0+ analogue state in 118Sb from 117Sn(p,nγ) reaction

The analogue of the 0⁺ ground state in ¹¹⁸Sn has been observed in the compound nucleus ¹¹⁸Sb through ¹¹⁷Sn(p,n γ) ¹¹⁷Sb reaction. The neutron decays of this analogue resonance have been studied from the deexciting γ-rays of the residual nucleus ¹¹⁷Sb. From off resonance excitation functions, spin assignments have been made to states in ¹¹⁷Sb, on the basis of Hauser-Feshbach formalism. The resonance parameters of the isobaric analogue resonance have been determined, including the total, proton and neutron decay widths.     

Assessment of filtered gas–solid momentum transfer models via a linear wave propagation speed test

The propagation speeds of linear waves in gas–solid suspensions depend strongly on the solids volume fraction and the wave frequency. The latter is due to gas–solid momentum transfer and allows a simple test on filtered gas–solid momentum transfer models. Such models may predict linear wave propagation speeds different from those obtained with the non-filtered model at wave frequencies higher than the filter frequency, but not at wave frequencies lower than the filter frequency.     

An accurate method to predict the stress concentration in composite laminates with a circular hole under tensile loading

The paper presents a theoretical-numerical hybrid method for determining the stresses distribution in composite laminates containing a circular hole and subjected to uniaxial tensile loading. The method is based upon an appropriate corrective function allowing a simple and rapid evaluation of stress distributions in a generic plate of finite width with a hole based on the theoretical stresses distribution in an infinite plate with the same hole geometry and material. In order to verify the accuracy of the method proposed, various numerical and experimental tests have been performed by considering different laminate lay-ups; in particular, the experimental results have shown that a combined use of the method proposed and the well-know point-stress criterion leads to reliable strength predictions for GFRP or CFRP laminates with a circular hole. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 43, No. 4, pp. 531–570, July–August, 2007.     

Local control of electric current driven shell etching of multiwalled carbon nanotubes

We report on a novel method for local control of shell engineering in multiwalled carbon nanotubes (MWNTs) using Joule-heating induced electric breakdown. By modulating the heat dissipation along a nanotube, we can confine its thinning and shell breakdown to occur within localized regions of peak temperatures, which are distributed over one-half of the NT length. The modulation is achieved by using suitably designed nanomachined heat sinks with different degrees of thermal coupling at different parts of a current-carrying nanotube. The location of electric breakdown occurs precisely at the regions of high temperatures predicted by the classical finite-element model of Joule heating in the MWNT. The experiments herein provide new insight into the electric breakdown mechanism and prove unambiguously that shell removal occurs due to thermal stress, underpinning the diffusive nature of MWNTs. The method demonstrated here has the potential to be a powerful tool in realizing MWNT bearings with complex architectures for use in integrated nanoelectromechanical systems (NEMS). In addition, the breakdown current and power in the nanotubes are significantly higher than those observed in nanotubes without heat removal via additional heat sinks. This indicates future avenues for enhancing the performance of MWNTs in electrical interconnect and nanoelectronic applications. PACS  73.63.Fg; 65.80.+n     

Catalytic supports on the base of activated anthracites and synthetic carbons

Selective adsorption of platinum group metals (PMG) on activated carbons from a multi-component model and technological solutions was proposed for the preparation of heterogeneous-supported catalysts. Activated natural anthracites and a nitrogen-containing synthetic carbon are considered as carriers for Pd-supported catalysts. Their catalytic activity was studied in the Pd-catalyzed reactions of hydrogen peroxide decomposition and chloride ions oxidation by manganese(III). On the base of the obtained results, novel high sensitive analytical methods both for direct determination of supported-metal quantity and palladium oxidation states on the surface of spent adsorbents are suggested.     

Volumetric and refractive properties of binary mixtures containing 1,3-dioxolane and isomeric chlorobutanes

The relation between refractive index deviations and excess volumes for binary mixtures formed by a cyclic ether and a haloalkane has been tested using several methods: refractive index mixing rules and equations of state. Refractive index deviations, excess volumes and molar refractions have been calculated from experimental data of refractive indices and densities at two temperatures 298.15 and 313.15 K. Results obtained have been discussed in terms of intermolecular interactions. Refractive indices were compared with those predicted by several mixing rules. Excess volumes have also been correlated using several cubic equations of state and finally a relation between parameter b from equations of state and molar refraction has been provided.     

Thermal properties of poly(styrene) containing brominated aryl phosphate additives

General purpose poly(styrene) is a large volume commodity polymer widely used in a range of applications. For many of these the presence of an additive to impart some flammability resistance is required. Most commonly, brominated aromatics are used for this purpose. As the polymer undergoes combustion these compounds decompose to generate bromine atoms and/or hydrogen bromide which escape to the gas phase and trap flame propagating radicals. While these species are effective in inhibiting flame propagation they present the opportunity for loss of halogen to the atmosphere. For this reason, the use of these compounds is being limited in some parts of the world. Phosphorus compounds, on the other had, impart a flame retarding influence by promoting char formation at the surface of the burning polymer. This prevents heat feedback to the polymer and consequent pyrolysis to generate fuel fragments. The combination of both bromine and phosphorus present in a single compound might generate a superior flame-retarding additive in that both modes of retardancy might be promoted simultaneously. Should this be the case smaller amounts of additive might be necessary to achieve a satisfactory level of flame retardancy. A series of such additives, brominated aryl phosphates, has been synthesized and fully characterized spectroscopically. Blends of these additives, at various levels, with poly(styrene) have been examined by DSC, TG and in the UL-94 flame test. The flammability of the polymer is dramatically diminished by the presence of the additive.     

Specific features of separate and joint mastication of natural and 1,4-cis-butadiene rubbers in the presence of dibenzoylaminodiphenyl disulfide

Variation of the molecular structure characteristics and properties of natural and 1,4-cis-polybutadiene rubbers (gel content, molecular weight, degree of branching of macromolecules, viscosity) in the course of their separate and joint mastication in the presence of dibenzoylaminodiphenyl sulfide as mastication accelerator or without it was studied.