坛紫菜对干出和酸雨胁迫的生理响应

以坛紫菜为试验材料,研究不同强度酸雨(pH值分别为5.6、4.5、4.0、3.5)对坛紫菜生理特性的影响.试验中测定了坛紫菜细胞膜透性、抗氧化酶活性及叶绿素荧光参数等生理指标,以比较适当干出和完全浸泡、黑暗和光照条件下酸雨胁迫对坛紫菜生理特性的影响.结果表明:(1)经过不同方式处理的模拟酸雨处理后,适当干出处理的坛紫菜...     

光纤陀螺温控技术的研究

温度变化将严重地影响干涉型光纤陀螺仪(IFOG)系统的零位漂移.本文在初步研究温控技术的基础上,给出一种实用的温控电路,以用于在测试温度变化所引起的零位漂移中进行温度调节与控制.通过在此电路下实测的两者变化关系曲线采取补偿措施,以减小光纤陀螺的零位漂移.     

Time-domain analysis of second-harmonic generation of primary Lamb wave propagation in an elastic plate

Within the second-order perturbation approximation,this paper investigates the physical process of generation of the time-domain second harmonic by a primary Lamb wave waveform in an elastic plate.The present work is performed based on the preconditions that the phase velocity matching is satisfied and that the transfer of energy from the primary Lamb wave to the double frequency Lamb wave is not zero.It investigates the influences of the difference between the group velocities of the primary Lamb wave and the double frequency Lamb wave,the propagation distance and the duration of the primary Lamb wave waveform on the envelope shape of the time-domain second harmonic.It finds that the maximum magnitude of the envelope of the second-harmonic waveform can grow within some propagation distance even if the condition of group velocity matching is not satisfied.Our analyses also indicate that the maximum magnitude of the envelope of the second-harmonic waveform is kept constant beyond a specific propagation distance.Furthermore,it concludes that the integration amplitude of the time-domain second-harmonic waveform always grows with propagation distance within the second-order perturbation.The present research yields new physical insight not previously available into the effect of generation of the time-domain second harmonic by propagation of a primary Lamb wave waveform.     

矿物中药钟乳石的X射线衍射Fourier指纹图谱

研究矿物中药钟乳石X射线衍射Fourier指纹图谱.对10批主产地的钟乳石药材X射线衍射Fourier图谱进行分析,建立钟乳石X射线衍射Fourier指纹图谱,并通过相似度计算,区分钟乳石、其他含钙矿物中药、同种化学试剂CaCO3.主成分相同的矿物中药利用X射线衍射Fourier指纹图谱无法完全区分,但钟乳石与同种化学试剂CaCO3的X射线衍射Fourier图谱区别显著.利用X射线衍射Fourier指纹图谱可以很好的区分含有不同化学成分的矿物药,而对于主成分相同的矿物中药,就不能简单地利用它们的X射线衍射Fourier指纹图谱加以区分,即X射线衍射Fourier指纹图谱仅具有相对的专属性.     

脉冲软X光辐射三种材料的喷射冲量实验研究

 在强光一号脉冲加速器上进行了国内首次的实验室软X光辐射三种材料的喷射冲量研究。结果表明，在能量为(0.2～0.33)keV、平均脉宽为39ns左右的X光辐射下，对灰漆、白漆和硬铝，在能注量分别为(92～152)J/cm²、(115～136)J/cm²和(163～192)J/cm²时，它们的冲量耦合系数分别为(0.61～0.80)Pa·s/(J·cm^-2)、(0.58～0.97)Pa·s/(J·cm^-2)和(0.61～0.84)Pa·s/(J·cm^-2)。     

Effect of Coconut Protein and Xanthan Gum,Soybean Polysaccharide and Gelatin Interactions in Oil-Water Interface

We report on our study of the interactions between coconut protein extracted from coconut meat and three hydrocolloids (gelatin, xanthan gum, and soybean polysaccharide) and their interfacial adsorption and emulsification properties. We used Zeta potential, fluorescence spectroscopy scanning and ITC to investigate the interactions between a fixed concentration (1%) of coconut protein and varying concentrations of hydrocolloid. Through the interfacial tension and interfacial viscoelasticity, the interfacial properties of the hydrocolloid and coconut protein composite solution were explored. The physical stability of the corresponding emulsion is predicted through microstructure and stability analysis. Xanthan gum forms a flocculent complex with coconut protein under acidic conditions. Soy polysaccharides specifically bind to coconut protein. Under acidic conditions, this complex is stabilized through the steric hindrance of soy polysaccharides. Due to gelatin-coconut protein interactions, the isoelectric point of this complex changes. The interfacial tension results show that as time increases, the interfacial tensions of the three composite solutions decrease. The increase in the concentration of xanthan gum makes the interfacial tension decrease first and then increase. The addition of soybean polysaccharides reduces the interfacial tension of coconut protein. The addition of xanthan gum forms a stronger elastic interface film. Emulsion characterization showed that the gelatin-added system showed better stability. However, the addition of xanthan gum caused stratification quickly, and the addition of soybean polysaccharides also led to instability because the addition of polysaccharides led to a decrease in thermodynamic compatibility. This research lays the foundation for future research into coconut milk production technology.     

近红外光谱技术快速鉴别地沟油与食用植物油的研究

地沟油检测是我国食品安全最为关注的话题之一,它给人们的生活健康带来了极大的危害。国内现有的检测手段也仅停留在定性检测水平上,只能确定地沟油的有无,还难以进行定量检测。本实验利用近红外光谱技术与光纤传感技术相结合的新方法对勾兑混合油中地沟油的含量进行了定量分析。将煎炸老油与九三大豆油按照一定的体积比进行勾兑,共计50个样本,采集其近红外透射光谱,分别采用偏最小二乘法(PLS)和BP人工神经网络建立了煎炸老油含量的定量分析模型,校正集决定系数分别为0.908和0.934,验证集决定系数分别为0.961和0.952,均方估计残差(RMSEC)为0.184和0.136,预测均方根误差(RMSEP)都为0.111 6,符合应用要求,同时还结合主成分分析法(PCA)对煎炸老油与食用植物油进行了鉴别,识别准确率为100%。实验研究证明近红外光谱技术不仅可以准确快速的定性分析地沟油, 还能定量的检测地沟油的含量,在油脂的检测方面具有很大的应用前景。     

Study of a millimeter-wave squint indirect holographic algorithm suitable for imaging with large field-of-view

In this paper a millimeter-wave （MMW） squint indirect holographic method is presented, which is suitable for imaging with a large field-of-view. The proposed system employs the squint operation mode to remove the background and twin- image interferences, which achieves a similar effect to off-axis holography but leaves out the large-aperture quasi-optical component. The translational scanning manner enables a large field of view and ensures the image uniformity, which is difficult to realize in off-axis holography. In addition, a corresponding imaging algorithm for the presented scheme is developed to reconstruct the image from the recorded hologram. Some imaging results on typical objects, obtained with electromagnetic simulation, demonstrate good performance of the imaging scheme and validate the effectiveness of the image reconstruction algorithm.     

熔石英后表面坑点型划痕对光场调制的近场模拟

建立了坑点型划痕的旋转抛物面模型, 用三维时域有限差分方法研究了熔石英后表面坑点型划痕随深度、 宽度、 间距以及酸蚀量变化对波长λ =355 nm入射激光的调制.研究表明, 这类划痕调制最强区位于相邻两坑点的连接区, 且越靠近表面调制越强.当其宽深比为2.0---3.5、 坑点间距约为坑点宽度的1/2时, 可获得最大光场调制, 最大光强增强因子(LIEF)为11.53; 当坑点间距大于坑点宽度时, 其调制大为减弱, 相当于单坑的场调制.对宽为60δ (δ =λ/12), 深和间距均为30δ的坑点型划痕进行刻蚀模拟, 刻蚀过程中最大LIEF为11.0, 当间距小于300 nm时, 相邻坑点由于衍射形成场贯通.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.