5,7-二甲氧基香豆素合成方法的改进

以间苯三酚为原料,选甲醇进行甲基化反应制备3,5-二甲氧基苯酚,以丙炔酸乙酯经Pechmann环化反应制备了白柠檬素(5,7-二甲氧基香豆素)。考察了甲基化反应、环化反应的影响因素,结果表明n(间苯三酚)∶n(甲醇)=1∶15,干燥氯化氢为催化剂,75℃反应7h,甲基化收率为82%;n(丙炔酸乙酯)∶n(3,5-二甲氧基苯酚)∶n(无水氯化锌)=1∶3∶1,环化温度为100℃,N2保护下反应2h,环化反应收率为88%,两步反应总收率达73%。目标产物用红外、质谱、核磁分析手段进行了表征和分析。     

蔬菜中重金属含量测定方法的研究状况

综述了目前测定植株中重金属含量的4种主要方法,包括原子荧光光谱法(AFS)、原子吸收分光光度法(AAS)、电感耦合等离子体发射光谱法(ICP-AES)、电感耦合等离子体质谱法(ICP-MS)。分析了不同方法测定植株中重金属含量的原理、适用条件和研究现状,总结了其优缺点。得出电感耦合等离子体质谱法因其性能较强、实用性好的特点而在植株中的重金属含量测定方面具有明显的优势。同时展望了植株中重金属含量测定方法的发展前景。     

Efficient Method for Synthesis of the Derivatives of 5‐Arylidene Barbituric Acid Catalyzed by Aminosulfonic Acid With Grinding

Aminosulfonic acid is an environmentally friendly catalyst. Grinding a mixture of aromatic aldehydes, barbituric acid, and H₂NSO₃H at room temperature (without any solvent) gave 5‐arylidene barbituric acid in high yields, providing a simple and efficient route to synthesis of these compounds.     

Improved staining of phosphoproteins with high sensitivity in polyacrylamide gels using Stains‐All

An improved Stains‐All (ISA) staining method for phosphoproteins in SDS‐PAGE was described. Down to 0.5–1 ng phosphoproteins (α‐casein, β‐casein, or phosvitin) can be successfully selectively detected by ISA stain, which is approximately 120‐fold higher than that of original Stains‐All stain, but is similar to that of commonly used Pro‐Q Diamond stain. Furthermore, unlike the original Stains‐All protocol that was time consuming and light unstable, ISA stain could be completed within 60 min without resorting to protect the gels from light during the whole staining procedure. According to the results, it is concluded that ISA stain is a rapid, sensitive, specific, and economic staining method for a broad application to the research of phosphoproteins.     

Fluorescent staining of protein in SDS polyacrylamide gels by salicylaldehyde azine

As a noncovalent fluorescence probe, in this study, salicylaldehyde azine (SA) was introduced as a sensitive fluorescence‐based dye for detecting proteins both in 1D and 2D polyacrylamide electrophoresis gels. Down to 0.2 ng of single protein band could be detected within 1 h, which is similar to that of glutaraldehyde‐silver stain, but approximately four times higher than that of SYPRO Ruby fluorescent stain. Furthermore, comparative analysis of the MS compatibility of SA stain with SYPRO Ruby stain indicated that SA stain is compatible with the downstream of protein identification by LC‐MS/MS. Additionally, the probable mechanism of the SA stain was investigated by molecular docking. The results demonstrated that the interaction between SA and protein was mainly contributed by hydrogen bonding and hydrophobic forces.     

Synthesis and Crystal Structure of a B-H Activated Compound Containing a Furan Ring and an ortho-Carborane Cage

A new compound [CpCo（Se2C2BIoH9）CH2C（O）C4H30] has been synthesized and characterized by elemental analysis, IR spectroscopy, NMR, MS and single-crystal X-ray diffraction. The complex crystallizes in the monoclinic system, space group P21/c with a = 10.9481（10）, b = 24.6600（12）, c = 25.7430（14） A, β = 100.863（3）°, C42H57B30Co306Se6＂CH2C12＂0.25H20, Mr = 1722.16, V = 6825.6（8） A3, Dc= 1.676 g/cm3, Z = 1 and F（000） = 3346. The molecular structure shows a 1：1 ratio product of the two reactants of 16e half-sandwich complex CpCo（Se2C2B10H10） and alkyne 1-（2-furyl）-2-propyn-l-one. The hydrogen atom in the B（3） position of CpCo（Se2C2B10HIo） has been activated and migrated to the terminal carbon of 1-（2-furyl）- 2-propyn-l-one to form the B-CH2 unit. The title compound molecules are linked and extended further into a one-dimensional chain through atypical hydrogen bonds.     

Enhancement inhibition efficiency of PBTCA depending on the inclusion complex with hydroxypropyl-β-cyclodextrin

For the first time, hydroxypropyl-β-cyclodextrin (HP-β-CD) has been brought in to include 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) in order to enhance inhibition efficiency of PBTCA, which leads a new approach to study oil–gas field corrosion inhibition in the process of acid treatment. Based on the host–guest inclusion reaction, the inclusion complex of PBTCA with HP-β-CD has been prepared in the laboratory. UV–Vis absorption spectrum was applied to study the inclusion behavior of PBTCA with HP-β-CD. The results revealed that PBTCA with HP-β-CD can form a 1:1 stoichiometry inclusion complex. The 1:1 inclusion complex synthesized by using lyophilization was further characterized by Fourier transform infrared spectroscopy. Besides, inhibition effect of the inclusion complex on the corrosion inhibition of Q235 carbon steel has been investigated in 0.1 M sulfuric acid (H₂SO₄) solution using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and scanning electron microscopy (SEM). It was found that the presence of the inclusion complex better achieved the anti-corrosion property in aggressive medium than was the case with alone PBTCA and the highest inhibition efficiency of the inclusion complex over 90 % was obtained, which are suggestive of the active effect of the inclusion complex for improving inhibition efficiency of PBTCA. Meanwhile, the results obtained from SEM further showed that the inclusion complex acts as a more efficient corrosion inhibitor for Q235 carbon steel in H₂SO₄ medium.     

Structural Elucidation of an Elicitor-Active Oligosaccharide,LN-3, Prepared from Algal Laminaran

Abstract

The primary structure of an elicitor-active oligosaccharide, LN-3, prepared from partially hydrolyzed algal laminaran was determined by means of the analyses of glycosyl-linkage, fragments by acetolysis, and glycosyl-sequence. The elicitor-active oligosaccharide, LN-3, is a pyridylaminated hepta-β-d-glucoside which was shown to have the following linear structure: β-d-Glcp(1→6)-β-d-Glcp(1→3)-β-d-Glcp(1→3)-β-d-Glcp(1→3)-β-d-Glcp(1→6)-β-d-Glcp(1→3)-Glc-PA.     

微波辅助合成石墨烯/氧化镍复合材料及其表征

本文通过微波辅助的方法,快速而有效地在热膨胀石墨烯(RG)的缺陷上原位合成氧化镍纳米颗粒,形成石墨烯/氧化镍复合材料(RG/NiO)。利用X-射线衍射(XRD),拉曼光谱(Raman),傅里叶变换红外(FTIR),扫描电镜(SEM),透射电镜(TEM),热重-差热(TGA-DSC)对所制备样品的结构、形貌和NiO含量在复合材料中的含量进行表征。结果表明,热膨胀石墨烯层数约7~8层,层间距约为0.35nm,缺陷多,在水热和微波处理后抗氧化性明显变差。复合材料中氧化镍颗粒平均粒径为25nm,均匀而密集地分散在石墨烯平面上,同时在复合材料中的含量为19.8%。     

广东省能源需求预测模型构建及实证分析

为了对广东省的能源需求进行准确的预测,首先分析了影响广东省能源需求的各种因素,构建了预测指标体系.在此基础上,针对能源系统非线性等复杂系统特征,结合粒子群算法和BP神经网络的优点,构建了改进的PSO-BP神经网络的预测模型,并通过主成分分析法对指标体系进行数据降维,以降低神经网络的规模和复杂程度.以广东省1985-2013年的能源需求数据进行模拟与仿真,并对2014-2018年的能源需求量进行预测,理论分析和实证研究表明,该方法能够很好的反映广东省能源需求的特征,预测结果较为准确合理.