紫外光引发LDPE膜接枝含氟丙烯酸酯的研究

通过紫外光引发表面接枝聚合反应的方法 ,把含氟丙烯酸酯单体R 5 6 1 0引到LDPE薄膜上 .对经丁酮抽提后的接枝膜进行FTIR、ESCA、SEM和DSC等表征 ,证实含氟聚合物以化学键的方式接枝在LDPE基体膜上 .在一定范围内 ,增加紫外光强、引发剂和单体浓度以及反应温度等均有利于提高接枝率 .经计算R 5 6 1 0的紫外光引发接枝聚合反应总活化能为 5 4 2kJ mol.接枝膜的接触角随着接枝率的提高逐步增大 ,直至趋于恒定 .作者提出接枝膜存在一个在接触角测定时影响基体膜与探测水滴相互作用过程的边界层 .当接枝率较低、接枝层厚度小于边界层临界厚度时 ,基体LDPE影响接触角的大小 ,但随着接枝率提高 ,接枝层逐渐变厚 ,氟聚合物层对接触角的贡献逐渐占优势 ,导致接触角随之增大 .当接枝率超过一定值以后 ,接枝层厚度超过边界层临界厚度 ,接枝层对接枝膜的接触角起全部贡献 ,接触角测定值随之稳定     

Determination of Phenolic Glucosides in Gentiana piasezkii by Capillary Zone Electrophoresis

A capillary zone electrophoretic method has been developed for the quantitative analysis of five phenolic glucosides, 6′-O-vanilloylarbutin (VA), 7-O-feruloylorientin (FE), lutonarin (LN), isoorient (IO) and luteolin (LL), in Gentiana piasezkii with UV detection at 270 nm. 7-O-β-D-glucosyl-coumarin was selected as the internal standard. The applied voltage was 15 kV and the capillary temperature was kept constant at 25 °C. The effect of pH, the concentration of methanol and boric acid on migration were studied systematically. Optimum separation was achieved with 200 mM boric acid buffer at pH 9.50 containing 10% (v/v) methanol. Regression equations revealed good linear relationship between the peak area ratio of each compound and internal standard and its concentration. The correlation coefficients were 0.9975, 0.9997, 0.9998, 0.9998 and 0.9988 for VA, FE, LN, IO and LL, respectively. The relative standard deviations of migration time and the peak area ratio of each analyte and internal standard were <1.78% and 4.93%, respectively. The contents of the five compounds in Gentiana piasezkii were successfully determined with satisfactory repeatability and recovery.     

Large heteropolymetalate complexes formed from lanthanide (Y, Ce, Pr, Nd, Sm, Eu, Gd), nickel cations and cryptate [As4W40O140]: synthesis and structure characterization

A new family of heteropolytungstate complexes (NH₄)₂₁[Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·xH₂O(Ln=Y, Ce, Pr, Nd, Sm, Eu, Gd) were prepared by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O with NiCl₂·6H₂O and Ln(NO₃)₃·xH₂O at pH≈4.5. The crystal structures of (NH₄)₂₁[Gd(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·51H₂O was determined by X-ray diffraction analysis and element analysis. The compound crystallizes in the monoclinic space group P2₁/n with a=19.754(3), b=24.298(4), c=39.350(6) Å, β=100.612(3)°, V=18564(5) ų, Z=2, R1(wR₂)=0.0544(0.0691). The central site S1 and two opposite sites S2 of the big cyclic ligand [As₄W₄₀O₁₄₀]²⁸⁻ are occupied by one Ln³⁺and two Ni²⁺, respectively, each site supply four O_d coordinating to metal ion, another one water molecule and other five water molecules coordinate, respectively, to Ni²⁺and Ln³⁺. Polyanion [Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]²¹⁻ has C_2v symmetry. IR and UV–vis spectra of [NaAs₄W₄₀O₁₄₀]²⁷⁻ of the title compounds are discussed.     

γ-[SiW10O36]8-夹心型稀土元素单取代多酸化合物的合成与表征

利用缺位填充法合成了12个γ-[SiW10O36]8-夹心型稀土元素单取代多酸化合物K13[Ln(SiW10O36)2]·nH2O(Ln=La3+,Ce3+,Pr3+,Nd3+,Sm3+,Eu3+,Gd3+,Tb3+,Dy3+,Ho3+,Er3+,Yb3+).通过元素分析确定其组成,由红外光谱、紫外-可见吸收光谱、循环伏安及室温磁化率测定结果确认稀土离子与γ-[SiW10O36]8-相配位;183WNMR及荧光光谱结果则表明,稀土离子处于2个γ-[SiW10O36]8-构成的八配位环境中,标题化合物具有夹心型D2d对称性结构.     

Surface-enhanced Raman scattering in the ultraviolet spectral region: UV-SERS on rhodium and ruthenium electrodes

We report the first observation of surface-enhanced Raman scattering (SERS) excited with ultraviolet (UV) light from transition metal electrodes. Adsorbed pyridine and SCN- on rough rhodium (Rh) and ruthenium (Ru) electrodes, respectively, have been studied using 325 nm laser excitation. In contrast, the best enhancers in the visible and near infrared, silver and gold, do not produce UV-SERS. The experimental data of UV-SERS are in agreement with our preliminary theoretical calculation based on the electromagnetic enhancement mechanism. The enhancement factor is about 2 orders of magnitude for the Rh and Ru electrodes when they are excited at 325 nm.     

Electrochemical and surfaced-enhanced Raman spectroscopic investigation of CO and SCN- adsorbed on Au(core)-Pt(shell) nanoparticles supported on GC electrodes

Core-shell Au-Pt nanoparticles were synthesized by using a seed growth method and characterized by transmission electron microscopy, X-ray diffraction, and UV-vis spectroscopy. Au(core)-Pt(shell)/GC electrodes were prepared by drop-coating the nanoparticles on clean glassy carbon (GC) surfaces, and their electrochemical behavior in 0.5 M H2SO4 revealed that coating of the Au core by the Pt shell is complete. The electrooxidation of carbon monoxide and methanol on the Au(core)-Pt(shell)/GC was also examined, and the results are similar to those obtained on a bulk Pt electrode. High quality surface-enhanced Raman scattering (SERS) spectra of both adsorbed CO and thiocyanate were observed on the Au(core)-Pt(shell)/GC electrodes. The potential-dependent SERS features resemble those obtained on electrochemically roughened bulk Pt or Pt thin films deposited on roughened Au electrodes. For thiocyanate, the C-N stretching frequency increases with the applied potential, yielding two distinctly different dnu(CN)/dE. From -0.8 to -0.2 V, the dnu(CN)/dE is ca. 50 cm(-1)/V, whereas it is 90 cm(-1)/V above 0 V. The bandwidth along with the band intensity increases sharply above 0 V. At the low-frequency region, Pt-NCS stretching mode at 350 cm(-1) was observed at the potentials from -0.8 to 0 V, whereas the Pt-SCN mode at 280 cm(-1) was largely absent until around 0 V and became dominant at more positive potentials. These potential-dependent spectral transitions were attributed to the adsorption orientation switch from N-bound dominant at the negative potential region to S-bound at more positive potentials. The origin of the SERS activity of the particles is briefly discussed. The study demonstrates a new method of obtaining high quality SERS on Pt-group transition metals, with the possibility of tuning SERS activity by varying the core size and the shell thickness.     

环氧化橡胶及其合金的研究与应用

综述了国内外环氧化橡胶及其合金的研究现状和应用趋势,重点介绍了环氧化天然橡胶、环氧化聚丁二烯、环氧化苯乙烯-丁二烯-苯乙烯三嵌段共聚物及其合金的优点,以及影响其物理机械性能的因素和环氧化橡胶的发展方向。     

(Y,Gd)VO_4∶Eu~(3+)的紫外-真空紫外发光特性

用高温固相法合成了Y1-xGdxVO4∶Eu3 (0≤x≤1)系列单相样品并研究了其发光特性。在254nm激发下,观察到最大强度位于619nm的红色发射峰且其强度在Y/Gd=0.4/0.6时达到最大。在147nm激发下的发射峰与紫外下的一致,发射强度也是在Y/Gd=0.4/0.6时达到最大,大约是商用(Y,Gd)BO3∶Eu3 荧光体的65%。619nm监控下的真空紫外激发光谱由峰值位于158nm,204nm,247nm以及300nm的系列激发带组成,归属于钒酸根的基质吸收以及Gd3 、Y3 和Eu3 的电荷迁移带吸收。相对(Y,Gd)BO3∶Eu3 中Eu3 占据中心对称格位,(Y,Gd)VO4∶Eu3 中Eu3 占据非中心对称格位,其真空紫外下光谱色纯度更好。色坐标分别为(0.632,0.355),(0.672,0.328)。     

Reactivity of monolayer-protected gold nanoclusters at dye-sensitized liquid/liquid interfaces

Hexanethiolate monolayer-protected gold nanoclusters (MPCs) were used as redox quenchers at the polarizable water/1,2-dichloroethane (DCE) interface. Photocurrent responses originating from the heterogeneous quenching of photoexcited water soluble porphyrin complexes by MPCs dissolved in the DCE phase were observed. As MPCs can function as both electron acceptors and donors, the photocurrent results from the superposition of two simultaneous processes, which correspond to the oxidation and reduction of MPCs. The magnitude of the net photocurrent is essentially determined by the balance of the kinetics of these two processes, which can be controlled by tuning the Galvani potential difference between the two phases. We show that, within the available potential window, the apparent electron-transfer rate constants follow classical Butler-Volmer dependence on the applied potential difference.     

A combinatorial approach to study solvent-induced self-assembly of mixed poly(methyl methacrylate)/polystyrene brushes on planar silica substrates: effect of relative grafting density

This article reports the study of the effect of relative grafting densities of two polymer chains on solvent-induced self-assembly of mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes through a combinatorial approach. Gradient-mixed PMMA/PS brushes were synthesized from a gradient-mixed initiator-terminated monolayer by combining atom transfer radical polymerization (ATRP) and nitroxide mediated radical polymerization (NMRP) in a two-step process. The gradient-mixed initiator-terminated monolayer was fabricated by first formation of a gradient in density of an ATRP initiator through vapor diffusion followed by backfilling of an NMRP-initiator-terminated trichlorosilane. After treatment of a gradient-mixed brush whose PS Mn was slightly lower than that of PMMA with glacial acetic acid, a selective solvent for PMMA, relatively ordered nanodomains were observed in the region where the ratio of PS to PMMA grafting density (number of polymer chains/nm2) was in the range from 0.67 to 2.17 and the overall grafting density was approximately 0.85 polymer chains/nm2. Contact angle hysteresis were high (> or =40 degrees ) in this region and XPS studies confirmed that the PMMA chains were enriched at the outermost layer. The nanodomains are speculated to be of a micellar structure with PS chains forming the core shielded by PMMA chains.