磷钨酸对甲酸在碳载Pd催化剂上电氧化的促进作用

利用X射线能量色散(EDS)谱、X射线衍射(XRD)谱和电化学等技术研究了电解液中磷钨酸(PWA)对直接甲酸燃料电池(DFAFC)中甲酸在碳载Pd(Pd/C)催化剂上电氧化的促进作用. 研究结果发现, 因吸附的PWA能促进甲酸在Pd/C催化剂上的脱氢而加速了甲酸的电氧化. 这种促进作用与PWA的浓度有关, 当PWA的浓度低于0.15 mg/mL时, 该促进作用随PWA的浓度的增加而增加; 当PWA的浓度高于0.15 mg/mL时, 过多吸附的PWA会覆盖过多Pd/C催化剂的活性点而使其电催化性能随PWA的浓度增大而降低. 因此, 当电解液中PWA的浓度为0.15 mg/mL时, Pd/C催化剂对甲酸氧化的电催化性能最好.     

Temperature dependent responsivity of quantum dot infrared photodetectors

Temperature dependent behavior of the responsivity of InAs/GaAs quantum dot infrared photodetectors was investigated with detailed measurement of the current gain. The current gain varied about two orders of magnitude with 100 K temperature change. Meanwhile, the change in quantum efficiency is within a factor of 10. The dramatic change of the current gain is explained by the repulsive coulomb potential of the extra carriers in the QDs. With the measured current gain, the extra carrier number in QDs was calculated. More than one electron per QD could be captured as the dark current increases at 150 K. The extra electrons in the QDs elevated the Fermi level and changed the quantum efficiency of the QDIPs. The temperature dependence of the responsivity was qualitatively explained with the extra electrons.     

Polycarbonate nanoparticles spray coated on silicon substrate using micro-electromechanical-systems-based high-frequency ultrasonic nozzle

Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (M_w) of approximately 6.4 × 10⁴ g/mol was first dissolved in pyridine. The resulting solution was sprayed into surfactant-containing de-ionized (DI) water using a 300 kHz silicon-based multiple-Fourier horn nozzle (MFHN). As pyridine was extracted into the water, PC nanoparticles formed but remained dispersed. This suspension of PC nanoparticles was then sprayed onto a silicon substrate using a 500 kHz 3-Fourier horn nozzle. Scanning electron microscopy (SEM) of the dried substrate revealed that PC nanoparticles were spread uniformly with no aggregation.     

Gas chromatographic analysis of the thermally unstable dimethyl methylphosphonate carbanion via trimethylsilyl derivatization

An HPLC method to quantitate phytometallophores (phytosiderophores) exuded from roots of barley (Hordeum vulgare L.) growing in nutrient solution culture was developed. 9-Fluorenylmethyl chloroformate (FMOC) derivatives of phytometallophores were separated on a C18 reverse-phase column using a sodium acetate (pH 7.2) and acetonitrile-methanol gradient over 20 min followed by fluorescence detection. Detection limits ranged from 15 to 370 pmol depending on the particular phytometallophore. The effectiveness of this method was demonstrated using the response of barley seedlings to Fe-sufficient and Fe-deficient nutrient solution conditions. Phytometallophores collected in root washings of Fe-deficient barley seedlings increased with plant age while phytometallophore release from Fe-adequate roots was negligible.     

Spectrophotometric determination of deacetylation degree of chitinous materials dissolved in phosphoric acid

A simple spectrophotometric method is proposed for determining deacetylation degrees (DD) of chitinous materials using phosphoric acid as the UV-transparent solvent system. Calibrating by the extinction coefficients (A(210)) of D-glucosamine and N-acetyl-D-glucosamine, DD values (24-88%) were computed numerically. The results correlated well (R(2) = 0.9805, n = 50) with those obtained by solid-state (13)C NMR. Comparison of the results obtained by the proposed UV method and solid-state (13)C NMR.     

Pyrenylamine‐functionalized aromatic polyamides as efficient blue‐emitters and multicolored electrochromic materials

A series of novel aromatic polyamides with pyrenylamine in the backbone were prepared from a newly synthesized dicarboxylic acid monomer, N,N‐di(4‐carboxyphenyl)‐1‐aminopyrene, and various aromatic diamines via the phosphorylation polyamidation technique. These polyamides were readily soluble in many organic solvents and could be solution‐cast into tough and amorphous films. They had useful levels of thermal stability with glass‐transition temperatures in the range of 276–342 °C and 10% weight loss temperatures in excess of 500 °C. The dilute N‐methyl‐2‐pyrrolidone (NMP) solutions of these polymers exhibited fluorescence maxima around 455–540 nm with quantum yields up to 56.9%. The polyamides also showed remarkable solvatochromism of the emission spectra. Their films showed reversible electrochemical oxidation and reduction accompanied by strong color changes from colorless neutral state to purple oxidized state and to yellow reduced state. The polyamide 4g containing the pyrenylamine units in both diacid and diamine sides exhibited easily accessible p‐ and n‐doped states, together with multicolored electrochromic behaviors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of oxygen addition on the hydrogen production from ethanol steam reforming in a Pd–Ag membrane reactor

In this communication, a porous stainless steel (PSS) tube was electrolessly plated into Pd–Ag membrane reactor which was used for separating hydrogen produced in an ethanol steam reforming reaction with the addition of oxygen, which has not been reported before. Palladium and silver were deposited on porous stainless steel tube via the sequential electroless plating procedure with an overall film thickness of 20 μm and Pd/Ag weight ratio of 78/22. Ethanol–water mixture (n_water/n_ethanol = 1 or 3) and oxygen (n_oxygen/n_ethanol = 0.2 or 0.7) were fed concurrently into the membrane reactor packed with MDC-3. The reaction temperatures were set at 593–723 K and the pressures 3–10 atm. The effect of oxygen addition plays a vital role on the ethanol steam reforming reaction, especially for the Pd–Ag membrane reactor in which a higher flux of hydrogen is required. If oxygen in the feed is not sufficient, it would be possible that steam reforming reaction prevails. Inversely, high O₂ addition will shift the reaction scenario to be partial oxidation dominating, and selectivity of CO₂ increases with increasing oxygen feed. At high pressure, autothermal reaction of ethanol would be easily reached.     

Enumeration in Convex Geometries and Associated Polytopal Subdivisions of Spheres

We construct CW spheres from the lattices that arise as the closed sets of a convex closure, the meet-distributive lattices. These spheres are nearly polytopal, in the sense that their barycentric subdivisions are simplicial polytopes. The complete information on the numbers of faces and chains of faces in these spheres can be obtained from the defining lattices in a manner analogous to the relation between arrangements of hyperplanes and their underlying geometric intersection lattices.     

A dynamic approach to the Shapley value based on associated games

We propose a dynamic process leading to the Shapley value of TU games or any solution satisfying Inessential Game (IG) and Continuity (CONT), based on a modified version of Hamiache's notion of an associated game. The authors are very grateful to William Thomson and two anonymous referees for valuable comments which much improve the paper. They provide better statements and proofs of several major results than the original ones.