二维渗流相关长度ξ(p)的幂估计(英文)

相关长度ξ(p)是渗流理论中最重要的一个量。本文对它给出了一个幂估计     

RECOGNITION SEQUENCE SPECIFICITY OF SIGNAL PEPTIDASE I AND THE ROLE OF SIGNAL PEPTIDE IN SECRETION OF PROTEIN IN Bacillus subtilis

By recombinant DNA technology, the N-terminal of the β-protein encoding region of plasmid pUBHO is fused with the structure gene of α-amylase from Bacillus licheniformis. This gene fusion is called βAmy. It is able to transcribe and translate in phase. Protein fusion can be secreted into the medium mediated by β-signal peptide. The efficiency of secretion is about 10% of the synthesized pre-α-amylase. By comparing the secretion capacities and analysing the restriction sites on β-Amy genes and the molecular weights of the mature α-amylase secreted by B. subtilis harbouring different plasmids, it is indicated in vivo that the recognition and cleavage sequence for signal peptidase I of B. subtilis is Ala-Ala-Ala Ala. The results also indicate that the secretion of the α-amylase in B. subtilis is in accordance with the post-translational transportation mode.     

APPLICATION OF MSW-X_α METHOD WITH OVERLAPPING ATOMIC-SPHERE TO IONIZATION POTENTIALS FOR SOME PLANAR ORGANIC MOLECULES

Application of multiple scattered-wave X_α method with overlapping atomic-sphere to ionization potentials is reported for benzene, pyridine, pyrazine, pyrrole and imidazole. The calculated results show that the orbital charges in the intersphere region are non-negative and the energy levels get improvements in orderings.     

Studies of sodium humate/polyacrylamide/clay hybrid hydrogels. I. Swelling and rheological properties of hydrogels

A type of novel hybrid hydrogels from sodium humate (SH), polyacrylamide (PAM), and hydrophilic Laponite clay were prepared using potassium persulfate (KPS) as the initiator and N,N′-methylenebisacrylamide (MBA) as the cross-linker. The structures of the hydrogels were characterized by field emission scanning electron microscope and FTIR. Their swelling properties, swelling mechanism and rheological properties were also investigated. Experiments show that the composite is heterogeneous in the PAM/SH hydrogel system, while the clay collaborates with SH and improves the network structure of PAM/SH/clay hydrogel. High water-absorbing capability is shown for both hydrogel systems. Han plot proves that clay and SH are compatible with PAM for PAM/SH/clay hydrogels.     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

对全入射角负折射二维光子晶体结构和电磁参量的研究

利用二维光子晶体的等频线分析原理和平面波展开方法,得到了使二维光子晶体产生全入射角负折射(All-Angle Negative Refraction,AANR)现象时,入射电磁波的频率取值范围.同时,分析了AANR频率范围随着结构参量(晶格类型、介质棒半径与晶格周期的比值)和电磁参量(介质柱介电常量、本底介电常量、入射电磁波偏振方向)变化的行为.结果表明:固定组成光子晶体的一种介质的介电常量,另一介质的介电常量只有达到一定阈值,才有可能使光子晶体出现AANR现象.在给定两种介质介电常量的条件下,存在使AANR频率范围最大化的结构参量和电磁参量.     

保参数方向的形状可调过渡曲线与曲面

针对保参数方向构造过渡曲线曲面方法的不足, 构造了任意参数曲线曲面间既保持参数方向又具有形状可调性的C¹与C²连续过渡曲线曲面。首先,基于2类带1个自由参数的调配函数,分别构造满足C¹与C²连续的过渡曲线,并讨论基于能量优化模型的最佳过渡曲线构造问题;然后,将所提出的方法推广到过渡曲面的构造。 实例结果表明,2被过渡曲线曲面为任意参数曲线曲面时,利用该方法构造的过渡曲线曲面不仅与2被过渡曲线曲面的参数方向保持一致,而且可利用所带的自由参数对其形状进行调整。通过能量优化模型确定自由参数的取值,可获得尽可能光顺的过渡曲线曲面。 所提方法弥补了保参数方向构造过渡曲线曲面方法的不足,是一种实用的过渡曲线曲面构造方法。     

考虑处置效果的苯系物泄露应急方案生成方法

针对苯系物泄露次生突发环境事件的应急响应问题,研究了基于案例推理和处置效果的应急方案生成方法。首先,在计算案例相似度时,为避免历史案例不全产生的情景要素遗失,基于随机森林算法,结合专家知识构建了权重求解方法,采用案例检索方法得到相似案例集;然后,构建了应急处置效果评估指标体系,以全面评价相似案例对应的处置效果;进一步,考虑多专家评价可弥补决策者知识、经验等的不足,引入了自适应群共识调整算法,得到群体评价意见,通过集结相似度与处置效果,得到了方案的综合评价值并生成最优方案;最后,用算例说明了方法的可行性和有效性。     

控轧控冷技术应用在Bi-2223/Ag超导带材制备过程中的研究

控轧控冷技术在钢铁中厚板材的应用已趋成熟,采用控轧控冷技术制备的中厚板材具有组织均匀、晶粒细小、机械性能高等优点.Bi-2223/Ag超导带材制备过程需经过多次反复的热处理和中间轧制过程,本文结合控轧控冷工艺特点,通过控制带材中间轧制制度和控制热处理冷却速度,研究了压下量和冷却条件对Bi-2223相变和其微观结构的影响,并借助SEM、XRD等方法对带材样品进行了观察,实验结果表明:合理的控轧控冷条件能够改善Bi-2223/Ag的微观结构并能够有效提高其电性能.这为控轧控冷技术在Bi-2223/Ag超导带材制备中的应用提供了初步理论依据,同时为形变热处理工艺提供了新的优化方向.     

无序超导的动力学理论

基于分形振子(fracton)-电子相互作用,提出了一个无序超导的动力学理论;证明了无序超导体中的电子通过交换虚分形振子可能产生一个有效的吸引作用,它使得具有相反波矢和自旋的电子组成库珀对,从而导致超导。本理论从动力学观点导出了渗流超导的临界温度。 关键词：