毛细管电泳法高压快速分离分析菠菜中的水溶性维生素

在毛细管电泳法中,通过双模对接高压电源可以获得0～40 kV甚至40 kV以上的超高电压。本研究在40 kV的超高电压下,以纯电解质水溶液为缓冲液,实现了蔬菜中通常含有的8种水溶性维生素(VB1、VB2、VB6、VC、D-泛酸钙、D-生物素、烟酸和叶酸)的快速分离及菠菜样品的定量分析。通过考察电压、缓冲溶液浓度、pH值等因素对分离的影响,确定了优化的实验条件。结果表明,在40 kV高压下,采用25 mmol/L硼砂-硼酸溶液缓冲液(pH 8.8),菠菜中上述8种水溶性维生素在2.2 min内获得了较好的基线分离。用此方法对菠菜中的水溶性维生素进行定量分析,得到了令人满意的结果。水溶性维生素的线性相关系数范围为0.9981～0.9999,检出限为0.2～0.3 mg/L,在菠菜中的平均加标回收率为88.0%～100.6%,峰面积的相对标准偏差(RSD)为1.15%～4.13%。     

新型吲哚咔唑化合物的合成与抗肿瘤活性

设计合成了一系列吲哚咔唑结构的抗肿瘤新化合物. 通过对反应溶剂进行选择和调整, 优化了吲哚咔唑母核合成的反应条件, 使后处理更为简便. 用溴化噻唑蓝四氮唑(MTT)法对所合成的9个目标化合物进行了体外细胞毒活性测试, 结果表明, 化合物4a, 4b, 4d, 4f和4i对人结肠癌HCT116和鼠白血病P388细胞的活性均强于阳性对照ED-571, 其中化合物4f对P388细胞的活性是阳性对照的10倍.     

藏药蕨麻多糖水解单糖的毛细管区带电泳分离研究

以1-萘基-3-甲基-5-吡唑啉酮(NMP)为柱前衍生试剂,探讨了毛细管区带电泳模式下对藏药蕨麻多糖水解液中单糖的分离条件。实验采用58.5 cm×50μm i.d.毛细管(有效长度50 cm),55 mmol/L硼酸盐缓冲溶液(pH=9.46),柱温20℃,分离电压22 kV,进样10 s。该法不加任何添加剂,9种单糖可高效、快速基线分离,实现了对藏药蕨麻多糖水解液中单糖的分离和定量分析,结果令人满意。     

EASC荧光标记和LC-APCI-MS检测环境水样中游离脂肪胺

采用新型荧光标记试剂10-乙基吖啶酮-2-磺酰氯(EASC)作为柱前衍生试剂, 在Hypersil BDS C18反相色谱柱上(4.6 mm×200 mm, 10 μm i.d.), 采用梯度洗脱在20 min内实现了12种EASC-脂肪胺衍生物的快速基线分离. 最佳检测波长为λex/λem=270 nm/430 nm. EASC与常用的Dansyl-Cl相比具有更强的光致发光特性(紫外和荧光): 紫外吸收强度之比为3.2∶1, 相对荧光强度之比为30.0∶1~105.4∶1, 荧光量子效率之比为43.0∶1. 通过荧光检测及离子阱大气压化学电离源的正离子模式获得了胺类组分的准确定量和相应的柱后质谱鉴定. 质谱灵敏度之比为1.6∶1~6.2∶1. 建立的方法对环境水样中脂肪胺类化合物的测定具有快速、准确和重现性良好等优点, 回归系数大于0.9995, 检出限为4.0~12.7 fmol.     

1-(2-萘基)-3-甲基-5-吡唑啉酮衍生试剂的制备及其在高效液相色谱-质谱法测定糖类化合物中的应用

以1-(2-萘基)-3-甲基-5-吡唑啉酮(NMP)作为柱前衍生试剂,建立了简单、灵敏的糖类组分的反相高效液相色谱测定方法。NMP与糖在氨为催化剂的条件下,于70 ℃下反应可获得稳定的衍生产物。在Hypersil ODS 2反相色谱柱上,实现了8种单糖的基线分离。衍生物线性相关系数均大于0.9985,检出限为0.58～1.1 pmol。利用柱后在线串联质谱的电喷雾电离正离子模式监测,获得了各组分的质谱定性及裂解规律,特别是m/z 473的特征碎片离子可作为单糖NMP衍生物的判定依据。与1-苯基-3-甲基-5-吡唑啉酮(PMP)相比,NMP对糖的衍生化具有灵敏、简单、质谱裂解规律性强、重现性好等优点。该方法用于测定油菜花粉多糖中的单糖组成,结果令人满意。     

偶氮胂Ⅲ的电喷雾质谱行为

采用电喷雾质谱法研究了偶氮胂Ⅲ离子化过程. 结果发现,偶氮胂Ⅲ易于在电喷雾电离过程中通过去质子化作用形成带有单电荷或双电荷负离子. 考察了酸度和醋酸根等离子对偶氮胂Ⅲ电喷雾电离的影响. 结果表明,偶氮胂Ⅲ在弱酸性条件下有利于形成负离子. 提出了偶氮胂Ⅲ在电喷雾电离源中通过去质子化作用形成负离子的可能机理,并用串联质谱法研究了所形成不同价态离子的裂解规律. 结果表明,电喷雾串联质谱法能方便快捷地研究偶氮胂Ⅲ的电离行为和所形成不同价态离子的性质,其检测限达0.74×10 -15 g.     

Study on colon-specific 5-Fu pH-enzyme Di-dependent chitosan microspheres

Colon-specific drug delivery systems (CDDS) can improve the bioavailability of drug through the oral route. A novel formulation for oral administration using pH-enzyme Di-dependent chitosan mcirospheres (MS) and 5-Fu as a model drug has been investigated for colon-specific drug delivery by the emulsification/chemical cross-linking and coating technique, respectively. The influence of polymer concentration, ratio of drug to polymer, the amount of crosslinking agent and the stirring speed on the encapsulation efficiency, particle size in microspheres were evaluated. The best formulation was optimized by an orthogonal design. Drug release studies under conditions mimicking stomach to colon transit have shown that the drug was protected from being released in the physiological environment of the stomach and small intestine. The plasma concentrations of 5-Fu after oral administration of coated chitosan MS to rats were determined and compared with that of 5-Fu solution. The in vivo pharmacokinetics study of 5-Fu loaded pH-enzyme Di-dependent chitosan MS showed sustained plasma 5-Fu concentration-time profile. The in vitro release correlated well with the pharmacokinetics profile. The results clearly demonstrated that the pH-enzyme Di-dependent chitosan MS is potential system for colon-specific drug delivery of 5-Fu.     

Synthesis, structures, electrochemistry and electrocatalysis of two novel copper(II) complexes constructed with aromatic polycarboxylates and dipyrido[3,2-d:2′,3′-f]quinoxaline

Two novel coordination polymers [Cu₃(1,3-BDC)₄(Dpq)₂] (1) and [Cu₂(BTC)(OH)(Dpq)₂] · H₂O (2), have been hydrothermally synthesized by self-assembly of aromatic polycarboxylate ligands 1,3-H₂BDC (1,3-H₂BDC = 1,3-benzenedicarboxylate) or H₃BTC (H₃BTC = 1,3,5-benzenetricarboxylate), chelating ligand Dpq (Dpq = dipyrido[3,2-d:2′,3′-f]quinoxaline), and copper chloride. X-ray diffraction analysis reveals that each trinuclear Cu^II cluster is bridged by two coordination modes of 1,3-BDC ligands to form one-dimensional (1-D) chain structure in complex 1. Complex 2 possesses a two-dimensional (2-D) layer network composed of dinuclear [Cu₂(OH)(Dpq)₂] unit and bridging ligand BTC. The adjacent chains for 1 or the adjacent layers for 2 are further linked by π-π stacking interactions to form the three-dimensional (3-D) supramolecular frameworks. Moreover, the electrochemical properties of the two copper(II) complexes bulk-modified carbon paste electrodes (Cu-CPEs: 1-CPE and 2-CPE) have been studied, and the results indicate that both Cu-CPEs give one-electron quasi-reversible redox waves in potential range of 600 to −400 mV due to the metal copper ion Cu(II)/Cu(I). The Cu-CPEs have good electrocatalytic activities toward the reduction of nitrite and bromate in 0.1 M pH 2 phosphates buffer solution, and have remarkable long term stability and especially good surface renewability by simple mechanical polishing in the event of surface fouling, which is important for practical application.     

两个基于[Fe(bpca)(CN)3]-的一维3d-4f异金属配合物的合成和晶体结构

以[(bpca)Fe(CN)3]-(bpca=二(2-吡啶羰基)酰胺阴离子)为构筑基元,设计合成了2个新颖的3d-4f异金属配合物,{[(bpca)Fe(CN)3Pr(H2O)5]Cl2}n(1)和{[(bpca)2Fe2(CN)6Pr(H2O)6]Cl·4H2O}n(2),并测定了它们的晶体结构.化合物1的晶体属正交晶系,Pnma空间群;而化合物2属三斜晶系,P1空间群.在这2个化合物中,[(bpca)Fe(CN)3]-和[Pr(H2O)x]3 (1,x=5;2,x=6)交替排列形成一维链状结构,并通过π-π堆积作用、氢键作用及分子间短距离相互作用形成三维网络结构.     

Study on the Relation between Several Metal Ions and the Growth Metabolism of a Symbiotic Fungus of Sesarma bidens

对一株双齿相手蟹肠道共生真菌Sporothrix sp.(ZJSEF -7),测定了12种金属离子对该菌生长代谢的影响.结果表明,Fe3+、K+、Mn2+、Mg2+、Ca2+和Sb3+可明显促进菌体的生长;Cu2+、Sn2+和pb2+对菌体生长没有明显的影响;Fe2+对菌体生长有强的抑制作用;Al3+和Zn2+完全抑制菌体生长.相手蟹共生菌对部分重金属显示了一定的抗性和强的化学防御功能,深入研究其作用机制,将有助于了解相手蟹共生菌的生物学本质及其生态学作用,对于保护红树林生态环境具有重要的意义.