电化学DNA生物传感器定量检测根癌农杆菌终止子基因片段

通过自组装法及共价法固定单链脱氧核糖核酸(ssDNA),制备了电化学DNA生物传感器。将巯基丙酸(MPA)自组装于金电极表面形成单分子膜,再利用1-(3-二甲氨基丙基)-3-乙基碳二亚胺盐酸盐(EDC)和N-羟基琥珀酰亚胺(NHS)的活化作用将ssDNA探针序列固定于金电极表面。将ssDNA修饰的电极与待测溶液中人工合成的转基因食品中常有的根癌农杆菌终止子(NOS)基因片段进行杂交,在[Fe(CN)6]3-/4-溶液中进行循环伏安和电化学阻抗谱扫描,表征ssDNA固定及杂交过程。优化了ssDNA固定条件。待测溶液中DNA浓度在1.0×10-7～1.0×10-10mol/L范围时,其浓度的对数值和ssDNA/Au电极与dsDNA/Au电极峰电流差值的变化值呈线性相关关系,相关系数为0.9822,检出限为8.1×10-11mol/L。     

Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding

It is still a great challenge to achieve high selectivity of CH₄ in CO₂ electroreduction reactions (CO₂RR) because of the similar reduction potentials of possible products and the sluggish kinetics for CO₂ activation. Stabilizing key reaction intermediates by single type of active sites supported on porous conductive material is crucial to achieve high selectivity for single product such as CH₄. Here, Cu₂O(111) quantum dots with an average size of 3.5 nm are in situ synthesized on a porous conductive copper-based metal–organic framework (CuHHTP), exhibiting high selectivity of 73 % towards CH₄ with partial current density of 10.8 mA cm⁻² at −1.4 V vs. RHE (reversible hydrogen electrode) in CO₂RR. Operando infrared spectroscopy and DFT calculations reveal that the key intermediates (such as *CH₂O and *OCH₃) involved in the pathway of CH₄ formation are stabilized by the single active Cu₂O(111) and hydrogen bonding, thus generating CH₄ instead of CO.     

含LiClO4的接枝聚合物网络的结构,形态与离子导电性能研究

聚合物网络快离子导体成膜后有良好的机械强度、尺寸稳定性,但室温电导率稍偏低。本文通过大单体技术合成兼具优良室温电导率(σ_(298K)=4.8×10~(-5)S·cm~(-1))与机械强度的接枝聚合物网络快离子导体,并研究了网络结构、形态与离子导电性之间的关系。 1 实验部分 1.1 试剂及精制 试剂均为化学纯。分子量为800与2000的聚氧化乙烯(PEO800,     

Pt/TiO2光催化分解甲酸制氢反应的原位红外光谱研究

用原位红外光谱研究了无氧条件下Pt/TiO2光催化甲酸制氢反应机理.结果表明,物理吸附的甲酸物种在光催化反应过程中向甲酸根离子转化,而甲酸根离子则逐渐向碳酸盐物种转化.水蒸气的添加显著促进了甲酸在Pt/TiO2上光催化反应的进行,并提高了产氢效率.提出了该光催化反应的可能机理.     

植物样品中痕量氟的离子色谱法分析

建屯了碱熔法/离子色潜法测定植物样品中痕量氟的分析方法.样品于镍坩锅中500 ℃碱熔融后,经溶解、过滤,进样分析.氟离子经Metrosep A Supp 5阴离子交换柱分离,化学抑制电导检测.氟离子的线性范围为0.005～50 mg/L,相对标准偏差为5.3%,氟的检出限为0.01 mg/kg.该法适合于批量植物样品中痕量氟的测定.     

重要传感材料荧光共轭聚合物PPESO3的一种新的简便合成路线

本文提出了一种新的简便得多的合成路线, 既避免了BBr3的使用, 又简化了反应步骤, 使PPESO3的合成简单易行, 为更广泛地对其进行研究与应用提供了便利条件. 此外, 本文还研究了PPESO3与非离子表面活性剂(聚乙烯吡咯烷酮, PVP)之间的相互作用, 结果表明, PVP与PPESO3形成了稳定的络合体, 可以有效地打破聚合物在水溶液中的聚集, 提高荧光量子产率.     

Helical supramolecular assemblies of {2,4,6-[Cp*Rh(E2-1,2-C2B10H10)(NC5H4CH2S)]3(triazine)} (E = S, Se) shaped by Cp*-Toluene-Cp* pi-stacking forces and BH-pyridine hydrogen bonding

Polycarborane-substituted molecules [Cp*Rh{E 2C 2(B 10H 10)}] 3(tpst) [E = S ( 2a), Se ( 2b)] were synthesized and characterized. 2a and 2b form toluene solvates in the solid state showing infinitely connected [( 2a, b)-(toluene)] infinity helices. The chains of these supramolecules are held together by Cp*-toluene-Cp* pi-stacking interactions of two of the three Cp* ligands of the bell-shaped 2a and 2b molecules. Unconventional BH (delta-)-pyridyl (delta+) aromatic hydrogen bonding enforces the bell-shapes of the molecular units, and the Cp* conformations are expected to induce the supramolecular structures.     

气相色谱-质谱法测定动物组织中残留的10种β2-兴奋剂

采用同位素稀释法并结合固相萃取技术,建立了动物组织中马布特罗、特布他林、卡布特罗、克伦特罗、西马特罗、沙丁胺醇、clenpenterol、苯氧丙酚胺、班布特罗、莱克多巴胺等10种β2-兴奋剂残留的气相色谱-质谱(GC-MS)检测方法。动物组织中添加同位素内标D9-克伦特罗、D3-沙丁胺醇、D5-莱克多巴胺,经无水乙醇提取、正己烷脱脂、SLS离子交换固相萃取柱净化后,用双三甲基硅基三氟乙酰胺+1%三甲基氯硅烷衍生,再进行GC-MS测定,内标法定量。结果表明,动物组织中添加2.0～10.0 μg/kg水平的β2-兴奋剂,回收率为72.8%~110.3%,相对标准偏差为1.2%~11.3%,最低检测限为0.5～1.0 μg/kg。     

双氮桥联1,10-菲咯啉大环化合物分子构型的从头算研究

应用规范不变原子轨道法(GIAO)在RHF/6-31G**和B3LYP/6-31G**水平上计算了质子化双氮桥联1,10-菲咯啉大环化合物(H4HAPP2+)C2h和C2h构型的1HNMR,并用TDDFT法计算了H4HAPP2+电子光谱.结果表明,B3LYP/6-31G*优化的C2h构型为较优构型,经谐振频率验证无虚频,C2h构型是H4HAPP2+合理的对称性构型.     

Theoretical investigation of the reactions of La atom and La<Superscript>+</Superscript> cation with carbonyl sulfide

The potential energy surfaces for the La+SCO and La⁺+ SCO reactions have been theoretically investigated by using the DFT (B3LYP/ECP/6-311+G(2d)) level of theory. Both ground and excited state potential energy surfaces (PES) are discussed. The present results show that the reaction mechanism is insertion mechanism both along the C-S and C-O bond activation branches, but the C-S bond activation is much more favorable in energy than the C-O bond activation. The reaction of La atom with SCO was shown to occur preferentially on the ground state (doublet) PES throughout the reaction process, and the experimentally observed species, have been explained according to the mechanisms revealed in this work. While for the reaction between La⁺ cation with SCO, it involves potential energy curve-crossing which dramatically affects reaction mechanism, and the crossing points (CPs) have been localized by the approach suggested by Yoshizawa et al. Due to the intersystem crossing existing in the reaction process of La⁺ with SCO, the products SLa⁺(η²CO) and OLa⁺(η²CS) may not form. This mechanism is different from that of La + SCO system. All our theoretical results not only support the existing conclusions inferred from early experiment, but also complement the pathway and mechanism for this reaction.