高效液相色谱-质谱联用法测定饮料中的苯甲酸含量

建立了高效液相色谱-质谱联用法检测饮料中的苯甲酸.选用ZORBAX XDB-C18柱(50mm×2.1mm,3.5μm)为分析柱,流动相为乙腈-水,梯度洗脱,流速为200μL·min-1;质谱条件选用气动辅助电喷雾离子源(ESI),检测方式为负离子多离子反应检测(MRM);苯甲酸校准曲线线性范围为1-500μg/L;方...     

Multiparty-controlled teleportation of an arbitrary GHZ-class state by using a d-dimensional (N+2)-particle nonmaximally entangled state as the quantum channel

We present a scheme for multiparty-controlled teleportation of an arbitrary high-dimensional GHZ-class state with a d-dimensional (N+2)-particle GHZ state following some ideas from the teleportation (Chinese Physics B, 2007, 16: 2867). This scheme has the advantage of transmitting much fewer particles for controlled teleportation of an arbitrary multiparticle GHZ-class state. Moreover,we discuss the application of this scheme by using a nonmaximally entangled state as its quantum channel.     

Stochastic Momentum Cooling——Palmer Cooling at HIRFL-CSRm

The Palmer cooling is always used for large dispersion momentum cooling in storage ring. So it will be used during the stripping injection of HIRFL-CSRm. Here the Palmer cooling is described. The optimum cooling time, optimum gain and optimum cooling bandwidth are obtained in the simulation with Palmer method. Using the Fokker-Planck equation, the particle distribution with respect to the momentum dispersion is also obtained numerically during the stochastic cooling process. This is useful for analysis of experimental data and for design of the cooling system, i.e, optimization of the system passband and gain, specification of accuracy of the signal transmission, etc.     

光纤放大器的半经典分析

本文采用半经典理论分析稀土掺杂光纤中光与介质的相互作用机理,讨论了增益、饱和、光纤归一化频率、泵功率、信号功率及掺杂粒子数浓度等各参数之间的关系.计算与实验结果相符,可用这个理论设计所需特性的光纤放大器或对光纤放大器作进一步的改进.     

非因子化方法研究D~+→ ■~0K~+衰变(英文)

在领头阶和αs 修正阶 ,用QCD因子化方法 ,并对它的软胶子效应用光锥QCD求和规则分析D+ → K0 K+ 衰变过程 ,我们分析发现朴素因子化方法的结果远离实验结果 ,QCD因子化方法结果靠近实验结果 ,但是 ,在QCD因子化方法中 ,若考虑软胶子效应 ,其结果与实验结果相一致 .另外 ,计算发现 ,软胶子效应在该衰变道中有相当大的贡献 ,因此不能被忽略     

Experimental Study on Electrostatic with Two Guiding of Supersonic D20 Molecular Beam Charged Wires

We demonstrate the guiding of a supersonic heavy-water （D2O） molecular beam using a hollow electrostatic field generated by the combination of two parallel charged-wires and two grounded metal-plates, and report some new and preliminary experimental results. In the experiment, we detect the guiding signals by using the method of time-of-flight mass spectrum and study the dependence of the relative transmission of the beam guide on the guiding voltage. Our study shows that the relative transmission of the beam guide is increased linearly with increasing guiding voltage Vguid, and the number of the guided D20 molecules is at least increased by 89.4% when the guiding voltage is ＋20.0k V. Finally, some potential applications of our guiding scheme in the molecule optics are briefly discussed.     

Effect of Reactor Pressure on Qualities of GaN Layers Grown by Hydride Vapour Phase Epitaxy

The influence of reactor pressure on GaN layers grown by hydride vapour phase epitaxy （HVPE） is investigated. By decreasing the reactor pressure from0. 7 to 0.5 mm, the GaN layer growth mode changes from the island-like one to the step flow. The improvements in structural and optical properties and surface morphology of GaN layers are observed in the step flow growth mode. The results clearly indicate that the reactor pressure, similarly to the growth temperature, is One of the important parameters to influence the qualities of GaN epilayers grown by HVPE, due to the change of growth mode.     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

微波消化-固相萃取光度法测定生物样品中的钴

根据 2 - (2 -喹啉偶氮 ) - 1,5 -苯二酚 (QADHB)与钴的显色反应及 C18固相萃取小柱对显色络合物的固相萃取 ,建立了一种测定生物样品中痕量钴的新方法。在 p H=4 .0的 HAc- Na Ac缓冲介质中 ,溴化十六烷基三甲基铵 (CTMAB)存在下 ,QADHB与钴反应生成 2∶ 1稳定络合物 ,该络合物可用 C18固相萃取小柱富集 ,小柱上富集的络合物用乙醇 (内含 2 %乙酸 )洗脱后用光度法测定 ,络合物最大吸收波长为5 80 nm,钴含量在 0— 0 .8μg/m L范围内符合比耳定律 ,摩尔吸光系数 ε=5 .6× 10 4L· mol-1·cm-1。本方法用于几种生物样品的分析 ,结果令人满意。     

强化对流传热场协同唯象机制及其控制

根据对流传热强度与流体中存在的各种内场及其外场的关系,从唯象上阐明了降低温度边界层厚度、增加流体扰动和增加近壁面速度梯度的强化对流传热方法的物理机制,其本质是控制流体中内场及其外场之间的相互协同。给出了当流体中存在内场和外场时强化对流传热场协同控制方法,以此可指导发展强化对流传热单元的新方法。