微波等离子体炬发射光谱法去溶系统性能的研究

用微波等离子体矩（MPT）作激发光源，等离子体的工作气体为氩气，研究了气动雾化进样去溶系统的工作参数对分析性能的影响，探讨了水冷凝与浓硫酸吸收二者协同去溶的相关性，结果表明，OH （Q1带，带头谱线为308.520nm）的发射强度即可判别样品去溶效果。     

硬木热解过程中颗粒内部二次反应的数值研究Ⅱ.数值模拟结果

为了研究生物质（硬木）热解过程中颗粒内部的二次反应，对流化床环境下单颗粒生物质热解模型进行了求解。计算针对典型大颗粒和典型小颗粒在流化床反应器反应条件下的热解过程，对不同大小颗粒内部各种产物的生成、消耗、积累以及逃逸行为进行了定量描述。计算结果表明：对于直径为2mm的小颗粒，颗粒内二次裂解的份额可以忽略，但是对于直径10mm的大颗粒，热争过程中有超过20%的一次焦油参加了颗粒内部二次反应，颗粒内二次裂解显著地改变了热解产物分布，改变了热解产物的品质。     

锐钛相虫蛀状介孔二氧化钛的表征

0IntroductionMesostructuredtitania(TiO2)hasattractedagreatdealofattention,inviewofcontrolleddelivery,catalytic,photocatlytic,orenergyconversionapplica-tions犤1犦.Theuseoftitaniumisopropoxidebis-acetylace-tonateprecursors,combinedwithalkylphosphatean-ionicsurfactantsastemplate,ledtothefirstdocu-mentedpuremesoporousTiO2犤2犦.Insubsequentyears,moresyntheticstrategieshavebeendevelopedusingavarietyofstructure-directingagents,forexample,car-boxylicacids犤3犦,alkylamine犤4犦,aminium犤5犦,blockcop-o…     

IMMOBILIZATION OF POTENTIALLY BIOACTIVE MOIETIES ONTO POLYETHER WITH POLY(ETHYLENE GLYCOL)-SULFONATE SPACER

A new reactive graft copolymer, poly(tetramthylene glycol) - graft-w-propyl sodiumsulfonate-poly(ethylene glycol) (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+), was synthesizedby the cationic polymerization of a-w-bifunctional PEG macromonomer (O?CH_2—PEG——CH_2 CH_2 CH_2 SO_3 Na) and THF. The obtained copolymer exhibits the expected structureas indicated by the result of characterization. Two amino acids (L-arginine, L-tyrosine)were covalently attached to the copolymer after converting the sulfonate group to sulfonylchloride. So the new reactive graft copolymer (PTMG-g-PEG-CH_2CH_2CH_2SO_3~-Na~+) isexpected to be very useful in attachment of potentially bioactive moieties to polymer viaa hydrophilic PEG spacer.     

3, 6-二取代-均三唑并[3, 4-b]-1, 3, 4-噻二唑的合成

研究了2-苯基-1, 2, 3-三唑-4-羧酸(1)与3-烷基/芳基-4-氨基-5-巯基-1, 2, 4-三唑(2a～o)在POCl~3催化下, 脱水缩合得到15个新的3-烷基/芳基-6-(2'-苯基-1', 2', 3'-三唑-4'-基)均三唑并[3,4-b]-1, 3, 4-噻二唑类化合物(3a～o)。     

二茂铁亚胺环钯化合物－－一种新型芳基氯化汞偶联催化剂

发现在催化量二茂铁亚胺环钯化合物催化下，芳基氯化汞可在湿和条件下偶联 ，以中等或高的收率生成联芳烃。对于铑盐不能催化偶联的邻位取代苯基氯化汞和 α－基氯化汞，在此体系中亦可发生偶联。以HMPA为溶剂，在x = 0.025（摩尔分 数）化合物1或2催化下与2.0当量氯化锂存在时，得到最好的催化效果。     

Preparation, Electrochemical Behavior and Electrocatalytic Activity of a Copper Hexacyanoferrate Modified Ceramic Carbon Electrode

A copper hexacyanoferrate modified ceramic carbon electrode （CuHCF/CCE） had been prepared by two-step sol-gel technique and characterized using electrochemical methods. The resulting modified electrode showed a pair of well-defined surface waves in the potential range of 0.40 to 1.0 V with the formal potential of 0.682 V （vs. SCE） in 0.050 mol·dm^-3 HOAc-NaOAc buffer containing 0.30 mol·dm^-3 KCl. The charge transfer coefficient （a） and charge transfer rate constant （ks） for the modified electrode were calculated. The electrocatalytic activity of this modified electrode to hydrazine was also investigated, and chronoamperometry was exploited to conveniently determine the diffusion coefficient （D） of hydrazine in solution and the catalytic rate constant （kcat）. Finally, hydrazine was determined with amperometry using the resulting modified electrode. The calibration plot for hydrazine determination was linear in 3.0 × 10^-6--7.5 × 10^-4 mol·dm^-3 with the detection limit of 8.0 × 10^-7 molodm^-3. This modified electrode had some advantages over the modified film electrodes constructed by the conventional methods, such as renewable surface, good long-term stability, excellent catalytic activity and short response time to hydrazine.     

Theoretical Study on the Isomerization Mechanism of Enol Ester from 2-Acyl-1, 3-cyclohexanediones

The present paper employed density function theory to investigate two reaction pathways for isomerization of enol ester proposed by Yang(path a) and the present authors(path a), respectively. The base catalytic effects of solvent triethylamine on these two reactions were also evaluated. It is demonstrated that path B is more preferable than path a due to low barrier height for the rate-determining step.     

MCM-41介孔分子筛共价键联钴酞菁的制备，表征及性质

采用两种方法将钴酞菁配合物共价联接到介孔分子筛MCM-41的表面：(1) 在MCM-41表面联接含伯胺的有机侧链；(2) 是在MCM-41表面联接含仲胺的有机侧链。含氯磺酸基的钴酞菁与胺反应形成磺酰胺。对得到的主客体化合物用多种物化手段和催化反应进行了表征。结果表明，钴酞菁以单体形式固定在介孔分子筛MCM-41的孔道壁上，在反应条件下固载后的钴酞菁具有高催化活性，同时表现出良好的稳定性，多次重复使用活性没有明显的改变。     

铑(II)催化重氮苄基膦酸酯与芳香亚胺的氮杂环丙烷化反应

铑(II)催化重氮苄基膦酸酯与芳香亚胺反应, 一步合成氮杂环丙烷-2-膦酸酯. 该方法立体定向地得到唯一的反式构型产物, 反应历程是重氮化合物先与亚胺形成叶立德中间体, 然后发生自身环丙烷化反应.