GC-FTIR和GC-MS联用在环状硫代碳酸酯混合物中的应用

采用GC-FTIR和GC-MS建立环状硫代碳酸酯和环状碳酸酯的分析方法.选用HP-5毛细管色谱柱(30m×320μm×0.25μm),分流比50∶1,进样量1μL,进样口起始温度120C,保持5min,升温速率15℃/min,进样口终止温度270℃.质谱采用EI源,选取Scan模式,扫描范围为50到550m/Z.结果表明GC-FTIR可鉴定出3种环状硫代碳酸酯,而GC-MS可同时鉴定出4种环状硫代碳酸酯.     

技术应用型院校大学物理实验课程教学改革的研究与实践

针对大学物理实验教学目前存在的问题,考虑到物理学科的发展趋势及高等教育改革的基本要求,本着更新物理实验教师的教育思想和教育观念、加强教师的培养、调整教学体系和教学内容、改革传统的教学方法和现有的大学物理实验考核体系和评价体系以及加强实验室管理等原则,对大学物理实验教学进行了研究和实践。     

亚10 μm线宽的投影光刻物镜设计及其成像性能的实验测定

 采用Zemax软件设计出6镜片、数值孔径为0.06、2倍缩小、以405 nm半导体激光器为光源、分辨精度达5 μm、视场12 mm×12 mm 内波像差小于1/4波长、畸变小于0.005%的双远心投影光刻物镜的设计方法。将设计的物镜实物化,并对其光学传递函数(MTF)作精确的实验测定,利用所提出的MTF标准实验测量法,得到该投影物镜的成像性能达亚10 μm线宽。     

STUDY OF OPTICAL PUMPING OF ALKALI ATOMIC BEAM IN STRONG MAGNETIC FIELDS

We have gained a very comprehensive set of results for infrared diffraction (10.6μm wavelength) from fabricated single grooves of reflection with widths in the range of 5μm to 65μm. The experimental results show that the diffraction can still occur when the groove width becomes comparable to or less than the wavelength of the probing light. Variations of the diffraction intensities have a very regular sinusoidal relationship with the polarization angle of the incident light; and the diffraction intensities are the when the incident light is TM polarized. However, the diffraction intensities will be a minimum when the incident light is TE polarized; and the biger the diffraction angle, the higher the rate of change of the diffractive intensity with increasing polarization angle of the incident light.     

Realization of an All-Fibre Self-Organization Intra-Cavity Coherent Erbium-Doped Fibre Laser

An intra-cavity coherent coupling Michelson Er-doped fibre （EDF） laser （MCEDFL） is proposed and demonstrated. Characteristics of the MCEDFL are investigated. It is found that the MCEDFL with a polarizer can be coherent combined effectively. By the experiment based on fibre Bragg gratings （FBGs） with different reflectivity, we find that the reflectivity of the FBG play a vital role in improving the performance of the MCEDFL. This outcome adequately shows many favourable features, such as high efficiency, easy operation, and simple all-fibre configuration.     

射频等离子硫钝化GaAs(100)的表面特性

采用射频等离子方法,对Ga As(100)衬底片表面进行干法硫等离子体钝化,旨在得到性能稳定含硫钝化层。样品经过360℃温度条件下的快速热退火,光致发光(PL)测试表明,钝化后的样品PL强度上升了71%。同时,钝化样品的稳定性测试结果表明,样品放置在实验室空气中30 d,其PL强度未出现明显变化,说明Ga As的等离子体干法硫钝化具有较好的性能稳定性。     

基于多元通讯集中控制器的LED植物促生长智能照明控制系统

LED可以高效地释放特定波长的光线,促进植物光合作用;然而市场上较多采用的植物生长灯缺乏系统化的控制,订制成本高,可靠性和灵活性低;为了解决这些问题,开发了一套LED植物促生长智能照明控制系统;该系统采用集中分布式的架构,拓展了可控制的地域范围和优化了系统的响应能力;特别是系统采用了多元通讯模式,巧妙地融合了多种数据传输方式,其中包括多种远程通讯和局域网络通讯,极大地提高了控制系统的灵活性和可靠性;在该模式下,控制设备中嵌入了可配置的优先级列表,集中控制器实时检测并动态地选择高优先级且连接状态良好的通讯方式;在局域无线组网通讯中,提出了一套具有自愈和自维护功能的系统组网策略,极大地提高了下行网络的稳定程度;最后搭建了实验平台,测试了相关功能,试验结果良好;该控制系统具有高可靠性和高灵活性的特点,适应多种农业现场状况,拥有良好的市场潜力。     

激光诱导Mg等离子体电子温度的实验研究

利用波长为1 064 nm,最大能量为500 mJ的Nd∶YAG脉冲激光器在室温,一个标准大气压下对Mg合金冲击,改变激光能量,得到相应的Mg等离子体特征谱线。分析谱线,发现谱线有不同的演化速率,同时得到了MgⅠ,MgⅡ离子谱线,证明此实验条件下,激光能量足够Mg合金靶材充分电离。选择了相对强度较大的MgⅠ 383.2 nm, MgⅠ 470.3 nm, MgⅠ 518.4 nm三条激发谱线,利用这些发射谱线的相对强度计算了等离子体的电子温度,激光能量为500 mJ时,等离子体温度为1.63×104 K。实验结果表明：在本实验条件下,Mg原子可以得到充分激发;在200～500 mJ激光能量范围内,等离子体温度随着激光能量的降低而衰减,在350～500 mJ激光能量范围内的等离子体温度随激光能量的变化速度十分明显,200～350 mJ时等离子体温度变化速度迅速减缓;激光能量为300 mJ时,谱线相对强度明显减弱,低于350和250 mJ的谱线相对强度,不符合谱线相对强度会随着激光能量提高而上升的变化趋势,证明发生了等离子体屏蔽现象,高功率激光产生的等离子体隔断了激光与材料之间的耦合。此时的等离子体温度明显升高,不符合变化趋势,这是由于在发生等离子体屏蔽现象时,激光能量被等离子体吸收,导致等离子体温度上升。     

First-Principles Calculation of Static Equation of State and Elastic Constants for GaSe

The all-electron full potential augmented plane-wave plus local orbital （APW_Io） method with the local-density approximation （LDA） is used to calculate the static equation of state （EOS） and elastic constants of crystalline GaSe. After the full relaxation of atomic positions, the calculated band structure at ambient pressure is consistent with the experimental data to the extent expected to give the known limits of LDA one-electron energies. The equilibrium lattice parameters found here exhibit the usual LDA-induced contraction. However, constrained with the experimental cell volume, the interlayer separation exhibits an expansion due to the LDA underestimate of the weak interlayer bonding. The calculated values of elastic constants are in good agreement with acoustic measurements. The pressure derivatives of the lattice constants derived from the theoretical elastic constants are in very good agreement with x-ray spectra measurements. Two analytical EOSs have been determined at pressures up to 4.5 GPa. The pressure evolution of the structure indicates that the layer thickness decreases slightly under pressure.     

透镜初级球差的横向剪切干涉条纹研究

利用玻璃平行平板构成简单的横向剪切干涉仪可以观察到单薄透镜形成的准直光束的剪切干涉条纹,由干涉条纹分布求出对应的几何像差和离焦量.用焦距为190 mm的单薄透镜做实验,实验结果与计算机模拟结果符合,说明可以从剪切干涉条纹的分布求出透镜的轴向调整误差和初级球差.