The first photocrystallographic evidence for light-induced metastable linkage isomers of ruthenium sulfur dioxide complexes

Light-induced metastable linkage isomers of trans-[Ru(NH(3))(4)Cl(SO(2))]Cl and trans-[Ru(NH(3))(4)(H(2)O)(SO(2))](C(6)H(5)SO(3))(2) have been identified for the first time using photocrystallographic methods. In both linkage isomers the SO(2) ligand is side bound, but the Ru-O and Ru-S distances are considerably longer and almost equal in the trans-H(2)O isomer. DFT calculations confirm that both isomers correspond to minima on the ground-state potential energy surface and also predict the existence of a second oxygen-bound isomer for both compounds. The decay of the light-induced species has been studied by both DSC and IR. Activation energies for the thermal back-reaction, as derived from the temperature-dependent disappearance of light-induced IR bands, are 50.0 and 58.4 kJ/mol for the two isomers, which is larger than the corresponding numbers for photoinduced side-bound nitrosyl linkage isomers.     

Capillary electrophoresis in aqueous-organic media. Ionic strength effects and limitations of the Hubbard-Onsager dielectric friction model

The mobilities of three aromatic sulfonates, ranging in charge from -1 to -3, were investigated by capillary electrophoresis using buffers containing 0 to 75% ethanol or 2-propanol. Absolute mobilities were determined by extrapolation of the effective mobilities to zero ionic strength according to the Pitts' equation. For all buffers studied, ions of higher charge experienced larger ionic strength effects. The resulting ionic strength-induced selectivity alterations were more dramatic when organic solvents were present in the media. Furthermore, for different organic modifier types and contents, the magnitude of the ionic strength effect was governed to a large extent by the 1/(eta epsilon 1/2) dependence in the electrophoretic effect of the Pitts' equation. Addition of ethanol or 2-propanol to the electrophoretic media resulted in changes in the absolute mobilities of the ions. These solvent-induced mobility changes are attributed to dielectric friction. As predicted by the Hubbard-Onsager model, dielectric friction increased with increasing organic content and with increasing analyte charge. As a result, dramatic changes in the relative absolute mobilities were observed, such as a reversal in migration order between sulfonates of -1 and -3 charge in 75% 2-propanol. Within the alcohols, the Hubbard-Onsager model was successful at predicting the relative mobility trends upon changing solvent. However, the relative trends observed between acetonitrile-water and alcohol-water media were not consistent with the model. This may be explained by the continuum nature of the model, whereby the different ion-solvent interactions characteristic to each solvent class are not taken into account.     

Selective fluorometric detection of polyamines using micellar electrokinetic chromatography with laser-induced fluorescence detection

The polyamines putrescine, cadaverine, spermine and spermidine were separated and quantified by micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence detection. The derivatization reagent, 1-pyrenebutanoic acid succinimidyl ester (PSE), allowed for the selective detection of the polyamines at 490 nm. Multiple labeling of the polyamines with PSE allows the formation of intramolecular excimers that emit at longer wavelengths (450-520 nm) than mono-labeled analytes (360-420 nm). Optimal separation of the labeled polyamines was achieved using a separation buffer consisting of 10 mM phosphate pH 7.2, 30 mM cholate, and 30% acetonitrile. Using these conditions, the four polyamines were separated in under 10 min. Limits of detection for putrescine, cadaverine, spermine and spermidine were 6, 5, 15 and 13 nM, respectively. These are superior or comparable to those previously reported in the literature using fluorescence detection.     

Joule heating in packed capillaries used in capillary electrochromatography

Effective heat dissipation is critical for reproducible and efficient separations in electrically driven separation systems. Flow rate, retention kinetics, and analyte diffusion rates are some of the characteristics that are affected by variation in the temperature of the mobile phase inside the column. In this study, we examine the issue of Joule heating in packed capillary columns used in capillary electrochromatography (CEC). As almost all commonly used CEC packings are poor thermal conductors, it is assumed that the packing particles do not conduct heat and heat transfer is solely through the mobile phase flowing through the system. The electrical conductivity of various mobile phases was measured at different temperatures by a conductivity meter and the temperature coefficient for each mobile phase was calculated. This was followed by measurement of the electrical current at several applied voltages to calculate the conductivity of the solution within the column as a function of the applied voltage. An overall increase in the conductivity is attributed to Joule heating within the column, while a constant conductivity means good heat dissipation. A plot of conductivity versus applied voltage was used as the indicator of poor heat dissipation. Using theories that have been proposed earlier for modeling of Joule heating effects in capillary electrophoresis (CE), we estimated the temperature within CEC columns. Under mobile and stationary phase conditions typically used in CEC, heat dissipation was found to be not always efficient. Elevated temperatures within the columns in excess of 23 degrees C above ambient temperature were calculated for packed columns, and about 35 degrees C for an open column, under a given set of conditions. The results agree with recently published experimental findings with nuclear magnetic resonance (NMR) thermometry, and Raman spectroscopic measurements.     

Heavy-atom kinetic isotope effects,cocatalysts, and the propagation transition state for polymerization of 1-hexene using the rac-(C(2)H(4)(1-indenyl)(2))ZrMe(2) catalyst precursor

Using 13C NMR techniques, the 12C/13C kinetic isotope effects (KIEs) for the polymerization of 1-hexene catalyzed by rac-(C2H4(1-indenyl)2)ZrMe2 in the presence of four different cocatalysts (tris(pentfluorophenyl)borane, tris(pentafluorophenyl)alane, anilinium tetrakis(pentafluorophenyl)borate, and methylalumoxane) have been determined. All cocatalysts yield similar KIEs within experimental uncertainty, with values of 1.009(1) and 1.017(2) at C1 and C2, respectively. Ab initio DFT computational modeling of the polymerization KIE indicates that alkene binding to the catalyst must be reversible, with the majority of the KIE developing in the subsequent migratory insertion reaction.     

Aggregation and dispersion characteristics of calcium oxalate monohydrate: effect of urinary species

In this research, screening and central composite experimental designs are used to determine the effect of various factors on the aggregation and dispersion characteristics of previously grown calcium oxalate monohydrate (COM) crystals in artificial urinary environments of controlled variables. The variables examined are pH and calcium, oxalate, pyrophosphate, citrate, and protein concentrations in ultrapure water and artificial urine. Optical density measurements, particle size analysis, optical microscopy, AFM force measurements, and protein adsorption have been used to assess the state of aggregation and dispersion of the COM crystals and to elucidate the mechanisms involved in such a complex system. The data indicate that our model protein, mucin, acts as a dispersant. This is attributed to steric hindrance resulting from the adsorbed mucoprotein. Oxalate, however, promotes aggregation. Interesting interactions between protein and oxalate along with protein and citrate are observed. Such interactions (synergistic or antagonistic) are found to depend on the concentrations of these species. Surface responses for these interactions are presented and discussed in this paper. In summary, solution, surface, and interface chemistries interact in a complex manner in the physiological environment to either inhibit or promote aggregation, and an understanding of such interactions may help determine and control the factors affecting kidney stone formation.     

Synthesis and anti-HIV activity of 5-haloethynyl and 5-(1,2-dihalo)vinyl analogues of AZT and FLT

In this paper, we report the synthesis of hitherto unknown 5-haloethynyl and 5-(1,2-dihalo)vinyluracil nucleoside analogues of the anti-HIV AZT, and FLT drugs. The key step of those syntheses is a Pd(0) cross-coupling at C5 position under Sonogashira conditions. Finally, based on their in vitro anti-HIV activities and their cytotoxicity on PBM, CEM, and VERO cell lines, the best compounds were the 2′,3′-dideoxy-3′-fluoro-5-(bromo-2-iodo)vinyluridine (10b, EC₅₀ of 0.6 μM), and the 3′-azido-2′,3′-dideoxy-5-(bromo-2-iodo)vinyluridine (16b, EC₅₀ of 1.1 μM).     

Single-walled carbon nanotube-facilitated dispersion of particulate TiO2 on ZrO2 ceramic membrane filters

We report that SWCNTs substantially improve the uniformity and coverage of TiO2 coatings on porous ZrO2 ceramic membrane filters. The ZrO2 filters were dip coated with 100 nm anatase TiO2, TiO2/SWCNT composites, a TiO2+SWCNT mixture, and a TiO2/MWCNT composite at pH 3, 5, and 8. Whereas the TiO2+SWCNT mixture and the TiO2/MWCNT composite promote better coverage and less clumping than TiO2 alone, the TiO2/SWCNT composite forms a complete uniform coating without cracking at pH 5 ( approximately 100% coverage). A combination of chemical and electrostatic effects between TiO2 and SWCNTs forming the composite as well as between the composite and the ZrO2 surface explains these observations.