Long period grating cascaded to photonic crystal fiber modal interferometer for simultaneous measurement of temperature and refractive index

We propose and demonstrate a novel and simple dual-parameter measurement scheme based on a cascaded optical fiber device of long-period grating (LPG) and photonic crystal fiber (PCF) modal interferometer. The temperature and refractive index (RI) can be measured simultaneously by monitoring the spectral characteristics of the device. The implemented sensor shows distinctive spectral sensitivities of -30.82 nm/RIU (refractive index unit) and 47.4 pm/°C by the LPG, and 171.96 nm/RIU and 10.4 pm/°C by the PCF modal interferometer. The simultaneous measurement of the temperature and external RI is experimentally demonstrated by the sensor. The temperature shift and RI shift calculated by the sensor matrix agree well with the actual temperature and RI change in the experiment.     

光的折射定律(Snell定律)演示实验装置

基于光子动量在不同媒质分界面上沿分界面方向守恒原理,制作了光的折射定律演示装置.使用该装置可演示入射角连续变化,折射角也自动遵循折射定律相应变化.本文介绍了该演示装置的原理、构造及使用方法.     

Search for chiral bands in A ～ 110 neutron-rich nuclei

High spin states in A ～ 110 neutron-rich 106Mo, 110Ru and 112Ru nuclei have been reinvestigated by measuring the prompt γ-rays from the spontaneous fission of 252Cf. Two similar sets of bands are observed to high spins in each of three nuclei. Through analyzing of characters of the band structures, the chiral doublet bands are suggested in 106Mo, 110Ru and 112Ru.     

滚边法测量高能X射线源焦斑大小

应用于高能闪光X光照相技术的X射线源焦斑大小是闪光照相装置的关键参数, 直接影响成像的分辨能力。由于高能X射线的强穿透性和强辐射环境, 给焦斑测量带来一定困难。介绍了一种间接测量方法, 采用滚边装置(rollbar)成像得到X射线源的边扩展函数, 微分后得到光源的线扩展函数并计算调制传递函数(MTF), 而后从MTF为0.5所对应的空间频率之值确定出光源的光斑大小。给出了神龙二号加速器电子束聚焦调试实验中得到的X射线焦斑测量结果, 分析影响测量结果的因素并提出了解决方法。     

基于神经网络模糊控制理论的转台伺服系统控制设计

针对三轴飞行仿真转台伺服系统非线性、模型不精确等特点,在分析转台系统结构的基础上,采用模糊PID控制的方法对转台伺服系统进行仿真控制,得到较好的控制效果。模糊控制控制规则的获得带有很大的人为因素,并且在控制过程中对规则采用查表法占用大量的内存。基于以上原因,设计了神经网络模糊控制器(NNSOC),利用神经网络控制自学习、自调整的能力,为模糊控制器提供自动生成控制规则的能力;同时由于神经网络具有联系记忆能力,可对未训练的样本做出决策。对NNSOC的控制效果进行了仿真。结果表明：其具有很好的动态性能和鲁棒性,对转台的控制效果良好。     

锥变截面管形超声振动系统的设计

设计了一种锥变截面管形超声振动系统,振动系统由夹心式压电换能器和锥形变截面金属圆管组成。推导了锥变截面管形超声振动系统的等效电路和谐振/反谐振频率方程。利用等效电路法、有限元法对锥变截面管形超声振动系统进行了分析设计并制作了相应的实验样品。研究结果表明,锥形变截面管的等效电路为一种新型的非互易二端口等效网络;锥变截面管形超声振动系统具有较好的频率隔离性、较大的位移振幅和均匀的振动位移输出。该超声振动系统可望在超声连续缝焊、环形部件的超声切割和超声钻孔等领域获得应用。     

CN HCCB TBS 的LOFA 与真空室内LOCA 初步分析

基于CN HCCB TBS 的最新设计,用RELAP 5 软件对失流事故(LOFA)和真空室内失冷事故(In-vessel LOCA)这两种假设基本事故进行了分析。结果表明,CN HCCB TBS 在这两种事故工况下的安全性是有保证的,并且热工水力学瞬态分析能给出有关发生事故时TBM 安全性相关性能的信息,从而提出了所需要的各种安全保护系统及其动作的时间。     

Sn掺杂ZnO薄膜的室温气敏性能及其气敏机理

采用化学气相沉积方法在预制好电极的玻璃基底上制备出Sn掺杂ZnO薄膜和纯ZnO薄膜. 两种样品典型的形貌为四足状ZnO晶须, 其直径约为150-400 nm, 呈疏松状结构. 气敏测试结果显示Sn掺杂ZnO薄膜具有优良的室温气敏性, 并对乙醇具有良好的气敏选择性, 而纯ZnO薄膜在室温条件下对乙醇和丙酮均没有气敏响应. X射线衍射结果表明两种样品均为六方纤锌矿结构. Sn掺杂ZnO样品中没有出现Sn及其氧化物的衍射峰, 其衍射结果与纯ZnO样品对比, 衍射峰向小角度偏移. 光致发光结果表明, Sn掺杂ZnO薄膜与纯ZnO薄膜均出现紫外发光峰和缺陷发光峰, 但是Sn的掺杂使得ZnO的缺陷发光峰明显增强. 将Sn掺杂ZnO样品在空气中退火后, 其室温气敏性消失, 说明Sn掺杂ZnO样品的室温气敏性可能与其缺陷含量高有关. 采用自由电子散射模型解释了Sn掺杂ZnO薄膜的室温气敏机理.     

Alpha Decay of the Neutron-deficient Isotopes 215,216U

The most neutron-deficient isotopes 215;216U were produced in the complete-fusion reaction 180W(40Ar, 4-5n)215,216U. Evaporation residues recoiled from the target were separated in-flight from the primary beam by the gas-filled recoil separator SHANS and subsequently identified on the basis of correlated -decay chains. Two -decaying states were identified in 216U, one for the ground state and the other for the isomeric state with 8+(h9=2f7=2) configuration. The -decay properties for 215;216U and the systematics of 8+ isomeric state in N =124,126 isotones were investigated.     

1.3 GHz单cell超导射频腔等离子体清洗放电研究(英文)

场致发射限制超导射频腔加速梯度增长。为了减少超导射频腔场致发射,在室温条件下,设计搭建了1.3GHz单cell超导射频腔等离子体清洗实验装置,开展等离子体清洗放电研究。使用CST软件模拟腔中的电磁场分布并且优化外部品质因数得到合适的放电条件。随着压强、前向功率和含氧量的变化,实验探讨了Ar/Ar-O₂放电的物理特征和电子激发温度的变化趋势。残余气体分析结果表明,Ar/O₂等离子体清洗能够消除腔体内表面的碳化物。Field emission limits the accelerating gradient increase in SRF cavities. In order to reduce field emission of SRF cavities, the plasma processing experimental setup of a 1.3 GHz single-cell SRF cavity is designed and built to carry out plasma processing discharge research at room temperature. The electromagnetic field distribution is simulated and the external quality factor is optimized to provide a suitable discharge condition using CST software. It is explored that the physical property of Ar/Ar-O₂ discharge and the variation trend of electron excitation temperature with the changes of pressure, forward power and O₂ content in experiment. The result of residual gas analysis indicates that Ar/O₂ plasma processing can eliminate the carbide of the inner surface of cavity.