Schiff碱配合物模拟酶催化性能的温度效应研究

研究了新型Schiff碱双锰配合物在模拟酶催化亚碘酰苯单加氧化环已烷反应及 被亚碘酰苯氧化破坏反应中的温度效应。结果表明，在模拟酶催化反应体系中同时 存在催化环已烷单加氧反应及催化剂的氧化破坏反应；催化反应速率及氧化破坏反 应速率均随反应温度升高有规律地增大，但氧化破坏反应比催化反应对反应温度更 敏感；催化反应总产率一般随反应温度升高而降低；最适宜的反应温度为25 ℃。     

Analysis of effective molecular diffusion rates for verteporfin in subcutaneous versus orthotopic Dunning prostate tumors

Photosensitizer biodistribution change inside tissue is one of the dominant factors in photodynamic therapy efficacy. In this study, the pharmacokinetics of a benzoporphyrin derivative (BPD), delivered in verteporfin for injection formulation, have been quantified in the rat Dunning prostate tumor MAT-LyLu model, using both subcutaneous and orthotopic sites. Blood plasma sampling indicated that BPD had a bi-exponential metabolic lifetime in vivo, with the two lifetimes being 9.6 min and 8.3 h. The spatial distributions in the tumor were quantified as a function of distance from the perfused blood vessels, using fluorescence histologic images of the tumor. A fluorescent vascular marker was used to obtain locations and shapes of perfused capillaries at a wavelength of emission different from that of BPD and to allow colocalized images to be acquired of vessel and BPD locations. Using the BPD fluorescence images obtained 15 min after intravenous administration, a forward finite-element solution to the diffusion equation was used to predict the drug distribution by matching the fluorescence intensity images observed microscopically. An inverse solver was used to minimize the root mean square error between the image of simulated diffusion and the experimental image, resulting in estimation of the diffusion coefficient of BPD in the tumor models. Effective diffusion coefficients were 0.88 and 1.59 microm2/s for the subcutaneous and orthotopically grown tumors, respectively, indicating that orthotopic tumors have significantly higher vascular extravasation rates as compared with subcutaneous tumors. This analysis supports the hypothesis that leakage rates of the photosensitizer vary considerably. Thus, although varying the time between injection and optical irradiation may be used to vary the targeting between vascular and less vascular areas, the precise time of treatment will depend on the nature of the permeability of the vasculature in the tissue being treated.     

Chemical fixation of CO2 with highly efficient ZnCl2/[BMIm]Br catalyst system

The chemical fixation of CO₂ with mono-substituted terminal epoxides or cyclohexene oxide to form cyclic carbonates under the ZnCl₂/[BMIm]Br catalyst system without using additional organic solvents was achieved in excellent selectivity (>98%) and TOF (5410 h⁻¹) and the catalyst could be used six times almost without losing its catalytic activity and selectivity. Besides, the pure cis-cyclic carbonate of cyclohexene oxide was obtained in this catalyst system.     

Solution-phase synthesis and electrochemical hydrogen storage of ultra-long single-crystal selenium submicrotubes

Ultra-long single-crystalline trigonal selenium submicrotubes were synthesized using a facile one-step solution-phase approach with the assistance of nonionic surfactant Polyoxyethylene(20)sorbitan monolaurate (Tween-20), which turned out to be significant for the formation of ultra-long Se submicrotubes. XRD, Raman, SEM, and TEM were adopted to characterize the morphology, structure and phase composition of the as-prepared Se products. It was found that the length of the obtained Se submicrotubes was over 100 microm. By variation of the experimental parameters, the t-Se spheres, nanowires, and broken microtubes can be prepared. The possible growth mechanism of the ultra-long selenium submicrotubes was explained. In addition, we have also demonstrated that the synthesized ultra-long t-Se submicrotubes using the Tween-20-assisted approach can electrochemically charge and discharge with the high capacity of 265 mAh/g (corresponding to 0.97 wt % hydrogen in SWNTs) under normal atmosphere at room temperature. Cyclic voltammetry was adopted to investigate the adsorption-oxidation behavior of ultra-long selenium submicrotubes. It was observed that the morphology of the synthesized selenium products had a remarkable influence on their capacity of electrochemical hydrogen storage. These differences in hydrogen storage capacity are likely due to the size and density of tubes as well as the microcosmic morphology of different Se samples. The as-obtained ultra-long Se submicrotubes are expected to find wide applications in hydrogen storage, high-energy batteries, and optoelectronic, biologic, and catalytic fields as well as in the studies of structure-property relationships. This simple Tween-assisted approach might be extended to the preparations of one-dimensional nanostructures of tellurium and other anisotropic materials.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.     

脯氨酸催化的甲基酮与a-酮酸酯间的不对称Aldol反应

以脯氨酸为催化剂，实现了甲基酮与a-酮酸酯间的不对称Aldol反应，以43%-93%的产率和最高达81％的ee得到多种a-羟基酸酯。空间效应看来是影响反应活性和选择性的一个重要因素。丙酮表现出比丁酮高的反应活性，而在某些情况下 丁酮则呈现更高的对映选择性。     

配合物Cu(phen)2 (dca)2的合成及晶体结构

合成了配合物Cu(phen)2 (dca)2(phen=C12H8N2为1,10-邻菲啰啉,dca-为二氰基氨基阴离子),用IR对其结构进行了初步表征,并测定了配合物的晶体结构.该晶体属单斜晶系,空间群为P21/c;晶胞参数a=0.8869(2)nm,b=1.4691(2)nm,c=1.9298(2)nm,β=100.90(1)°;V=2.4691(8)nm3,Z=4,F(000)=1132.00,Dc=1.496g/cm3,R=0.051,RW=0.068.中心铜(Ⅱ)离子分别与两个phen中的四个N原子和两个dca-的两个N原子配位,形成六配位的变形八面体结构.     

间接原子吸收法测定乳酸环丙沙星

研究了在弱酸性介质中，乳酸环丙沙星与雷氏盐定量生成缔合物的反应条件，以及通过原子吸收法测定沉淀中Cr的含量而间接测定乳酸环丙沙星含量的分析方法。线性范围在5－40mg/L，相对标准偏差为2．5％，回收率在98％－101％之间。     

Synthesis and Adsorption Property of Two Polymeric Adsorbents with Pendent Ether Bonds

Two polymeric adsorbents, poly(methyl p-vinylbenzvl ether) and oolv(ohenvl p-vinylbenzyl ether), were synthesized from chloromethylated polystyrene, Their adsorptionproperty for phenol in hexane solution was investigated. The results showed that the twoadsorbents adsorb phenol from hexane solution through hydrogen-bonding and π-π stacking interaction.     

Mixed-valent diruthenium diphosphonate with kagomé structure

This paper reports the first example of diruthenium phosphonate with kagomé structure, namely, [NH3(CH2)4NH3][Ru2(hedpH(0.5))2].2H2O (hedp = 1-hydroxyethylidenediphosphonate). The compound contains kagomé layers that are linked by very strong hydrogen bonds into a nanoscale kagomé structure. Ferromagnetic interactions are mediated between the paramagnetic diruthenium units.