纳米二氧化钛分离/富集-石墨原子吸收光谱法测定环境样品中痕量镉

以石墨炉原子吸收(GFAAS)为检测手段,研究了纳米二氧化钛(TiO2,锐钛型)对金属Cd(Ⅱ)的吸附性能,考察了吸附和解吸的主要影响因素.结果表明,在较宽的pH范围内,纳米TiO2对Cd(Ⅱ)具有良好的吸附性能,3.0 mol/L HCl能将所吸附的Cd(Ⅱ)完全洗脱.在优化的实验条件下,具有吸附容量大、吸附速度快的特点.本法的检出限(3σ)为10.6 ng/L;相对标准偏差(RSD)为1.5%,(n=7,C=2.0 μg/L),富集50倍.本法测定标准样品的测定值与参考值吻合.用于土壤类样品中Cd(Ⅱ)的测定,结果令人满意.     

从头计算方法比较TiSi_2的C54相和C49相

采用平面波超软赝势描述多电子体系,利用密度泛函理论和广义梯度近似,计算出C54相和C49相TiSi2的晶格常数、体弹性模量、形成能、电子态密度(DOS)和Mulliken电荷布居等性质.通过比较这两种物质的性质,发现尽管两者形成能很相近,但C49相结构对称性差、体弹性模量小、熔点低,Ti原子d轨道的反键强、离子性弱.这些性质上的差异和C49相TiSi2在固相反应中优先形成有关.     

极性介质中醋酸乙烯酯的辐照引发分散聚合

用钴 60γ射线引发醋酸乙烯酯的分散聚合 ,通过选择各种极性溶剂体系 ,确立了醋酸乙烯酯在极性介质中稳定的分散聚合体系 .对异丙醇 水体系 ,聚合物分子量随剂量率的降低、稳定剂含量的增加、单体浓度的增大、反应温度的升高以及醇水比的降低而增加 .运用XPS、元素分析等表征聚合物粒子 ,及通过辐射接枝理论的分析 ,可以判断稳定剂所起的稳定作用主要是以物理吸附为主     

二(β-二酮)氧钒(Ⅳ)与含氮碱加合物的合成和表征

合成了一系列VO(β-dik)_2L类型加合物,其中β-dik分别为苯甲酰丙酮,2-噻吩甲酰三氟丙酮,L3-甲基吡啶、4-甲基吡啶、吗啉、异喹啉,VO(bza)_2Mor、VO(tta)_2Mor、VO(tta)_2iso-q为首次合成,并通过元素分析、摩尔电导、红外光谱、电子光谱、顺磁共振波谱等对加合物进行了较系统的表征工作。     

蝎型钒氧配合物的合成、结构及量子化学研究

设计合成了两种新型的以聚类吡唑硼酸盐为配体的钒氧配合物VO(acac)[HB(pz)3](1)和VO(acac)[HB(3,5-Me2pz)3]·CH3CN(2). 运用元素分析、 红外光谱和紫外光谱对所合成的配合物进行了表征, 并用X射线衍射测定了它们的晶体结构. 同时, 采用量子化学的Hartree Fock方法和自然轨道分析方法(NBO), 使用3-21G*(6d, 7f)基组计算得到了两个分子体系的分子轨道、原子电荷以及键级, 并对其结构进行了分析.     

Hydroxylation of nigranoic acid to 6β-hydroxynigranoic acid by Caryospora carllicarpa YMF1.01026

Microbial transformation of nigranoic acid by Caryospora carllicarpa YMF1.01026 afforded the new derivative 6β-hydro-xynigranoic acid. Its structure was elucidated by spectroscopic methods.     

单斜层状LiMnO2的球磨-离子交换法合成及其电化学性能研究

通过球磨促进固相反应法合成出了具有单斜层状结构的前驱物NaMnO₂，随后通过离子交换得到了单斜层状LiMnO₂。XRD测试结果显示产物为单相。扫描电镜(SEM)和透射电镜(TEM)观测结果显示LiMnO₂的粒子尺寸为300～500 nm，HRTEM分析显示干扰条纹的间距为0.485 nm，基本对应于m-LiMnO₂的(001)晶面间距。红外吸收光谱(IR)和X射线光电子能谱(XPS)被用来测量m-LiMnO₂中Mn-O键的伸缩和弯曲振动吸收和Mn元素的价态。合成的m-LiMnO₂在电化学充放电循环初期表现了较好的电化学性能，但其循环寿命仍需要进一步改善。     

USING MEASURING METHOD TO FIND AREA OF ENCLOSED PLANE REGION AND VOLUME OF ENCLOSED SPACE REGION

Two simple methods to calculate the area and volume called improved square gridmethod and cube cutting method are proposed in this paper. For any plane curve orspace surface satisfying certain conditions, by our method, the error of measurement isof the second infinitive order of measuring unit (the side length of the square grid or theside length of the little cube) when the unit is small enough. And when some properties ofthe curve or the surface can be found or its varying bounds can be evaluated, it is pointedout, in order to make the error smaller than any given value, how small the length of themeasuring unit should be.     

Tris(2,2''''-bipyridyl)ruthenium(Ⅱ) electrochemiluminescence (ECL) enhanced by rutin on platinum electrode

Ru(bpy)_(3~(2 )) electrochemiluminescence (ECL) was applied to determination of rutin. ECL intensity of Ru(bpy)_(3~(2 ))could be enhanced in the presence of rutin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50 mmol/L.     

Zweikernige silylenverbrückte Cyclopentadienylrhodiumbis(ethen)-Komplexe,photochemische Reaktion mit Benzolderivaten und selektiver Einschluß von Methylcyclopentan in das Kristallgitter von [Me2Si{3-But-C5H3Rh(C2H4)2}2]

Dinuclear Silylene Bridged Cyclopentadienylrhodiumbis(ethene) Complexes, Photochemical Reaction with Benzene Derivatives, and Selective Inclusion of Methylcyclopentane into the Crystal Lattice of [Me₂Si{3-Bu^t-C₅H₃Rh(C₂H₄)₂}₂] By reaction of [{(C₂H₄)₂RhCl}₂] with Na₂[Me₂Si(C₅H₄)₂] or with Li₂[Me₂Si(3-Bu^t-C₅H₃)₂] in THF the dinuclear silylene bridged complexes [Me₂Si{C₅H₄Rh(C₂H₄)₂}₂] 1 and [Me₂Si{3-Bu^t-C₅H₃Rh(C₂H₄)₂}₂] 2 , respectively, were synthesized. Due to the asymmetric substitution of the five-membered rings and their hindered rotation around the Si? C axes, 2 is formed as three isomers. The X-ray structure analysis of 2 obtained from hexane reveals the selective inclusion of methylcyclopentane, the content of which in the solvent is about 17%, into the crystal lattice. UV irradiation of 1 in hexane in the presence of benzene causes elimination of the ethene ligands yielding the μ-η³:η³ benzene complex [Me₂Si(C₅H₄Rh₂)₂C₆H₆] which cannot be separated from unreacted 1 . However, separation is possible in case of the hexamethylbenzene compound 4 analogous with 3 .