Low-frequency internal friction in complex composite strands

Conclusion A method was proposed which makes it possible to study the low-frequency internal friction of complex fibers. This method was used to study the internal friction of complex composite fibers based on PCA and PE. We observed a relaxation process which is typical of the composite and is absent in the pure materials.Translated from Mekhanika Kompozitnykh Materialov, No. 1, pp. 11–15, January–February, 1989.     

Effect of rare-earth oxides on the magnetic properties of anisotropic barium ferrites

The effect of rare-earth oxides on the properties of anisotropic barium ferrites has been studied by x-ray structural and Mössbauer methods. Additions of SrCO₃, as well as SrCO₃ and La₂O₃, SrCO₃ and Pr₆O₁₁, SrCO₃ and Nd₂O₃, SrCO₃ and Sm₂O₃ in amounts of 7.5 mole % Sr and 10 mole % rare-earth element to grade-A barium powder results in the substitution of barium ions by Sr and rare-earth ions; consequently, the energy of magnetic anisotropy changes and the technically important parameters B_r and (BH)_max increase.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 1, pp. 34–39, January, 1989.     

Blind Channel Identification Based on Noisy Observation by Stochastic Approximation Method

A stochastic approximation algorithm for estimating multichannel coefficients is proposed, and the estimate is proved to converge to the true parameters a.s. up-to a constant scaling factor. The estimate is updated after receiving each new observation, so the output data need not be collected in advance. The input signal is allowed to be dependent and the observation is allowed to be corrupted by noise, but no noise statistics are used in the estimation algorithm.     

Asymptotics of collision integral matrix elements in the isotropic case

The method of nonlinear moments, when used to solve the Boltzmann equation, necessitates the calculation of collision integral matrix elements. The matrix elements are hard to calculate numerically, especially at large indices. The asymptotics of the matrix elements are constructed. In terms of the model of pseudopower particle interaction, a formula free of summation is derived. This makes it possible to find the asymptotic behavior of linear and nonlinear elements when two indices are large. For an arbitrary interaction cross section, asymptotic expansions of linear and nonlinear matrix elements in one index are obtained. For Maxwellian molecules, asymptotic formulas are derived for three large indices.     

On the polarizability of a pair of cylinders in a transverse electric field

A sequential scheme for calculating the polarizability of a pair of parallel cylinders with an arbitrary (but fairly symmetric) form is suggested. An infinite set of algebraic equations is derived for coefficients involved in an expression for the potential. The numerical solution of this set makes it possible to find the polarizability with any degree of accuracy. This method is unrelated to the cylinder shape. The electrostatic properties of the cylinders are described in terms of the multipolar polarizability matrix.     

Use of ultrafine-dispersed nanodiamond for selective deposition of boron-doped diamond films

A suspension of ultrafine-dispersed nanodiamond was used for introducing (in particular, selectively) high-density centers of diamond nucleation on various substrates. High-quality doped diamond films to be used as electrochemistry electrodes were deposited from the gas phase in a microwave discharge on certain substrates treated using ultrafine-dispersed nanodiamond. A uniform distribution of nucleation centers with concentrations greater than 10¹⁰ cm^-2 on silicon substrates was obtained. Electrochemical current-potential curves were measured for continuous films. Diamond meshes of different transparency were grown using selective nucleation. Successful production of high-quality doped diamond meshes gives grounds to consider them the most promising electrodes for use in electrochemistry.     

Controlled excitation of resonance self-oscillations in one-dimensional distributed systems

On the basis of the method of equivalent linearization combined with the method of moments, laws of self-oscillation excitation are obtained that provide the modes with maximum intensity of resonance (or quasi-resonance) oscillations in one-dimensional systems with distributed parameters. A restriction of a general type is imposed on the law of excitation. In the particular case of an integral quadratic restriction, the law of excitation leads to the generation of purely harmonic self-oscillations. The use of an extended (multiplicatively stabilizing) control provides the uniqueness and stability of the quasi-optimal mode of self-oscillation.     

Synthesis of a soluble pyrrole copolymer with phenetidine

A new series of copolymers was synthesized through the oxidative polymerization of pyrrole (PY) and o‐phenetidine (PHT) with inorganic oxidants in acidic media. The polymerization parameters including the mixing method of the oxidant with the comonomer, the comonomer ratio, the time, the temperature, the oxidant, the organic medium, and the acid were systematically optimized for the synthesis of copolymers with high yields, intrinsic viscosities, and solubility. The resultant copolymers were characterized by elemental analysis, infrared, ultraviolet–visible, solution high‐resolution ¹H NMR and solid‐state high‐resolution ¹³C NMR, circular dichroism spectroscopy, and cyclic voltammetry. The results showed that the PY observed content in the copolymers was much higher than the PY feed content. The regular variation of the polymerization yield, intrinsic viscosity, solubility, macromolecular structure, and electroactivity of the resulting polymers with the comonomer ratio, together with the complete solubility of a PY/PHT (10/90) polymer in highly polar solvents, indicated the formation of real random copolymers containing both PY and PHT units rather than a mixture of two homopolymers. However, the polymers containing more than 59 mol % PY were not homogeneous copolymers consisting of soluble and insoluble parts. A semiquantitative relationship between the polymerization yield or solubility of the copolymers and the polarity index of the organic solvents was examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2073–2092, 2004     

Synthesis and characterization of new segmented polyurethanes with side‐chain,liquid‐crystalline chain extenders

Liquid‐crystalline, segmented polyurethanes with methoxy–biphenyl mesogens pendant on the chain extender were synthesized by the conventional prepolymer technique and esterification reaction. Two, side‐chain, liquid‐crystalline (SCLC) polyurethanes with mesogens having spacers of six and eight methylene units were prepared. The structures of the mesogenic units and SCLC polyurethanes were confirmed by Fourier transform infrared spectroscopy and ¹H NMR. Polymer properties were also examined by solubility tests, water uptakes, and inherent viscosity measurements. Differential scanning calorimetry studies indicated that the transition temperature of the isotropic to the liquid‐crystalline phase decreased with increasing spacer length. Wide‐angle X‐ray diffraction (WAXD) studies revealed the existence of liquid‐crystalline phases for both SCLC polyurethanes. Polarized optical microscopic investigations further confirmed the thermotropic liquid‐crystalline behaviors and nematic mesophases of both samples. Thermogravimetric analysis displayed better thermal stabilities for both SCLC polymers and indicated that the presence of mesogenic side chains may increase the thermal stability of segmented polyurethanes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 290–302, 2004