synthesized for 1:3 and 1:1 molar ratios of aniline and o-nitroaniline in acidic medium using potassium persulphate as oxidant and their properties were compared with that of polyaniline. The polymers showed less electrical conductivity than polyaniline. Unlike polyaniline, the presence of nitro group caused higher frequency dependence of electrical conductivity. Electronic spectra showed a blue shift in both the band of the copolymers due to the decrease in the extent of conjugation leading to lower conductivity, which could also be explained in terms of a decrease of delocalization of electron as evinced from electron para magnetic resonance (EPR) data. Thermo gravimetric analysis (TGA) revealed that copolymer derived from 1:1 molar ratio showed comparable thermal stability with polyaniline and the one derived from 1:3 molar ratios is thermally less stable than polyaniline. Activation energies for thermal degradation were estimated using Broido equation. The temperature dependence of electrical conductivity suggested charge transport is mainly through variable range hopping.     

Chromium Trioxide Supported onto Wet Silica Gel: Rapid Oxidation of Alcohols to Carbonyl Compounds Under Microwave Irradiation in Solventless System

In an environmentally benign system, alcohols are rapidly oxidized to carbonyl compounds using CrO 3 supported onto wet silica gel as an oxidant under microwave irradiation.     

Chemical composition and antimicrobial activity of the essential oils of Ferula latisecta and Mozaffariania insignis from Iran

The hydrodistilled oils from the aerial parts of Ferula latisecta and Mozaffariania insignis, which is endemic to Iran, were analyzed by GC and GC/MS. (Z)-Ocimenone (32.4%), (E)-ocimenone (20.3%), and cis-pinocarvone (11.4%) were the main components among the 22 constituents characterized in the oil of F. latisecta, representing 87.7% of the total components detected. Twenty-five compounds were identified in the oil of M. insignis, representing 99.0% of the total oil, with octyl acetate (41.1%), β-pinene (30.3%), and α-pinene (23.9%) as the main constituents. The essential oils were examined for their potential antimicrobial activities. Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 561–563, November–December, 2006.     

A two-stage sparse logistic regression for optimal gene selection in high-dimensional microarray data classification

Advances in Data Analysis and Classification - The common issues of high-dimensional gene expression data are that many of the genes may not be relevant, and there exists a high correlation among...     

Analytical evaluation of three wild growing Omani medicinal plants

Three wild Omani plants, Moringa peregrina, Acacia nilotica and Rhazya stricta, were selected for the present study. Na, K and Ca contents were determined using flame photometric analysis. M. peregrina seeds (22.5 mg/g) and pods (27.7 mg/g) had higher Na contents than A. nilotica (0.33 mg/g) and R. stricta (0.30 mg/g), whereas the K and Ca contents of R. stricta were significantly higher than those of the other two plants. The protein content was lowest in R. stricta (9.8%) and highest in M peregrina seeds (21.0%). The highest total phenolic contents (TPC) were found in M. peregrina seeds (350.3 mg/g) and the lowest in A. nilotica (66.1 mg/g). The major component of M. peregrina seed oil was oleic acid (74.7%). Gas chromatographic-mass spectrometric analysis (GC-MS) revealed that octadecanal (30.9%) was the major compound in A. nilotica. The presence of various phenolics and flavonoids in M. peregrina, A. nilotica and R. stricta were confirmed by high performance liquid chromatography (HPLC).     

Efficacy of 2-Hydroxyflavanone in Rodent Models of Pain and Inflammation: Involvement of Opioidergic and GABAergic Anti-Nociceptive Mechanisms

The current work examined the pharmacological potential of a selected flavanone derivative 2-hydroxyflavanone as a promising remedy for the treatment and management of pain. The selected flavanone derivative (2-HF) was evaluated for its analgesic and anti-inflammatory potentials following standard pharmacological protocols including hot plate, acetic acid-induced writhing and tail immersion tests. Naloxone and pentylenetetrazol were used to evaluate the potential implication of GABAergic and opioidergic mechanisms. The anti-inflammatory potential of 2-HF was confirmed using carrageenan-, serotonin- and histamine-induced paw edema models as well as a xylene-induced ear edema model. Furthermore, the anti-neuropathic potential of 2-HF was tested using a cisplatin-induced neuropathic pain model. Our sample, at the tested concentrations of 15, 30 and 45 mg kg⁻¹, showed considerable analgesic, anti-inflammatory effects, as well as efficacy against neuropathic pain. Naloxone and pentylenetetrazol at 1 and 15 mg kg⁻¹ antagonized the anti-nociceptive activities of 2-hydroxyflavanone indicating the involvement of opioidergic and GABAergic mechanisms. In the static allodynia model, combination of gabapentin 75 mg kg⁻¹ with 2-HF at 15, 30, 45 mg kg⁻¹ doses exhibited considerable efficacy. In cold allodynia, 2-hydroxyflavanone, at doses of 15, 30 and 45 mg kg⁻¹ and in combination with gabapentin (75 mg kg⁻¹), demonstrated prominent anti-allodynic effects. The paw withdrawal latency was considerably increased in gabapentin + cisplatin treated groups. Moreover, cisplatin + 2-hydroxyflavanone 15, 30, 45 mg kg⁻¹ showed increases in paw withdrawal latency. Likewise, considerable efficacy was observed for 2-hydroxyflavanone in thermal hyperalgesia and dynamic allodynia models. Our findings suggest that 2-hydroxyflavanone is a potential remedy for pain syndrome, possibly mediated through opioidergic and GABAergic mechanisms.     

A Box–Behnken Extraction Design and Hepatoprotective Effect of Isolated Eupalitin-3-O-β-D-Galactopyranoside from Boerhavia diffusa Linn.

The objectives of this study were to optimize and quantify the maximum percentage yield of eupalitin-3-O-β-D-galactopyranosidefrom Boerhavia diffusa leaves using response surface methodology (RSM), as well as to demonstrate the hepatoprotective benefits of the bioactive compound. The Box–Behnken experimental design was utilized to optimize the eupalitin-3-O-β-D-galactopyranoside extraction procedure, which also looked at the extraction duration, temperature, and solvent concentration as independent variables. Boerhaviadiffusa leaves were extracted, and n-hexane, chloroform, ethyl acetate, and water were used to fractionate the dried extracts. The dried ethyl acetate fraction was thoroughly mixed in hot methanol and stored overnight in the refrigerator. The cold methanol was filtered, the solid was separated, and hot methanol was used many times to re-crystallize the solid to obtain pure eupalitin-3-O-β-D-galactopyranoside (0.1578% w/w). The proposed HPTLC method for the validation and quantification of eupalitin-3-O-β-D-galactopyranosidewassuccessfully validated and developed. The linearity (R₂ = 0.994), detection limit (30 ng), and quantification limit (100 ng) of the method, as well as its range (100–5000 ng), inter and intraday precision (0.67% and 0.991% RSD), specificity, and accuracy (99.78% RSD), were all validated as satisfactory. The separation of the eupalitin-3-O-β-D-galactopyranoside band was achieved on an HPTLC plate using toluene:acetone:water (5:15:1 v/v) as a developing system. The Box–Behnken statistical design was used to determine the best optimization method, which was found to be extraction time (90 min), temperature (45 °C), and solvent ratio (80% methanol in water v/v) for eupalitin-3-O-β-D-galactopyranoside. Standard silymarin ranged from 80.2% at 100 µg/mL to 86.94% at 500 µg/mL in terms of significant high hepatoprotection (cell induced with carbon tetrachloride 0.1%), whereas isolated eupalitin-3-O-β-D-galactopyranoside ranged from 62.62% at 500 µg/mL to 70.23% at 1000 µg/mL. More recently, it is a source of structurally unique flavonoid compounds that may offer opportunities for developing novel semi-synthetic molecules.     

The thermal diffusivity of natural rubber

Measurements of thermal diffusivities of peroxide-cured and sulfur-cured rubbers, over the range 0–100°C and 0–75 phr of carbon, are described. They are based on the asymptotic time dependences of heating and cooling curves, recorded following quenching of the samples into baths at various temperatures. The diffusivities are shown to depend linearly on both temperature and carbon content, to reasonable accuracies over the ranges studied. Some theory bearing on measurement techniques is presented.