分布式喇曼光纤放大器在光传输系统中的应用

就分布式喇曼光纤放大器独特的低噪声和灵活的功率调整性质进行了分析，并就它在系统中的应用作了简单的介绍。     

Spectral Properties and Solubilization Location of 2'-Ethylhexyl 4-(N,N-Dimethylamino)benzoate in Micelles

在阳离子、非离子和阴离子表面活性剂胶束溶液中,研究了4-(N,N-二甲氨基)苯甲酸2'-乙基己基酯(EHDMAB)的双重荧光和紫外吸收．当EHDMAB增溶在不同的胶束溶液中,紫外吸收增强,在离子型胶束溶液中,可观察到具有较长波长的EHDMAB分子内扭转电荷转移(TICT)荧光,相反,在非离子型胶束溶液中,可观察到具有较短波长TICT荧光,特别是位于阳离子胶束Stern层中的吡啶阳离子可强烈猝灭EHDMAB分子的双重荧光,所吸收的紫外辐射主要通过TICT荧光和非辐射去活化衰减．按照EHDMAB分子TICT荧光在有机溶剂中的极性依赖性,EHDMAB分子的4-(N,N-二甲氨基)在离子型胶束和非离子型胶束中处于不同的极性环境;根据EHDMAB和表面活性剂分子的结构和大小分析,EHDMAB分子的4-(N,N-二甲氨基)应朝向胶束的极性头基团,而2'-乙基己基链则朝向疏水性的胶束内核．动态荧光猝灭测量为EHDMAB分子在不同胶束中的位置进一步提供了佐证．     

可变增益放大器在脉冲振幅调制式藻类光合活性荧光测量中的应用

微弱信号探测中信号幅度很宽会导致幅度小的信号分辨率低,结合脉冲振幅调制叶绿素光合活性荧光仪中不同强度光源激发下光电倍增管光电流响应,采用多路选择开关D5201G芯片选择I/V转换电路中不同阻值的反馈电阻实现了对输入信号可变增益放大.0～118mV以下输入信号的理论增益值最高可达28.25 dB,同时输入信号的电压幅值最...     

基于复小波包分形理论的爬壁机器人故障检测

通过研究爬壁式机器人的控制和运动特征，提出一种基于复小波包分形理论的故障检测方法．利用复小波包的平移不变性，将爬壁式机器人传感器输出信号分解成独立的频谱，并进行阀值处理和重构，从而有效去除高频噪音并提取故障的特征频率；依据信号分形维数的多尺度不变性，在嵌入维数空间，采用维数最大距离法，确定复小波包域故障信号的关联雏数．仿真实验表明，爬壁式机器人在各种异常工作模式下的故障信号关联维数能比较真实地反映其故障状态空间，同时也验证了故障信号的关联维数低于正常信号的关联维数作为故障发生与否的定量判据的正确性．     

SrFeO3-x可见光下降解亚甲基蓝的光催化性能研究

采用水热及柠檬酸法相结合的方法,制备了钙钛矿型复合氧化物SrFeO3-x(0＜x＜0.5)光催化剂.用X射线衍射(XRD)、紫外可见漫反射光谱(DRS-UV-Vis)、表面光电压谱(SPS)和场致表面光电压谱(EFISPS)表征制备的SrFeO3-x.以亚甲基蓝(MB)为模拟污染物,在可见光(λ≥430nm)照射下,首次考察了钙钛矿型复合氧化物SrFeO3-x的光催化性能,得到了较好的结果.     

瞬变流中气泡动力过程研究

微气泡的生成等基础问题制约着鼓泡脱气技术的发展.本文基于对文丘里鼓泡器内流场的研究,对不同雷诺数下的气泡动力特性进行研究,采用大涡模拟和流体体积法相结合的数值模拟方法,对气泡在不同瞬时动态变化流场下的动力特性进行研究,通过分析气泡在不同湍流下的表面积,气泡球度,以及气泡表面所处的湍流应力,计算气泡所受的破坏应力与聚合应...     

Stabilization of zeylenone in rat plasma by the presence of esterase inhibitors and its LC‐MS/MS assay for pharmacokinetic study

Six esterase inhibitors, namely EDTA·2Na⁺, NaF, phenylmethanesulfonyl fluoride, dichlorvos, bis‐nitrophenyl phosphate (BNPP) and thenoyltrifluoroacetone, and the mixture of NaF and BNPP, were evaluated for the stabilization of labile benzoate containing zeylenone in rat plasma. The mixture appeared to exhibit the most effectively stabilizing effect with the degraded content of zeylenone decreasing from >60% (in the absence of inhibitors) to <6%. Following the stabilization by the addition of NaF (5 mm ) and BNPP (5 mm ), the analytes in rat plasma were acidified by formic acid and extracted into ethyl acetate at 0°C. After chromatographic separation, the detection of zeylenone was performed on a 3200 Q‐Trap with positive ion electrospray mode, monitoring the ion transition m/z 383.2 → 105.0. The method was validated over the range from 2.68 to 1340 ng/mL with inter‐ and intra‐run precision for the quality control samples being less than 6.8%. The assay accuracy was within 100 ± 7.0%. The validated method was successfully applied to a pharmacokinetic study in rats after the intratracheal administration of zeylenone in free drug or polymeric micellar solutions. The results showed that the pulmonary absorption of zeylenone loaded in micelles was significantly retarded compared with that of free drug solutions. Copyright © 2012 John Wiley & Sons, Ltd.     

A generic framework for time-stepping partial differential equations (PDEs): general linear methods,object-oriented implementation and application to fluid problems

Time-stepping algorithms and their implementations are a critical component within the solution of time-dependent partial differential equations (PDEs). In this article, we present a generic framework – both in terms of algorithms and implementations – that allows an almost seamless switch between various explicit, implicit and implicit–explicit (IMEX) time-stepping methods. We put particular emphasis on how to incorporate time-dependent boundary conditions, an issue that goes beyond classical ODE theory but which plays an important role in the time-stepping of the PDEs arising in computational fluid dynamics. Our algorithm is based upon J.C. Butcher's unifying concept of general linear methods that we have extended to accommodate the family of IMEX schemes that are often used in engineering practice. In the article, we discuss design considerations and present an object-oriented implementation. Finally, we illustrate the use of the framework by applications to a model problem as well as to more complex fluid problems.     

Conjugated polymer‐functionalized graphite oxide sheets thin films for enhanced photovoltaic properties of polymer solar cells

In this study, the maleimide‐thiophene copolymer‐functionalized graphite oxide sheets (PTM21‐GOS) and carbon nanotubes (PTM21‐CNT) were developed for polymer solar cell (PSC) applications. The grafting of PTM21‐OH onto the CNT and GO sheets was confirmed using FTIR spectroscopy. PTM21‐CNT and PTM21‐GOS exhibited excellent dispersal behavior in organic solvents. Better thermal stability was observed for PTM21‐CNT and PTM21‐GOS as compared with that for PTM21‐OH. In addition, the optical band gaps of PTM21‐GOS and PTM21‐CNT were lower than that of PTM21‐OH. We incorporated PTM21‐GOS and PTM21‐CNT individually into poly(3‐hexylthiophene) (P3HT)/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) blends for use as photoconversion layers of PSCs. Good distributional homogeneity was observed for PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend film. The UV–vis absorption peaks of the blend films red‐shifted slightly upon increasing the content of PTM21‐GOS or PTM21‐CNT. The band gap energies and LUMO/HOMO energy levels of the P3HT/PTM21‐GOS and P3HT/PTM21‐CNT blend films were slightly lower than those of the P3HT film. The conjugated polymer‐functionalized PTM21‐GOS and PTM21‐CNT behaved as efficient electron acceptors and as charge‐transport assisters when incorporated into the photoactive layers of the PSCs. PV performance of the PSCs was enhanced after incorporating PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013