Synthesis and characterization of polythiophene block copolymer and fullerene derivative capable of “three‐point” complementary hydrogen bonding interactions and their application in bulk‐heterojunction solar cells

We report the synthesis and characterization of a polythiophene block copolymer (P4) selectively functionalized with diaminopyrimidine moieties and a thymine tethered fullerene derivative (F1). Self‐assembly between P4 and F1 through “three‐point” complementary hydrogen bonding is studied by ¹H NMR spectroscopy and differential scanning calorimetry. A large Stern‐Volmer constant (K_SV) of 1.2 × 10⁵ M^?1 is observed from fluorescence quenching experiments, revealing strong complexation between these two components. Solar cells employing P4 and F1 at different weight ratios as active layers are fabricated and tested; corresponding thin film morphologies are studied in detail by optical imaging and atomic force microscopy. Correlations between polymer complex structures, film morphologies, and device performance are discussed. Thermal stability of benchmark poly(3‐hexylthiophene) bulk heterojunction solar cells is found to be improved by the addition of a few weight percent of P4/F1 complexes as compatibilizers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3339–3350     

Copolymerization of styrene and norbornene with β‐diketiminato nickel/methylaluminoxane catalytic system

Styrene–norbornene (S‐N) copolymerizations were carried out using β‐diketiminato nickel complexes CH{C(CF₃)NAr}₂NiBr (Ar = 2,6‐ⁱPr₂C₆H₃, 1 ; Ar = 2,6‐Me₂C₆H₃, 2 ) in the presence of methylaluminoxane. The influence of the comonomer feed content and polymerization temperature on the conversion and composition of the copolymers with the catalytic system was investigated. An increase in the feed ratio of S/N led to an increase in the incorporated styrene content of the resulting copolymer. NMR characterization of the copolymers generated with the catalytic systems showed that the random S‐N copolymers are produced. Differential scanning calorimetric determination of the copolymers shows higher T_g values than polystyrene, and gel permeation chromatographic measurements have shown that the copolymers possess rather narrow molecular weight distributions, suggesting that the copolymerization take place at a single active site. Copyright © 2012 John Wiley & Sons, Ltd.     

热爆炸临界参数的数值解法

本文提出的热爆炸临界参数的数值解法是一种变分方法.这种方法依据的是文献[1]给出的热爆炸临界参数的一个变分原理。数值计算的结果表明,这种方法是一种简便、经济而又精确度较高的方法。     

高压下Pd82Si18合金凝固过程中形成的亚稳相

 使用X射线衍射、差热分析、透射电镜及Ｘ射线能谱分析，研究了Pd₈₂Si₁₈合金在高压下的凝固特点及所形成的相的结构和稳定性。在5.5 GPa压力下以100 K/s的冷却速率淬火，得到了面心立方结构钯硅固溶体（MS-Ⅰ），其点阵常数为a=0.388 3 nm。与钯硅固溶体共存的还有另一未知结构亚稳相（MS-Ⅱ）。在700 K时上述亚稳相转变成平衡相Pd+Pd₃Si。     

Hybrid Optical-Electronic Implementation of Morphological Edge Detection

ＨｙｂｒｉｄＯｐｔｉｃａｌ－ＥｌｅｃｔｒｏｎｉｃＩｍｐｌｅｍｅｎｔａｔｉｏｎｏｆＭｏｒｐｈｏｌｏｇｉｃａｌＥｄｇｅＤｅｔｅｃｔｉｏｎ￥ＹＵＡＮＳｈｉｆｕ；ＺＨＡＮＧＸｕｅｒｕ；ＺＨＡＯＳｈｉｊｉｅ；ＬＩＹａｎ；ＣＨＥＮＬｉｘｕｅ（Ｄｅｐａｒｔｍｅｎｔ...     

球对称激光等离子体中由TE波引起的自生磁场

本文讨论了球对称激光等离子体中的自生磁场,导出了由TE波引起的自生磁场的表示式。这个解与平面等离子体中S偏振波的结果作了对比。按照我们的理论结果,可以解释近来实验上所观察到的自生磁场的行为。 关键词：     

锯齿型与扶手椅型碳化硅纳米管光电性质第一性原理研究

本文基于密度泛函理论计算分析了手性参数为(17,0)、(20,0)、(26,0) (10,10)、(12,12)、(15,15)的碳化硅纳米管的能带图,态密度及主要光学性质。结果表明：锯齿型与扶手椅型碳化硅纳米管均具有明显的半导体性质;在相近直径下,扶手椅型碳化硅纳米管带隙宽度要大于锯齿型碳化硅纳米管的带隙宽度;碳化硅纳米管的光吸收峰在100nm~200nm之间,可用于制作紫外线探测器件。