Green solid-phase peptide synthesis 4. γ-Valerolactone and N-formylmorpholine as green solvents for solid phase peptide synthesis

Herein, we report the use of γ-valerolactone (GVL) and N-formylmorpholine (NFM) as DMF substitutes in polystyrene based SPPS. The solubility of selected amino acids and coupling reagents were studied in GVL and NFM, followed by their use in the successful synthesis of Aib-enkephalin pentapeptide (H-Tyr-Aib-Aib-Phe-Leu-NH₂) and Aib-ACP decapeptide (H-Val-Gln-Aib-Aib-Ile-Asp-Tyr-Ile-Asn-Gly-NH₂).     

Promoter effect on the CO2-H2O formation during Fischer-Tropsch synthesis on iron-based catalysts

The effects of Mg, La and Ca promoters on primary and secondary CO_2 and H_2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO_2 catalysts are investigated. The chemisorbed oxygen atoms in the primary pathway formed in the CO dissociation steps reacted with co-adsorbed hydrogen or carbon monoxide to produce H_2O and CO_2 , respectively. The secondary pathway was the water-gas shift reaction. The results indicated that the CO_2 production led to an increase in both primary and secondary pathways, and H_2 O production decreased when surface basicity of the catalyst increased in the order Ca >Mg >La.     

One-pot synthesis of benzochromeno-pyrazole derivatives

Abstract  

One-pot synthesis of different benzochromeno-pyrazole derivatives has been reported via reaction of aldehydes, 3-methyl-1H-pyrazol-5(4H)-one and α-naphthol/β-naphthol in the presence of sulfamic acid.     

TiO<Subscript>2</Subscript> nanotube height effect on the efficiency of dye-sensitized solar cells

Performance of dye-sensitized solar cells (DSSCs) based on TiO₂ nanotubes (NTs) filled with TiO₂ nanoparticles (NPs) was studied as a function of NT height (h). The NT height was varied in the range of 1.5–7.0 μm, while the NT diameter was kept constant at ~80 nm. The studies showed that DSSC efficiency, current density, and fill factor linearly increased with h and ranged in 1.76–6.5%, 3.62–13.2 mA/cm², and 0.66–0.76, respectively, within the h range studied. The electrochemical impedance spectroscopy was also performed to study DSSC electron transport properties. Based on both photovoltaic and electrochemical impedance spectroscopy data, the results were explained as being due to the increased dye loading that led to higher light-harvesting efficiency.     

Effect of Ge4+ and Mg2+ doping on superconductivity,fluctuation induced conductivity and interplanar coupling of TlSr2CaCu2O7−δ superconductors

Substitution of Ge⁴⁺ in place of Cu in Tl_0.85Cr_0.15Sr₂CaCu_2?xGe_xO_7?δ (x = 0–0.6) showed initial increase in zero critical temperature value, T_{c zero} from 98 K (x = 0) to 100 K (x = 0.1) and in the range of 85–86 K for x = 0.2–0.3. The slow decrease in T_{c zero} is unexpected as tetravalent Ge⁴⁺ substitution is expected to strongly reduce hole concentration in the samples and suppress T_{c zero}. Excess conductivity analyses of resistance versus temperature data based on Asmalazov–Larkin (AL) theory revealed that the substitution induced 2D-to-3D transition of fluctuation induced conductivity with the highest transition temperature, T_2D–3D observed at x = 0.1. FTIR spectroscopy analysis indicates Ge⁴⁺ substitution cause reduction in CuO₂/GeO₂ interplanar distance while our calculation based on Lawrence–Doniach model revealed highest superconducting coherence length, ξ_c(0) and interplanar coupling, J at x = 0.3. On the other hand, substitution of divalent Mg²⁺ for Ca²⁺ in (Tl_0.5Pb_0.5)(Sr_1.8Yb_0.2)(Ca_1?yMg_y)Cu₂O₇ (y = 0–1.0), which is not expected to directly vary hole concentration, surprisingly caused T_{c zero} to increase from 89.6 K (y = 0) to an optimum value of 95.9 K (y = 0.6) before decreasing with further increase in y. Excess conductivity analyses showed 2D-to-3D transition of fluctuation induced conductivity for all samples where the highest T_2D–3D was at y = 0.4. Similar calculation revealed highest values of ξ_c(0) and J also at y = 0.4. FTIR analysis of the samples indicates inequivalent Cu(1)O(2)Pb/Tl lengths and possible tilting of CuO₂ plane as a result of Mg²⁺ substitution. The increased ξ_c(0) and J as a result of the Ge⁴⁺ and Mg²⁺ substitutions are suggested to contributed to sustenance of superconductivity above 80 K in the samples.     

A two-stage sparse logistic regression for optimal gene selection in high-dimensional microarray data classification

Advances in Data Analysis and Classification - The common issues of high-dimensional gene expression data are that many of the genes may not be relevant, and there exists a high correlation among...     

ZEOLITE-SUPPORTED CHROMIUM(VI) OXIDE: A MILD,EFFICIENT, AND INEXPENSIVE REAGENT FOR OXIDATIVE DEPROTECTION OF TRIMETHYLSILYL ETHERS UNDER MICROWAVE IRRADIATION

Primary and secondary trimethylsilyl ethers are effeciently converted to the corresponding carbonyl compounds using HZSM-5 zeolite-supported CrO ₃ under microwave irradiation in solventless system.     

A chitosan–polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen

An extracting medium based on chitosan–polypyrrole (CS–PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS–PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS–PPy magnetic nanocomposite was compared with the CS-MNPs and Fe₃O₄ nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS–PPy magnetic nanocomposite possess more porous structure. Among different synthesized magnetic nanocomposites, CS–PPy magnetic nanocomposite showed a prominent efficiency. Influencing parameters on the morphology of CS–PPy magnetic nanocomposite such as weight ratio of components was also assayed. In addition, effects of different parameters influencing the extraction efficiency of naproxen including desorption solvent, desorption time, amount of sorbent, ionic strength, sample pH and extraction time were investigated and optimized. Under the optimum condition, a linear calibration curve in the range of 0.04–10 μg mL⁻¹ (R² = 0.9996) was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.015 and 0.04 μg mL⁻¹ (n = 3), respectively. The relative standard deviation for water sample spiked with 0.1 μg mL⁻¹ of naproxen was 3% (n = 5) and the absolute recovery was 92%. The applicability of method was extended to the determination of naproxen in tap water, human urine and plasma samples. The relative recovery percentages for these samples were in the range of 56–99%.     

Polymeric emulsion and crosslink-mediated synthesis of super-stable nanoparticles as sustained-release anti-tuberculosis drug carriers

This study focused on evaluating four emulsion-based processing strategies for polymeric nanoparticle synthesis to explicate the mechanisms of nanoparticle formation and the influence on achieving sustained-release of two anti-tuberculosis drugs, isoniazid and rifampicin. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles were formulated with and without sorbitan mono-oleate as a stabilizer using emulsion-solvent-surfactant-evaporation (ESSE) and emulsion-solvent-evaporation (ESE) approaches. An alginate solution gelled by ionic crosslinking with calcium chloride was employed to prepare alginate hydrogel nanoparticles via reverse-emulsion-cationic-gelification (RECG) and reverse-emulsion-surfactant-cationic-gelification (RESCG) approaches. In vitro drug release analysis was performed. The size, zeta potential and morphology of the nanoparticles were analyzed. Molecular mechanics energy relationships (MMER) were employed to explore the spatial disposition of alginate and PLGA with respect to the emulsifying profile of sorbitan monooleate and to corroborate the experimental findings. Results revealed that particle size of the PLGA nanoparticles was influenced by the stabilizer concentration. Nanoparticles synthesized by the ESSE approach had smaller sizes of 240±8.7 nm and 195.5±5.4 nm for rifampicin- and isoniazid-loaded nanoparticles, respectively. This was a substantial size reduction from nanoparticles generated by the ESE approach (>1000 nm). The RESCG approach produced stable and higher nanoparticle yields with desirable size (277±1.0 nm; 289±1.2 nm), a low polydispersity index (27.1±0.3 mV; 28.5±0.5 mV) and drug entrapment efficiency of 73% and 75% for isoniazid and rifampicin, respectively. Drug release from the ESSE and RESCG synthesized nanoparticles displayed desirable release of the two anti-TB drugs with sustained zero-order kinetics over a period of 8h. MMER supported the mechanisms of nanoparticle formation with a sphericalized interlaced network configuration.     

Conductivity,structure, and thermal properties of chitosan‐based polymer electrolytes with nanofillers

This paper focus on the effect of nanosize (<50 nm BET) inorganic alumina (Al₂O₃) filler on the structural, conductivity, and thermal properties of chitosan‐based polymer electrolytes. Films of chitosan and its complexes were prepared using solution‐casting technique. Different amounts of Al₂O₃ viz., 3, 4.5, 6, 7.5, 9, 12, and 15 wt% were added to the highest room temperature conducting sample in the chitosan–salt system, i.e. sample containing 60 wt% chitosan–40 wt% NH₄SCN. The conductivity value of the sample is 1.29 × 10^?4 S cm^?1. On addition of 6 wt% Al₂O₃ filler the ionic conductivity increased to 5.86 × 10^?4 S cm^?1. The amide and amino peaks in the spectrum of chitosan at 1636 and 1551 cm^?1, respectively, shift to lower wavenumbers on addition of salt. The glass transition temperature T_g for the highest conducting composite is 190°C. The increase in T_g with increase in more than 6 wt% filler content is attributed to the increase in degree of crystallinity as proven from X‐ray diffraction studies. Copyright © 2009 John Wiley & Sons, Ltd.