分子印迹壳聚糖膜分离手性苯丙氨酸

以L-苯丙氨酸(L-Phe)为印迹分子,采用相转化法制备了分子印迹壳聚糖膜。分别采用碱液处理和硫酸交联两种方法对膜进行处理,降低了壳聚糖膜的溶胀度,印迹膜内识别位点的结构得以保持。采用FT-IR和SEM对膜的化学组成和结构形态进行了表征。通过渗透实验考察了分子印迹壳聚糖膜和非印迹空白壳聚糖膜对D,L-苯丙氨酸(D,L-Phe)混合物的手性拆分性能,并与空白膜进行了比较。印迹膜的分离因子达到1.43。     

Synthesis of Tetra—Schiff Base Macrocyclic Compound Containing Benzo—12—crown—4

Tetra-Schiff base macrocyclic compound containing benzo-12-crown-4 was synthesized via condensation of 2,6-diformyl-4-methyl-phenol with 4′，5′-diaminobenzo-12-C-4 promoted by proton. The compound was characterized by MS,IR ^1HNMR spectroscopy and elemental analysis.     

羟基自由基引发的马来酸酐聚合反应机理AM1研究

用AM1方法计算了马来酸酐、羟基自由基及其加成产物α-羟基丁二酸酐基自由基的电子结构、电荷分布和键级.应用前线轨道理论和成键三原则研究了羟基自由基引发下马来酸酐聚合过程中α-羟基丁二酸酐基自由基活性中间体参与反应的可能性及其自由基聚合反应机理.计算结果表明:马来酸酐基态分子的HOMO和LUMO分别对应于双键CC的成键π-MO和反键π -MO;马来酸酐的羟基自由基加成反应活化能计算值为55 7kJ/mol;马来酸酐在羟基自由基引发下的自由基聚合产物是链式结构,与实验事实相符.     

2型糖尿病患者血清钙镁与甲状腺激素含量变化及临床意义

为了监测 2型糖尿病人血清钙、镁和甲状腺激素含量 ,分析其临床意义及相关性 ,应用放射免疫分析法测定了 1 1 5例 2型糖尿病及 1 5 0例健康人血清甲状腺激素含量。同时用美国杜邦RXL自动生化仪测定了其血清钙、镁含量。结果表明 ,在 2型糖尿病伴有明显并发症者血镁、FT3水平明显降低 (P <0 0 5 ) ,钙镁两种元素与甲状腺激素水平无明显相关性。 2型糖尿病患者适当补镁对预防其并发症是有益的 ,测定FT3 等可作为判断 2型糖尿病严重程度和估计预后的参考指标。     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

SYNTHESIS OF THE POLYSTYRENE-TYPE ADSORBENTS CONTAINING POLAR GROUPS AND THEIR CAPACITIES IN THE ADSORPTION OF STEVIOSIDE AND GYPENOSIDES

Seven polystyrene-type adsorbents (Ⅰ—Ⅶ) were synthesized by the modification of styrene-divinylbenzene copolymer respectively with hydroxymethyl, aminomethyl, methoxymethyl, phenoxymethyl, (4-hydroxy phenoxy)methyl, (4-acetylphenoxy)methyl, and acetyl groups. Their structures were characterized with chemical methods and physical techniques. The adsorption capacities of the adsorbents to stevioside and gypenosides were determined via batch test in which the HPLC method was used for the analysis of Saponin concentration of solution. The results showed that all the adsorbents could adsorb these saponins to a certain extent, but Ⅵ and Ⅶ had large capacities owing to their moderate polarities.     

羟基—氧钼(Ⅴ)[5,10,15,20—四(4—磺酸基苯基)]卟啉配合物在溶液中的二聚平衡

在25±0.02℃、0.025mol·dm~(-3)KCl介质及磷酸盐缓冲条件下,用光度滴定法研究了羟基-氧钼(V)[5,10,15,20-四(4-磺酸基苯基)]卟啉配合物在水溶液中的二聚平衡,用线性最小平方法确定了平衡模型,求得二聚反应平衡常数pK_el=4.34±0.28,单体的摩尔吸收εm(447um)=1.27×10~4εm(475um)=2.01×10~4;二聚体的摩尔吸收ε_d(447nm)=3.17×10~4,ε_d(475nm)=1.40×10~4。     

Investigation of Isomerization of 2—Seleno—1,3,2—diazaphospholidine Derivatives

For the first time the isomerization of 1,3,2-diazaphospholidine-2-sclenide dervatives in refluxing benzene in the presence of trace water was observed. The structures of isomerized products were determined by IR, ^1H NMR,^31P NMR, elemental analysis and X-ray crystallography. The mechanism of isomerization was also proposed.     

Relationship between the molybdenum phases and the conversion of n-butane over Mo/HZSM-5

The conversion of n-C₄H₁₀ was undertaken on MoO₃/HZSM-5 catalyst at 773–973 K and the phases of molybdenum species were detected by XRD. The XRD results show that bulk MoO₃ on HZSM-5 can be readily reduced by n-C₄H₁₀ to MoO₂ at 773 K and MoO₂ can be gradually carburized to molybdenum carbide above 813 K. The molybdenum carbide formed from the carburization of MoO₂ with n-C₄H₁₀ below 893 K is -MoC_1−x with fcc-structure, while hcp-molybdenum carbide formed above 933 K. During the evolution of MoO₃ to MoO₂ (>773 K) or the carburization of MoO₂ to molybdenum carbide (>813 K), deep oxidation, cracking and coke deposition are serious, in particular at higher reaction temperatures, these lead to the poor selectivity to aromatics. Aromatization of n-C₄H₁₀ can proceed catalytically on both Mo₂C/HZSM-5 and MoO₂/HZSM-5, the distribution of the products for the two catalysts is similar below 813 K, but the activity for Mo₂C/HZSM-5 is much higher than that for MoO₂/HZSM-5.